Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied.While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Great Plains Manufacturing, Incorporated Trademarks

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Table of Contents (continued)

B1029N+) (S/N B1111Q+) (S/N B1059S+)..........140

Closing Wheel Drop Mount........................................142

Press Wheel Breakdown............................................144

Hydraulics..............................................................146

Lift Hydraulics 4 Row..................................................146

Lift Hydraulics 6 and 8 Row........................................148

Fan Hydraulics (YP425A S/N B1008N-) (YP625A S/N

B1043Q-) (YP825A S/N B1014S-).......................150

Fan Hydraulics (YP425A S/N B1009N+) (YP625A S/N

B1044Q+) (YP825A S/N B1015S+).....................152

PTO Hydraulic Pump Assembly Dry Fertilizer............154

PTO Hydraulic Pump Assembly w/o Fertilizer............156

Fertilizer.

158

Press Wheel Assembly RH Long (S/N B1008N-) (S/N

B1043Q-) (S/N B1014S-).....................................128

Press Wheel Assembly RH Long (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S - B1058S). 130 12-12D Cast Press Wheels (S/N B1029N+) (S/N

B1111Q+) (S/N B1059S+)...................................132

Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1029N+)

(S/N B1111Q+) (S/N B1059S+)...........................134

Press Wheel Assembly with Spider Wheels (S/N B1008N-)

(S/N B1043Q-) (S/N B1014S-).............................136

Press Wheel Assembly with Spider Wheels (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S -

B1058S)...............................................................138

Press Wheel Assembly with Spider Wheels (S/N

YP425 PTO Hydraulic Pump Assembly with Liquid

Liquid Fertilizer Pump Mounting (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................196

Liquid Fertilizer Drive (YP425A S/N B1008N-) (YP625A

S/N B1043Q-) (YP825A S/N B1014S-)................198

Liquid Fertilizer Drive (YP425A S/N B1009N+) (YP625A

S/N B1044Q+) (YP825A S/N B1015S+)..............200

John-Blue Pump (831-110C).....................................204

Liquid Fertilizer Coulter..............................................206

Banjo Strainer (831-078C).........................................208

Cam Lock Ball Valve (829-048C)...............................210

1 1/2 Mani 3 Way Ball Valve (829-126C)....................212

AccuShot Liquid Fertilizer...................................214

AccuShot Tank Mounting............................................214

AccuShot Liquid Fertilizer Plumbing..........................216

AccuShot Hydraulics..................................................218

AccuShot Monitor System..........................................220

AccuShot 6 Row Wetboom.........................................222

AccuShot 8 Row Wetboom.........................................224

Monitor...................................................................226

Monitor.......................................................................226

Monitor Wide Row......................................................228

Marker....................................................................230

Flat Fold Marker.........................................................230

Marker Disc Assembly (113-563S).............................232

Decals....................................................................234

Decal Placement........................................................234

YP625A and YP825A PTO Hydraulic Pump Assembly

with Liquid Fertilizer.............................................160

Marker Hydraulics......................................................162

Hydraulic Hose Grips.................................................164

Energy Hydraulic Cylinder (810-304C).......................166

Energy Hydraulic Cylinder (810-305C).......................168

Energy Hydraulic Cylinder (810-306C).......................170

Hydraulic Cylinder (810-822C)...................................172

Hydraulic Cylinder (810-823C)...................................174

Hydraulic Cylinder (810-824C)...................................176

Marker Midway Hydraulic Cylinder (810-196C)..........178

Marker Sequence Valve (810-197C)..........................180

Liquid Fertilizer.....................................................182

Part Number Index,

236

Liquid Fertilizer Plumbing 4 Row (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-).182 Liquid Fertilizer Plumbing 4 Row (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................184

Liquid Fertilizer Plumbing 6 and 8 Row (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)..............................................................186

Liquid Fertilizer Plumbing 6 and 8 Row (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................188

Liquid Fertilizer to Frame............................................190

Liquid Fertilizer Pump Mounting (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-).194

Alphabetized Table of Contents

Selected Models

1 1/2 Mani 3 Way Ball Valve (829-126C).........................212

12-12D Cast Press Wheels (S/N B1029N+) (S/N B1111Q+) (S/N B1059S+).........................................................132

25 Series Air Meter Assembly (YP425A S/N B1046N-)

(YP625A S/N B1197Q-) (YP825A S/N B1290S-).......80

25 Series Air Meter Assembly (YP425A S/N B1047N+) (

YP625A S/N B1198Q+) (YP825A S/N B1291S+).......76

25 Series Keeton Seed Firmer (Option)............................98

25 Series Side Depth Wheel Scraper Assembly.............112

3 Bushel Hopper Mounting (YP425A S/N B1053M+) (YP625A S/N B1202Q+) (YP825A S/N B1296S+).....................96

4, 6 Air Delivery Wide Row................................................28

4, 6 and 8 Air Delivery.......................................................26

8 Air Delivery Wide Row....................................................30

AccuShot 6 Row Wetboom.............................................222

AccuShot 8 Row Wetboom.............................................224

AccuShot Hydraulics.......................................................218

AccuShot Liquid Fertilizer Plumbing...............................216

AccuShot Monitor System...............................................220

AccuShot Tank Mounting.................................................214

Air Pressure Assembly......................................................32

Banjo Strainer (831-078C)..............................................208

Cam Lock Ball Valve (829-048C)....................................210

Closing Wheel Drop Mount.............................................142

Contact Drive (YP425A S/N B1008N-) (YP625A S/N

B1043Q-) (YP825A S/N B1014S-)..............................48

Contact Drive (YP425A S/N B1009N+) (YP625A S/N

B1044Q+) (YP825A S/N B1015S+)............................50

Contact Wheel Assembly..................................................60

Decal Placement.............................................................234

Dry Fertilizer 2 Outlet Hopper...........................................18

Dry Fertilizer Coulter.......................................................116

Dry Fertilizer Drive............................................................56

Dry Fertilizer Drive Twin Row and Wide Row....................58

Dry Fertilizer Hopper.........................................................14

Dry Fertilizer Hopper Mounting.........................................16

Energy Hydraulic Cylinder (810-304C)...........................166

Energy Hydraulic Cylinder (810-305C)...........................168

Energy Hydraulic Cylinder (810-306C)...........................170

Fan Hydraulics (YP425A S/N B1008N-) (YP625A S/N

B1043Q-) (YP825A S/N B1014S-)............................150

Fan Hydraulics (YP425A S/N B1009N+) (YP625A S/N

B1044Q+) (YP825A S/N B1015S+)..........................152

Fan Mounting....................................................................22

Flat Fold Marker..............................................................230

Gauge Wheel (YP425A S/N B1008N-) (YP625A S/N

B1043Q-) (YP825A S/N B1014S-)..............................66

Gauge Wheel (YP425A S/N B1009N - B1019N) (YP625A S/N B1044Q - B1096Q) (YP825A S/N B1015S -

B1040S)......................................................................68

Gauge Wheel (YP425A S/N B1020N+) (YP625A S/N

B1097Q+) (YP825A S/N B1041S+)............................70

Hopper Mounting (YP425A S/N B1012N-) (YP625A S/N

B1057Q-) (YP825A S/N B1016S-)..............................90

Hopper Mounting (YP425A S/N B1013N - B1052N) (YP625A S/N B1058Q - B1201Q) (YP825A S/N B1017S -

B1295S)......................................................................92

Hopper Mounting (YP425A S/N B1053N+) (YP625A S/N

B1202Q+) (YP825A S/N B1296S+)............................94

Hub Assembly (402-321S) (YP425A S/N B1019N-) (YP625A

S/N B1096Q-) (YP825A S/N B1040S-).......................72

Hub Assembly (402-410S) (YP425A S/N B1020N+) (YP625A

S/N B1097Q+) (YP825A S/N B1041S+).....................74

Hub Assembly (815-255C and 204-084S)......................100

Hydraulic Cylinder (810-822C)........................................172

Hydraulic Cylinder (810-823C)........................................174

Hydraulic Cylinder (810-824C)........................................176

Hydraulic Hose Grips......................................................164

John-Blue Pump (831-110C)..........................................204

LED Lights (YP425A S/N B1036N+).................................40

LED Lights (YP625A S/N B1152Q - B1206Q) (YP825A S/N

B1142S - B1377S)......................................................38

LED Lights (YP625A S/N B1207Q+) (YP825A S/N

B1378S+)....................................................................42

Lift Hydraulics 4 Row......................................................146

Lift Hydraulics 6 and 8 Row............................................148

Lights (YP425A S/N B1012N-) (YP625A S/N B1057Q-)

(YP825A S/N B1016S-)..............................................34

Lights (YP425A S/N B1013N - B1035N) (YP625A S/N B1058Q - B1152Q) (YP825A S/N B1017S -

B1141S)......................................................................36

Liquid Fertilizer Coulter...................................................206

Alphabetized Table of Contents (continued)

(YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................196

Liquid Fertilizer Tank and Saddle.................................10

Liquid Fertilizer Tank Support.......................................12

Liquid Fertilizer to Frame............................................190

Marker Disc Assembly (113-563S).............................232

Marker Hydraulics......................................................162

Marker Midway Hydraulic Cylinder (810-196C)..........178

Marker Sequence Valve (810-197C)..........................180

Monitor.......................................................................226

Monitor Wide Row......................................................228

Liquid Fertilizer Drive (YP425A S/N B1008N-) (YP625A

S/N B1043Q-) (YP825A S/N B1014S-)................198

Liquid Fertilizer Drive (YP425A S/N B1009N+) (YP625A

S/N B1044Q+) (YP825A S/N B1015S+)..............200

Liquid Fertilizer Plumbing 4 Row (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-).182 Liquid Fertilizer Plumbing 4 Row (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................184

Liquid Fertilizer Plumbing 6 and 8 Row (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N

B1014S-)..............................................................186

Liquid Fertilizer Plumbing 6 and 8 Row (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N

B1015S+).............................................................188

Liquid Fertilizer Pump Mounting (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-).194 Liquid Fertilizer Pump Mounting (YP425A S/N B1009N+)

Opener Arms and Mounts............................................84

Opener Body................................................................86

Press Wheel Assembly (S/N B1008N-) (S/N B1043Q-)

(S/N B1014S-).....................................................120

Press Wheel Assembly (S/N B1009N - B1028N) (S/N

B1044Q - B1110Q) (S/N B1015S - B1058S).......122

Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1029N+)

(S/N B1111Q+) (S/N B1059S+)...........................134

Press Wheel Assembly LH Short (S/N B1008N-) (S/N

B1043Q-) (S/N B1014S-).....................................124

Press Wheel Assembly LH Short (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S - B1058S).126 Press Wheel Assembly RH Long (S/N B1008N-) (S/N

B1043Q-) (S/N B1014S-).....................................128

Press Wheel Assembly RH Long (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S - B1058S). 130 Press Wheel Assembly with Spider Wheels (S/N B1008N-)

(S/N B1043Q-) (S/N B1014S-).............................136

Press Wheel Assembly with Spider Wheels (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S -B1058S)...............................................................138

Press Wheel Assembly with Spider Wheels (S/N

B1029N+) (S/N B1111Q+) (S/N B1059S+)..........140

Press Wheel Breakdown............................................144

PTO Hydraulic Pump Assembly Dry Fertilizer............154

PTO Hydraulic Pump Assembly w/o Fertilizer............156

Rigid 13" Row Cleaner...............................................102

Row Cleaner Extension Mount...................................104

Row Cleaner Unit Mount Assembly............................106

Seed Lok 6" (404-093K).............................................108

Side Depth Wheel Assembly......................................110

Single Arm RC Assembly...........................................114

Spring and Wheel Wrench Mounting (YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N

B1016S-)................................................................44

Spring and Wheel Wrench Mounting (YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N

B1017S+)...............................................................46

Sprocket Storage..........................................................64

Tongue to Frame and Fertilizer.......................................8

Transmission (YP425A S/N B1008N-) (YP625A S/N

B1043Q-) (YP825A S/N B1014S-).........................52

Transmission (YP425A S/N B1009N+) (YP625A S/N

B1044Q+) (YP825A S/N B1015S+).......................54

Twin Row and Wide Row Dry Fertilizer Hopper

Mounting................................................................20

Unit Mount Coulter.....................................................118

YP425 PTO Hydraulic Pump Assembly with Liquid

Fertilizer...............................................................158

YP625A and YP825A PTO Hydraulic Pump Assembly with Liquid Fertilizer.............................................160

General Information

Using This Manual

Manual Replacement Information

This manual is divided into sections. The first section con

Replacement manuals are available. Refer to your dealer

tains General Information, a Table of Contents, an or the Great Plains Publications Catalog for additional

Alphabetical Page Index, and a Part Number Index. The

information.

remaining sections divide the machine into segments (i.e

Frames, Drives, Hydraulics, etc.) which illustrate and list

Manual Revisions

all parts.

When this manual is revised, the modification date is print

The Great Plains parts in this manual are specially de ed on the front cover and on the revised page(s).

signed for this machine and should be replaced with Great

Plains parts only.

The information in this manual is current at printing. Some parts may change to assure top performance.

Touch-up Paint

Repaint parts where paint is worn or scratched to prevent rust. Aerosol touch-up paint is available. To order use

Great Plains parts numbers below:

Right-hand and left-hand as used in this manual are deter-

GP Green................821

001C

mined by facing the direction the machine will travel while

GP Black................821

002C

in use.

GP Beige................821

003C

Below is an example of two facing pages from a parts

GP Buckskin.............821

004C

manual. Familiarize yourself with the contents of these pages.

Illustration

Heading

Illustration

ustration

Number

Manual

Number

Serial

ustration

Illustration

Parts

Number Break

Page

Number

Page

rTongue & Pull Bar (S/N 00000-)

x/x/xxxx

Tongue Sj Pull Bar (S/N 00000-)

26167 177-004H 177-005H

806- 032C 804-022C

803- 021C 802-183C

802- 083C

804- 015C

803- 020C 177-587D

807- 023C

801- 026C

804- 013C 804-012C 177-009D 177-008D

802- 177C 804-023C

803- 027C 803-037C 806-028C 890-118C 802-299C 890-182C

x/x/xxxx

PULL BAR WELDMENT LH PULL BAR WELDMENT RH U-BOLT 5/8-11 X3 17/32 UNEVEN WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT RHSNB 1/2-13X1 GR5 HFSS 1/2-13X1 1/4 GR8 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SAFETY CHAIN WASHER SPRING HOSE LOOP SCREW HEX 3/8-16X1 TYPE F WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT CLEVIS HITCH TOP HALF CLEVIS HITCH BOTTOM HALF RHSNB 3/4-10X2 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NUT HEX WHIZ 1/2-13 PLT U-BOLT 1/2-13 X 3 17/32 X4 3/4 SCREW JACK 2000#

RHSNB 3/4-10X3 GR5 SAFETY CHAIN 10000 LB

Parts List

Page

Number

New or Modification

Manual

Date

Number

Hardware Legend

AR	As Required
BLADE	Blade Bolt
C	Cap Screw
CP	Cotter Pin
CPHSSS	Cup Point Hex Socket Set Screw
CPSHSS	Cup Point Square Head Set Screw
CPSQHSS	Cup Point Square Head Set Screw
CRFCHMS	Cross Recess Flat Countersunk Head Mach. Screw
CRPHMS	Cross Recess Pan Head Machine Screw
CRPHTFS	Cross Recess Pan Head Thread Forming
CRRHMS	Cross Recess Round Head Machine Screw
CRTHMS	Cross Recess Truss Head Machine Screw
CSNB	Countersunk Square Neck Bolt
FHMS	Flat Head Machine Screw
FTC	Full Thread Cap Screw
H	Hex Nut
HCLN	Hex Center Lock Nut
HFLCS	Hex Flange Lock Cap Screw
HFS	Hex Flange Screw
HFSLN	Hex Flange Serrated Lock Nut
HFSS	Hex Flange Serrated Screw
HHCS	Hex Head Cap Screw or Metric Bolt
HSBHCS	Hex Socket Button Head Cap Screw
HSFCHCS	Hex Socket Flat Countersunk Head Cap Screw
HSHCS	Hex Socket Head Cap Screw
HSSS	Hex Socket Head Screw
HTLN	Hex Top Lock Nut
HWHCS	Hex Washer Head Cap Screw

HWHMS	Hex Washer Head Machine Screw
HXBHCS	Hex Socket Button Head Cap Screw
J	Hex Jam Nut
JIC	37 Degree Tapered Thread
L	Helical Spring Lock Washer
LUG	Lug Bolt
NFC	National Fine Cap Screw
NPSM	National Pipe Straight Mechanical
NPTF	National Pipe Taper Fuel
P	Wide Plain Washer
PHMS	Pan Head Machine Screw
PLOW	Plow Bolt
RHMS	Round Head Machine Screw
RHSNB	Round Head Square Neck Bolt
SCREW LEVELING	Leveling Screw
SCREWTHUMB	Thumb Screw
SCREW WELD	Weld Screw
SFCHMS	Slotted Flat Countersunk Head Machine Screw
SFHMS	Slotted Fillister Head Machine Screw
SP	Special
SP SCREW	Special Screw
SQHSS	Square Head Set Screw
SRHMS	Slotted Round Head Machine Screw
SSS	Socket Set Screw
STCS	Self Tapping Cap Screw
STHMS	Slotted Truss Head Machine Screw
WHEEL	Wheel Studs and Hub Long Bolts
WING	Wing Bolt

Replacement Hardware

The Hardware Legend above lists hardware abbreviations used iri the parts lists. All bolts and nuts are grade 5 unless otherwise noted. The use of improper grades of hardware can result In personal injury, damage to equipment, or loss of property.

Serial Numbers

Always use the serial and model number when ordering parts. Refer to the operator’s manual for serial number plate location.

(S/N 20001 + or Includes serial numbers 20001

S/N 20001 and above) and above (to the latest number)

(S/N 10001^20000) Includes serial numbers between 10000 and 20001

(S/N 10000- or Includes serial numbers 10000

S/N 10000 and below) and below (to the earliest number)

(Applies to YP425A, YP625A, YP825A only)

29868

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
1.	dwg29868 401-023H	Image No. TONGUE WELDMENT
2.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
3.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
4.	802-068C	HHCS 3/4-10X4 GR5
5.	890-245C	SCREW JACK 2000# 15-30 TOP WND
6.	802-055C	HHCS 5/8-11X2 GR5
7.	401-002D	CAP, FRAME	Used without Markers
8.	802-159C	HHCS 5/16-18X1 GR5
9.	804-009C	WASHER LOCK SPRING 5/16 PLT
10.	502-068D	HYD HOSE CLAMP BRACKET
11.	804-023C	WASHER LOCK SPRING 3/4 PLT
12.	803-027C	NUT HEX 3/4-10 PLT
13.	803-263C	NUT HEX FLANGE LOCK 5/8-11 PLT
14.	401-022H	HITCH WELDMENT
15.	802-262C	HHCS 5/8-11X7 GR5
16.	177-587D	SAFETY CHAIN WASHER
17.	802-064C	HHCS 3/4-10X2 GR5
18.	890-182C	SAFETY CHAIN 10000 LB
19.	401-648H	4-30 MAIN FRAME WELDMENT	Used with 4 Row only
19.	401-649H	6-30 MAIN FRAME WELDMENT	Used with 4 row wide & 6 Row only
19.	401-650H	8-30 MAIN FRAME WELDMENT	Used with 6 Row wide & 8 Row only
19.	401-711H	8-WIDE MAIN FRAME WELDMENT	Used with 8 Row wide only
20.	407-257H	FERT BAR WELD 4-30	Used with 4 Row only
20.	407-001H	FERT BAR WELD	Used with 6 Row only
20.	407-012H	FERT BAR 8-30 WELD	Used with 8 Row only
20.	407-445H	FERT BAR 8-36 WELD	Used with 8 row wide only
21.	807-023C	SPRING HOSE LOOP
22.	802-079C	HHCS 3/8-16X1 1/4 GR5
23.	804-011C	WASHER FLAT 3/8 USS PLT
24.	804-013C	WASHER LOCK SPRING 3/8 PLT
25.	803-014C	NUT HEX 3/8-16 PLT
26.	401-824H	HITCH WELDMENT SINGLE STRAP
27.	401-826A	HITCH OPTION - SINGLE STRAP	Includes items 13, 15 & 26
28.	411-533H	YP PLANTER WHEEL ARM EXTENSION	Used on 12TR70 and 16TR70
29.	431-447D	PLATE 5/8	spacings only. Used on 12TR70 and 16TR70
30.	802-069C	HHCS 3/4-10X5 GR5	spacings only. Used on 12TR70 and 16TR70
31.	804-025C	WASHER FLAT 3/4 SAE PLT	spacings only. Used on 12TR70 and 16TR70
			spacings only.

(Applies to YP425A, YP625A, YP825A only)

29878

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29878	Image No.
1.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
2.	802-034C	HHCS 1/2-13X1 1/4 GR5
3.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
4.	407-004H	SADDLE WELD	Used with 6 Row Units
4.	407-013H	SADDLE 8-30	Used with both 4 & 8 Row Units
5.	830-216C	SP BHEAD 1 1/2 PO
6.	817-271C	TANK 150 GAL ROUND BUCKSKIN	Used with 6 Row Units
6.	817-272C	TANK 200 GAL ROUND BUCKSKIN	Used with both 4 & 8 Row Units
7.	802-261C	HHCS 3/8-16X2 1/2 GR5 FTHD
8.	67399	RAVEN COVER - 10 BAFFLE VENT
9.	407-011H	TANK SHIELD WELDMENT	Used with 6 Row Units
9.	407-014H	TANK SHIELD 8-30	Used with both 4 & 8 Row Units
10.	802-024C	HHCS 3/8-16X3 GR5
11.	818-323C	DECAL AG CHEMICALS DANGER

(Applies to YP425A, YP625A, YP825A only)

29875

(Applies to YP425A, YP625A, YP825A only)

Rf	Part No.	Part Description	Comments
	dwg29875	Image No.
1.	407-257H	FERT BAR WELD 4-30	Shown Used on 4 Row
1.	407-001H	FERT BAR WELD	Used on 4 Row wide & 6 Row
1.	407-012H	FERT BAR 8-30 WELD	Used on 6 Row wide & 8 Row
1.	407-445H	FERT BAR 8-36 WELD	Used on 8 Row wide
2.	806-139C	U-BOLT 1/2-13 CORNER 5 X 7
3.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
4.	407-003H	LH TANK SUPPORT WELD
5.	407-002H	RH TANK SUPPORT WELD
6.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
7.	803-027C	NUT HEX 3/4-10 PLT
8.	804-023C	WASHER LOCK SPRING 3/4 PLT
9.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
10.	401-648H	4-30 MAIN FRAME WELDMENT	Shown used with 4 Row
10.	401-649H	6-30 MAIN FRAME WELDMENT	Used with 4 Row wide & 6 Row
10.	401-650H	8-30 MAIN FRAME WELDMENT	Used with 6 Row wide & 8 Row
10.	401-711H	8-WIDE MAIN FRAME WELDMENT	Used with 8 Row wide
11.	802-068C	HHCS 3/4-10X4 GR5

Revision

(Applies to YP425A, YP625A, YP825A only)

25314

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg25314	Image No.
1.	817-725C	FERTILIZER HOPPER LID
2.	816-266C	TARP STRAP, DRY FERT
3.	802-012C	HHCS 5/16-18X1 1/2 GR5
4.	803-008C	NUT HEX 5/16-18 PLT
5.	804-009C	WASHER LOCK SPRING 5/16 PLT
6.	804-010C	WASHER FLAT 5/16 USS PLT
7.	407-263D	FERT. HOPPER SIDE STRAP
8.	802-159C	HHCS 5/16-18X1 GR5
9.	407-264D	FERT. HOPPER STRAP
10.	805-010C	PIN HAIR COTTER .094
11.	407-265D	FERT. FLOW DIVIDER
12.	817-724C	FERTILIZER HOPPER
13.	407-251D	AUGER SUPPORT MACHINED
14.	802-270C	RHSNB 5/16-18X1 1/2 GR5
15.	816-567C	RUBBER LATCH 37-20-087-10
16.	802-625C	HHCS 1/4-20 X 2 SS
17.	803-003C	.00 HEX SS 1/4-20 NYLOCK
18.	407-071D	SHAFT, FERT HOPPER
19.	407-148D	AUGER LH, DRY FERT W/HOLE
20.	407-133D	AUGER RH, DRY FERT W/HOLE
21.	890-669C	BRG, DRY FERTILIZER
22.	801-205C	TPHMS Y #10-24 X 1/2 ZNYCR
23.	407-181H	HOPPER BRACKET WELDMENT
24.	816-568C	LATCH KEEPER 37-20-087-10
25.	803-268C	NUT HEX NYLOCK 10-24 PLT
26.	816-052C	HOSE NATIVE GRASS SOLID STAND
27.	800-067C	CLAMP BAND 2 1/2

(Applies to YP425A, YP625A only)

31277

(Applies to YP425A, YP625A only)

Ref	Part No.	Part Description	Comments Revision
	dwg31277	Image No.
1.	407-005H	SPREADER, LH
2.	407-006H	SPREADER, RH
3.	407-257H	FERT BAR WELD 4-30	Used on 4 row
3.	407-012H	FERT BAR 8-30 WELD	Used on 8 row & 6 row wide
3.	407-001H	FERT BAR WELD	Shown used on 6 row & 4 row wide
3.	407-445H	FERT BAR 8-36 WELD	Used on 8 row wide
4.	407-023S	SPKT STORAGE ASSY FERT
5.	417-531D	COUPLER, DRY FERT
6.	407-186L	FERTILIZER LID & HOPPER ASSY	See "Dry Fertilizer Hopper" page for
			breakdown
7.	407-253H	HOPPER MOUNT WELDMENT
8.	407-429L	YP625 DRY FERT TRANS WIDE SNGL	See "Fertilizer Drive" page for
			breakdown
8.	407-428L	YP425 DRY FERT TRANS WIDE SNGL	See "Fertilizer Drive" page for
			breakdown
8.	407-258L	YP4-6-8 DRY FERT TRANSMISSION	See "Fertilizer Drive" page for
			breakdown
8.	407-446L	YP825 DRY FERT TRANS WIDE	See "Fertilizer Drive" page for
			breakdown
9.	407-432H	HOPPER MOUNT WELD LH	Used on 6 row only
10.	407-433H	HOPPER MOUNT WELD RH	Used on 6 row only
11.	407-530D	SHAFT, COUPLER	Used on 4 & 6 row & 8 row center
11.	407-541D	SHAFT, COUPLER	Use 2 on 8 row for outside hoppers only
12.	502-068D	HYD HOSE CLAMP BRACKET
13.	802-017C	HHCS 3/8-16X1 GR5
14.	802-039C	HHCS 1/2-13X3 GR5
15.	802-068C	HHCS 3/4-10X4 GR5
16.	802-172C	HHCS 5/16-18X2 1/2 GR5
17.	803-014C	NUT HEX 3/8-16 PLT
18.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
19.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
20.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
21.	803-263C	NUT HEX FLANGE LOCK 5/8-11 PLT
22.	804-013C	WASHER LOCK SPRING 3/8 PLT
23.	804-025C	WASHER FLAT 3/4 SAE PLT
24.	805-035C	PIN BENT 1/2 X 3 W/HAIRPIN 12B
25.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
26.	806-053C	U-BOLT 5/8-11 X 7 1/32 X 6 1/2
27.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
28.	806-139C	U-BOLT 1/2-13 CORNER 5 X 7
29.	816-052C	HOSE NATIVE GRASS SOLID STAND
30.	800-067C	CLAMP BAND 2 1/2
31.	804-011C	WASHER FLAT 3/8 USS PLT
32.	802-022C	HHCS 3/8-16X1 1/2 GR5
33.	402-022H	SPRKT STORAGE WELD
34.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
35.	808-147C	SPKT 40C15 X 7/8 HEX BORE
36.	808-148C	SPKT 40C17 X 7/8 HEX BORE
37.	808-149C	SPKT 40C19 X 7/8 HEX BORE
38.	808-222C	SPKT 40C21 X 7/8 HEX BORE
39.	808-223C	SPKT 40C32 X 7/8 HEX BORE
40.	808-224C	SPKT 40C41 X 7/8 HEX BORE
41.	808-225C	SPKT 40C44 X 7/8 HEX BORE

(Applies to YP425A, YP625A, YP825A only)

34020

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg34020	Image No.
1.	817-725C	FERTILIZER HOPPER LID
2.	803-268C	NUT HEX NYLOCK 10-24 PLT
3.	407-262D	FERT. LID SPRING
4.	801-205C	TPHMS Y #10-24 X 1/2 ZNYCR
5.	816-568C	LATCH KEEPER 37-25-086-17
6.	802-012C	HHCS 5/16-18X1 1/2 GR5
7.	804-010C	WASHER FLAT 5/16 USS PLT
8.	804-009C	WASHER LOCK SPRING 5/16 PLT
9.	890-669C	BRG, DRY FERTILIZER
10.	816-266C	TARP STRAP, DRY FERT
11.	803-312C	NUT HEX WHIZ 5/16-18 SS
12.	802-087C	HHCS 5/16-18X1 SS
13.	407-263D	FERT. HOPPER SIDE STRAP
14.	407-264D	FERT. HOPPER STRAP
15.	804-085C	WASHER FLAT 5/16 SAE 304SS
16.	816-052C	HOSE NATIVE GRASS SOLID STAND
17.	816-567C	RUBBER LATCH 37-11-086-10
18.	817-901C	DRY FERT HOPPER 4 OUTLET
19.	802-001C	HHCS 1/4-20X3/4 SS
20.	803-187C	NUT HEX WHIZ 1/4-20 18-8 SS
21.	407-662D	2 ROW FERT HOPPER DIVIDER
22.	805-035C	PIN BENT 1/2 X 3 W/HAIRPIN 12B
23.	407-181H	HOPPER BRACKET WELDMENT
24.	802-099C	HHCS 1/2-13X3 1/4 GR5
25.	803-147C	NUT HEX NYLOCK 1/2-13
26.	804-029C	WASHER FLAT 1 SAE
27.	407-564K	2-ROW FERT METER CUP ASSY Includes items 9, 11 & 33-36
28.	805-021C	PIN COTTER 1/4 X 2 PLT
29.	407-677D	SHAFT, DRY FERT HOPPER
30.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
31.	417-531D	COUPLER, DRY FERT
32.	800-067C	CLAMP BAND 2 1/2
33.	407-566H	2-R0W FERT METER WLDMNT
34.	407-665D	2-ROW FERT METER COVER PLT
35.	407-678D	METER BOX SPACER 7/8 LG
36.	817-898C	AGITATOR 8 POINT HALF 7/8 HEX

Twin Row and Wide Row Dry Fertilizer Hopper Mounting

(Applies to YP425A, YP625A, YP825A only)

32173

Twin Row and Wide Row Dry Fertilizer Hopper Mounting

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg32173	Part Description Image No.	Comments Revision
1.	407-257H	FERT BAR WELD 4-30
1.	407-001H	FERT BAR WELD
1.	407-012H	FERT BAR 8-30 WELD
1.	407-445H	FERT BAR 8-36 WELD
2.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
3.	417-531D	COUPLER, DRY FERT
4.	407-106D	SHAFT, COUPLER	Used with 4 Row Twin Row
4.	407-575D	SHAFT, COUPLER 13.75	Used with 6 & 8 Row Twin Row
4.	407-530D	SHAFT, COUPLER	Used with 4 & 6 Row Wide Twin Row & 8 Row Wide Twin Row Center Section Only
4.	407-541D	SHAFT, COUPLER	Used On 8 Row Wide Twin Row
5.	802-172C	HHCS 5/16-18X2 1/2 GR5
6.	802-068C	HHCS 3/4-10X4 GR5
7.	816-052C	HOSE NATIVE GRASS SOLID STAND
8.	800-067C	CLAMP BAND 2 1/2
9.	407-665L	2 OUT DRY FERT HOPPER ASY TWIN Refer to Dry Fertilizer 2 Outlet Hopper for breakdown
10.	407-681H	HOPPER MOUNT WELD RH TR
11.	802-099C	HHCS 1/2-13X3 1/4 GR5
12.	803-147C	NUT HEX NYLOCK 1/2-13
13.	805-035C	PIN BENT 1/2 X 3 W/HAIRPIN 12B
14.	803-021C	NUT HEX 5/8-11 PLT
15.	804-022C	WASHER LOCK SPRING 5/8 PLT
16.	407-682H	HOPPER MOUNT WELD LH TR
17.	806-053C	U-BOLT 5/8-11 X 7 1/32 X 6 1/2
18.	804-025C	WASHER FLAT 3/4 SAE PLT
19.	802-068C	HHCS 3/4-10X4 GR5
20.	407-005H	SPREADER, LH
20.	407-006H	SPREADER, RH
21.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
22.	806-139C	U-BOLT 1/2-13 CORNER 5 X 7
23.	407-023S	SPKT STORAGE ASSY FERT	Includes items 2 & 31-38
24.	802-017C	HHCS 3/8-16X1 GR5
25.	804-013C	WASHER LOCK SPRING 3/8 PLT
26.	803-014C	NUT HEX 3/8-16 PLT
27.	804-011C	WASHER FLAT 3/8 USS PLT
28.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
29.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
30.	407-664L	YP4-6-8 DRY FERT TRANS TWIN	Refer to Dry Fertilizer Twin Row & Wide Twin Row Drive for breakdown
30.	407-676L	YP625 DRY FERT TRANS WIDE TWIN	Refer to Dry Fertilizer Twin Row & Wide Twin Row Drive for breakdown
30.	407-677L	YP825 DRY FERT TRANS WIDE TWIN	Refer to Dry Fertilizer Twin Row & Wide Twin Row Drive for breakdown
30.	407-675L	YP425 DRY FERT TRANS WIDE TWIN	Refer to Dry Fertilizer Twin Row & Wide Twin Row Drive for breakdown
31.	402-022H	SPRKT STORAGE WELD
32.	808-225C	SPKT 40C44 X 7/8 HEX BORE
33.	808-224C	SPKT 40C41 X 7/8 HEX BORE
34.	808-223C	SPKT 40C32 X 7/8 HEX BORE
35.	808-222C	SPKT 40C21 X 7/8 HEX BORE
36.	808-149C	SPKT 40C19 X 7/8 HEX BORE
37.	808-148C	SPKT 40C17 X 7/8 HEX BORE
38.	808-147C	SPKT 40C15 X 7/8 HEX BORE

Fan Mounting

(Applies to YP425A, YP625A, YP825A only)

29955

Fan Mounting

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg29955	Part Description Image No.	Comments Revision
1.	401-648H	4-30 MAIN FRAME WELDMENT	Shown Usedwith 4 Row only
1.	401-649H	6-30 MAIN FRAME WELDMENT	Used with 6 Row & 4 Row wide
1.	401-650H	8-30 MAIN FRAME WELDMENT	Used with 8 Row & 6 Row wide
1.	401-711H	8-WIDE MAIN FRAME WELDMENT	Used with 8 Row wide
2.	806-107C	U-BOLT 5/16-18 X 1 17/32X2 1/8
3.	403-692D	PRESSURE GAUGE MOUNT
4.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
5.	891-153C	MAGNEHELIC PRES GAGE-0-6 INH2O
6.	403-609D	MOUNT, AIR PRESSURE GAGE
7.	806-084C	U-BOLT 5/8-11 X 7 1/32 X 9 1/2
7.	806-083C	U-BOLT 5/8-11 X 7 1/32 X 7 1/2	Used with Dry fertilizer only
8.	803-021C	NUT HEX 5/8-11 PLT
9.	804-022C	WASHER LOCK SPRING 5/8 PLT
10.	891-131C	6 HYD FAN W/CASE DRAIN MOTOR	Includes items 32-36 (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)
10.	890-395C	6 HYDRAULIC FAN KIT W/ SCREEN	Shown Includes items 32-36 (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)
11.	401-667H	FAN MOUNT
12.	804-006C	WASHER LOCK SPRING 1/4 PLT
13.	802-224C	HHCS 1/4-20X1 1/4 GR5
14.	800-151C	CLAMP WRM DRV #96SS (4.75-6.5)
15.	816-656C	HOSE 6.0 ID DUCTING X 1.2 FT
16.	802-079C	HHCS 3/8-16X1 1/4 GR5
17.	804-011C	WASHER FLAT 3/8 USS PLT
18.	804-013C	WASHER LOCK SPRING 3/8 PLT
19.	803-014C	NUT HEX 3/8-16 PLT
20.	401-656H	FAN MOUNT WELDMENT
21.	403-361S	SENSOR CHAMBER ASY	Refer to Air Pressure Assembly
22.	802-105C	HHCS 5/8-11X9 GR5
23.	802-800C	HWH #12-14X3/4
24.	817-624C	FAN INLET RAIN SHIELD
25.	890-624C	SCREEN FAN COVER
26.	802-005C	HHCS 1/4-20X1 GR5
27.	804-075C	WASHER FLAT 1/4 USS PLT
28.	848-248C	DECAL FAN BAFFLE INDEX RH
29.	401-537D	DJ FAN SENSOR MOUNT BRKT
30.	890-891C	BUSHING, JA X 20 MM	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)
30.	890-396C	BUSHING - FAN	Shown (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)
31.	800-373C	SQ KEY 6MM X 35MM	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)
31.	168-094D	HYD MOTOR 1/8 KEY	Shown (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)
32.	803-230C	NUT HEX FLANGE 1/4-20 PLT
33.	21121	6 FAN HOUSING RH SIDE
34.	17089	13 FAN IMPELLER
35.	23320	6 FAN HOUSING LH SIDE
36.	802-167C	HHCS 1/4-20X1 1/2 GR5
37.	890-899C	VOLVO HYD MOTOR MOUNT PLT	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)
37.	890-892C	HYDRAULIC MOTOR MOUNT PLT	Shown (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

Table of Contents Part Number Index Fan Mounting (continued)

(Applies to YP425A, YP625A, YP825A only)

Re£	Part No.	Part Description	Comments Revision
38.	810-556C	PARKER F-11 FAN MOTOR	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)
38.	810-273C	HYD MOTOR 7/8ORBF	Shown (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)
39.	804-007C	WASHER FLAT 1/4 SAE PLT
40.	403-338D	METER SPACER TUBE
41.	401-363H	CRARY FAN SHUTTER
42.	411-030D	CRARY FAN SHUTTER DISK
43.	801-055C	SCREW RD HD 10-24 X 1 PLT
44.	803-268C	NUT HEX NYLOCK 10-24 PLT

Table of Contents Part Number Index Fan Mounting (continued)

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

(Applies to YP425A, YP625A, YP825A only)

29956

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29956	Image No.
1.	817-810C	CAP PLUG DWV ABS 4 INCH
2.	801-137C	SCREW HEX SLT 10-16X3/4 PLT
3.	817-830C	TEE DWV ABS 4 X 4 X 4
4.	817-815C	ADAPT DUCTING 4 X DBBL 2	Shown. Used with Twin Row Only
4.	817-816C	ADAPT DUCTING 4 X SING 2	Used with 30" Spacing only
5.	403-576D	TUBE ABS DWV 4 IN X 24.8 LONG
6.	403-562D	ORIFICE PLATE 4 OD X 3.4 ID
7.	403-571D	TUBE ABS DWV 4 IN X 7.1 LONG
8.	817-809C	TEE, 6 IN TO 4 IN
9.	802-078C	HHCS 1/4-20X5/8 GR5
10.	803-007C	NUT LOCK 1/4-20 PLT
11.	802-196C	HFSS 1/4-20X5/8 GR5
12.	818-055C	DECAL SLOW MOVING-GALV. BACKED
13.	406-025D	SMV MOUNT BRACKET
14.	803-230C	NUT HEX FLANGE 1/4-20 PLT
15.	803-068C	NUT HEX FLANGE 3/8-16 PLT
16.	806-191C	U-BOLT 3/8-16X1 17/32X2 1/2
17.	802-172C	HHCS 5/16-18X2 1/2 GR5
18.	403-578D	CLAMP, MANIFOLD 4 INCH
19.	804-009C	WASHER LOCK SPRING 5/16 PLT
20.	803-008C	NUT HEX 5/16-18 PLT
21.	803-021C	NUT HEX 5/8-11 PLT
22.	804-022C	WASHER LOCK SPRING 5/8 PLT
23.	403-690D	AIR PIPE SUPPORT, REAR
24.	806-052C	U-BOLT 5/8-11 X 7 1/32 X 8 1/2
25.	403-691D	TUBE SQ 1 1/2X 14GAX80	Applies to 4 Row
26.	403-559D	ORIFICE PLATE 4 OD X 3.1 ID
27.	403-582D	TUBE SQ 1 1/2X14GX140	Applies to 6 Row
28.	403-558D	ORIFICE PLATE 4 OD X 3.0 ID
29.	403-561D	ORIFICE PLATE 4 OD X 3.3 ID
30.	403-563D	ORIFICE PLATE 4 OD X 3.5 ID
31.	403-533D	TUBE SQ 1 1/2X14GX186	Applies to 8 Row
32.	990-253R	HOSE 2 ID POLYP HELIX
33.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)

(Applies to YP425A, YP625A only)

31280

(Applies to YP425A, YP625A only)

Ref	Part No.	Part Description Comments	Revision
	dwg31280	Image No.
1.	817-810C	CAP PLUG DWV ABS 4 INCH
2.	801-137C	SCREW HEX SLT 10-16X3/4 PLT
3.	817-830C	TEE DWV ABS 4 X 4 X 4
4.	817-815C	ADAPT DUCTING 4 X DBBL 2
5.	403-655D	TUBE ABS DWV 4 IN X 32.4 LONG
6.	403-562D	ORIFICE PLATE 4 OD X 3.4 ID
7.	403-573D	TUBE ABS DWV 4 IN X 11.8 LONG
8.	817-809C	TEE, 6 IN TO 4 IN
9.	802-078C	HHCS 1/4-20X5/8 GR5
10.	803-007C	NUT LOCK 1/4-20 PLT
11.	802-196C	HFSS 1/4-20X5/8 GR5
12.	818-055C	DECAL SLOW MOVING-GALV. BACKED
13.	406-025D	SMV MOUNT BRACKET
14.	803-230C	NUT HEX FLANGE 1/4-20 PLT
15.	803-068C	NUT HEX FLANGE 3/8-16 PLT
16.	806-191C	U-BOLT 3/8-16X1 17/32X2 1/2
17.	802-172C	HHCS 5/16-18X2 1/2 GR5
18.	403-578D	CLAMP, MANIFOLD 4 INCH
19.	804-009C	WASHER LOCK SPRING 5/16 PLT
20.	803-008C	NUT HEX 5/16-18 PLT
21.	803-021C	NUT HEX 5/8-11 PLT
22.	804-022C	WASHER LOCK SPRING 5/8 PLT
23.	403-690D	AIR PIPE SUPPORT, REAR
24.	806-052C	U-BOLT 5/8-11 X 7 1/32 X 8 1/2
25.	403-582D	TUBE SQ 1 1/2X14GX140 Used on 4 Row
26.	403-559D	ORIFICE PLATE 4 OD X 3.1 ID
27.	403-533D	TUBE SQ 1 1/2X14GX186 Used on 6 Row
28.	990-253R	HOSE 2 ID POLYP HELIX
29.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)

(Applies to YP425A, YP825A only)

31323

(Applies to YP425A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg31323	Image No.
1.	817-810C	CAP PLUG DWV ABS 4 INCH
2.	801-137C	SCREW HEX SLT 10-16X3/4 PLT
3.	817-830C	TEE DWV ABS 4 X 4 X 4
4.	817-815C	ADAPT DUCTING 4 X DBBL 2
5.	403-655D	TUBE ABS DWV 4 IN X 32.4 LONG
6.	403-563D	ORIFICE PLATE 4 OD X 3.5 ID
7.	403-573D	TUBE ABS DWV 4 IN X 11.8 LONG
8.	817-809C	TEE, 6 IN TO 4 IN
9.	802-078C	HHCS 1/4-20X5/8 GR5
10.	803-007C	NUT LOCK 1/4-20 PLT
11.	802-196C	HFSS 1/4-20X5/8 GR5
12.	818-055C	DECAL SLOW MOVING-GALV. BACKED
13.	406-025D	SMV MOUNT BRACKET
14.	803-230C	NUT HEX FLANGE 1/4-20 PLT
15.	803-068C	NUT HEX FLANGE 3/8-16 PLT
16.	806-191C	U-BOLT 3/8-16X1 17/32X2 1/2
17.	802-172C	HHCS 5/16-18X2 1/2 GR5
18.	403-578D	CLAMP, MANIFOLD 4 INCH
19.	804-009C	WASHER LOCK SPRING 5/16 PLT
20.	803-008C	NUT HEX 5/16-18 PLT
21.	803-021C	NUT HEX 5/8-11 PLT
22.	804-022C	WASHER LOCK SPRING 5/8 PLT
23.	403-690D	AIR PIPE SUPPORT, REAR
24.	806-052C	U-BOLT 5/8-11 X 7 1/32 X 8 1/2
25.	403-581D	TUBE SQ 1 1/2X14GX228
26.	403-558D	ORIFICE PLATE 4 OD X 3.0 ID
27.	403-561D	ORIFICE PLATE 4 OD X 3.3 ID
28.	990-253R	HOSE 2 ID POLYP HELIX
29.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)

(Applies to YP425A, YP625A, YP825A only)

29951

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29951	Image No.
1.	806-107C	U-BOLT 5/16-18 X 1 17/32X2 1/8
2.	403-692D	PRESSURE GAUGE MOUNT
3.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
4.	403-609D	MOUNT, AIR PRESSURE GAGE
5.	990-021R	HOSE 1/4 RUBBER AIR
6.	800-395C	CLAMP SPRING BAND 1/2 OD HOSE
7.	830-276C	AD 1/8MNPT X 1/4HB BRASS
8.	891-153C	MAGNEHELIC PRES GAGE-0-6 INH2O
9.	401-656H	FAN MOUNT WELDMENT
10.	803-360C	NUT HEX FLG 3/8-16 GR8 ZNYCR
11.	403-361S	SENSOR CHAMBER ASY	Includes Seven 891-122C
12.	891-194C	CLAMP, 5" OD
13.	891-122C	AD 7/16MORB X 1/4HB BRASS
14.	803-374C	NUT HEX JAM 7/16-20 PLT
15.	811-336C	PL 1/4MNPT

Lights (YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)

(Applies to YP425A, YP625A, YP825A only)

29962

Lights (YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29962	Image No.
1.	890-391C	LIGHT HARNESS, 15' LEAD
2.	890-390C	LIGHT HARNESS, 10' WISHBONE	Used with 4 Row only
2.	890-648C	LIGHT HARNESS, 15' WISHBONE	Used with 6 & 8 Row only
3.	890-311C	DUAL AG LIGHTS LH	Shown
3.	890-312C	DUAL AG LIGHTS RH
4.	406-026D	LIGHT MOUNTING BRACKET
5.	801-081C	SCREW HEX SELF TAP 1/4-20X3/4
6.	800-112C	CABLE TIE .19X7.25 1.75D 50LB
7.	802-017C	HHCS 3/8-16X1 GR5
8.	804-013C	WASHER LOCK SPRING 3/8 PLT
9.	803-014C	NUT HEX 3/8-16 PLT

Lights (YP425A S/N B1013N - B1035N) (YP625A S/N B1058Q - B1152Q) (YP825A S/N B1017S - B1141S)

(Applies to YP425A, YP625A, YP825A only)

32227

Lights (YP425A S/N B1013N - B1035N) (YP625A S/N B1058Q - B1152Q) (YP825A S/N B1017S - B1141S)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments Revision

	dwg32227	Image No.
1.	890-391C	LIGHT HARNESS, 15' LEAD
2.	890-390C	LIGHT HARNESS, 10' WISHBONE
2.	890-648C	LIGHT HARNESS, 15' WISHBONE
3.	890-311C	DUAL AG LIGHTS LH
3.	890-312C	DUAL AG LIGHTS RH
4.	406-027D	LIGHT MOUNTING BRACKET
5.	801-081C	SCREW HEX SELF TAP 1/4-20X3/4
6.	800-112C	CABLE TIE .19X7.25 1.75D 50LB
7.	802-017C	HHCS 3/8-16X1 GR5
8.	804-013C	WASHER LOCK SPRING 3/8 PLT
9.	803-014C	NUT HEX 3/8-16 PLT

Used with 4 Row only Used with 6 & 8 Row only Shown

LED Lights (YP625A S/N B1152Q - B1206Q) (YP825A S/N B1142S - B1377S)

(Applies to YP625A, YP825A only)

36036

LED Lights (YP625A S/N B1152Q - B1206Q) (YP825A S/N B1142S - B1377S)

(Applies to YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg36036	Image No.
1.	833-694C	LIGHT HRNSS ENHANCE MODULE LED
2.	833-684C	LIGHT HARNESS, 15' LEAD - LED
3.	833-690C	LIGHT HARNESS 15' WISHBONE LED	Used with 6 & 8 Row
4.	833-683C	LIGHT HRNSS, 10' WISHBONE -LED	Used wit 4 Row
5.	801-081C	SCREW HEX SELF TAP 1/4-20X3/4
6.	833-697C	LIGHT, AMBER LAMP LED
7.	833-696C	LIGHT, RED LAMP - LED
8.	406-027D	LIGHT MOUNTING BRACKET
9.	802-015C	RHSNB 3/8-16X1 GR5
10.	804-013C	WASHER LOCK SPRING 3/8 PLT
11.	803-014C	NUT HEX 3/8-16 PLT
12.	800-112C	CABLE TIE .19X7.25 1.75D 50LB

Table of Contents Part Number Index LED Lights (YP425A S/N B1036N+)

(Applies to YP425A only)

36036

Table of Contents Part Number Index LED Lights (YP425A S/N B1036N+)

Frame

(Applies to YP425A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg36036	Image No.
1.	833-694C	LIGHT HRNSS ENHANCE MODULE LED
2.	833-684C	LIGHT HARNESS, 15' LEAD - LED
3.	833-690C	LIGHT HARNESS 15' WISHBONE LED	Used with 6 & 8 Row
4.	833-683C	LIGHT HRNSS, 10' WISHBONE -LED	Used wit 4 Row
5.	801-081C	SCREW HEX SELF TAP 1/4-20X3/4
6.	833-697C	LIGHT, AMBER LAMP LED
7.	833-696C	LIGHT, RED LAMP - LED
8.	406-027D	LIGHT MOUNTING BRACKET
9.	802-015C	RHSNB 3/8-16X1 GR5
10.	804-013C	WASHER LOCK SPRING 3/8 PLT
11.	803-014C	NUT HEX 3/8-16 PLT
12.	800-112C	CABLE TIE .19X7.25 1.75D 50LB

LED Lights (YP625A S/N B1207Q+) (YP825A S/N B1378S+)

(Applies to YP625A, YP825A only)

68536

LED Lights (YP625A S/N B1207Q+) (YP825A S/N B1378S+)

(Applies to YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg68536	Image No.
1.	833-697C	LIGHT, AMBER LAMP LED
2.	406-028D	SINGLE LIGHT MOUNTING BRACKET
3.	801-081C	SCREW HEX SELF TAP 1/4-20X3/4
4.	802-017C	HHCS 3/8-16X1 GR5
5.	804-013C	WASHER LOCK SPRING 3/8 PLT
6.	803-014C	NUT HEX 3/8-16 PLT
7.	800-112C	CABLE TIE .19X7.25 1.75D 50LB
8.	833-696C	LIGHT, RED LAMP - LED
9.	843-012C	LIGHT 16' A 11' R WISHBONE LED
10.	833-684C	LIGHT HARNESS, 15' LEAD - LED
11.	833-694C	LIGHT HRNSS ENHANCE MODULE LED
12.	803-088C	NUT HEX LOCK 1/4-20 FLG
13.	802-370C	HHCS 1/4-20X1 3/4 GR5
14.	421-918D	SMV BRACKET
15.	803-194C	NUT HEX WHIZ 1/4-20 PLT
16.	818-055C	DECAL SLOW MOVING-GALV. BACKED
17.	802-004C	HHCS 1/4-20X3/4 GR5

Table of Contents Part Number Index Spring and Wheel Wrench Mounting (YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)

Spring and Wheel Wrench Mounting (YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Revision

Comments

1.	dwg29963 805-088C	Image No. PIN, HAIR COTTER 3/16 WIRE DIA
2.	403-265D	SPRING AND WHEEL WRENCH
3.	403-175H	WRENCH HOLDER
4.	802-017C	HHCS 3/8-16X1 GR5
5.	804-013C	WASHER LOCK SPRING 3/8 PLT
6.	803-014C	NUT HEX 3/8-16 PLT
7.	403-556H	TIMING TOOL HOLDER
8.	812-391C	TIMING TOOL, 19 TOOTH
9.	805-240C	PIN LINCH 3/16 X 1 9/16 LONG

Spring and Wheel Wrench Mounting (YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)

(Applies to YP425A, YP625A, YP825A only)

32222

Spring and Wheel Wrench Mounting (YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Revision

Comments

1.	dwg32222 805-088C	Image No. PIN, HAIR COTTER 3/16 WIRE DIA
2.	403-265D	SPRING AND WHEEL WRENCH
3.	403-175H	WRENCH HOLDER
4.	802-017C	HHCS 3/8-16X1 GR5
5.	804-013C	WASHER LOCK SPRING 3/8 PLT
6.	803-014C	NUT HEX 3/8-16 PLT
7.	403-556H	TIMING TOOL HOLDER
8.	812-391C	TIMING TOOL, 19 TOOTH
9.	805-240C	PIN LINCH 3/16 X 1 9/16 LONG

Contact Drive (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29893

Contact Drive (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg29893	Image No.
1.	802-041C	HHCS 1/2-13X3 1/2 GR5
2.	804-017C	WASHER FLAT 1/2 USS PLT
3.	817-406C	IDLER 1 PC 2.38X1.01X1.062
4.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
5.	402-025S	LOCK COLLAR, 7/8 HEX W/ SET SC
6.	808-156C	SPKT 40C30 X 7/8 HEX BORE
7.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
8.	804-015C	WASHER LOCK SPRING 1/2 PLT
9.	803-020C	NUT HEX 1/2-13 PLT
10.	822-032C	FLANGETTE 52 MST
11.	822-119C	BRG 7/8HEXX2.05OD SPH
12.	802-282C	RHSNB 5/16-18X1 GR5
13.	402-608D	SHAFT SUPPORT BRACKET
14.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
15.	402-574D	TRANSFER HEX SHAFT 4-ROW
15.	402-565D	TRANSFER HEX SHAFT 6-ROW
15.	402-579D	TRANSFER HEX SHAFT 8-ROW
15.	402-615D	TRANSFER HEX SHAFT 8-ROW WIDE
16.	804-036C	WASHER FLAT 5/16 SAE PLT
17.	402-567D	TRANSFER SHAFT SUPPORT
18.	804-013C	WASHER LOCK SPRING 3/8 PLT
19.	803-014C	NUT HEX 3/8-16 PLT
20.	808-152C	SPKT 40C25 X 7/8 HEX BORE
21.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
22.	402-122H	DOUBLE IDLER WELDMENT
23.	802-143C	HHCS 3/8-16X2 GR5
24.	817-025C	NO. 40 12T IDLER SPKT.
25.	804-016C	WASHER FLAT 1/2 SAE PLT
26.	805-064C	PIN COTTER 7/64 X 1 LONG
27.	804-011C	WASHER FLAT 3/8 USS PLT
28.	402-417D	IDLER SPACER
29.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
30.	136-018D	CHAIN RL #40 107 PITCHES
31.	136-151D	CHAIN RL #40 59 PITCHES
32.	466970014S1	DJ FAN RPM SENSOR THRD HALL
33.	402-427D	HALL EFFECT SENSOR MOUNT
34.	802-224C	HHCS 1/4-20X1 1/4 GR5
35.	804-007C	WASHER FLAT 1/4 SAE PLT
36.	804-006C	WASHER LOCK SPRING 1/4 PLT
37.	803-006C	NUT HEX 1/4-20 PLT
38.	402-262D	DISC, MAG PICKUP
39.	803-032C	NUT HEX JAM 1 1/4-7 PLT

Used with 8 Row only

Used with 4 Row Used with 4 Row wide & 6 Row Used with 6 Row wide & 8 Row Used with 8 row wide

Contact Drive (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

31708

Contact Drive (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg31708	Image No.
1.	802-041C	HHCS 1/2-13X3 1/2 GR5
2.	804-017C	WASHER FLAT 1/2 USS PLT
3.	817-406C	IDLER 1 PC 2.38X1.01X1.062
4.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
5.	402-025S	LOCK COLLAR, 7/8 HEX W/ SET SC
6.	808-156C	SPKT 40C30 X 7/8 HEX BORE
7.	195-376D	7/8 HEX WASHER X .21
8.	804-015C	WASHER LOCK SPRING 1/2 PLT
9.	803-020C	NUT HEX 1/2-13 PLT
10.	822-032C	FLANGETTE 52 MST
11.	822-119C	BRG 7/8HEXX2.05OD SPH
12.	802-282C	RHSNB 5/16-18X1 GR5
13.	402-608D	SHAFT SUPPORT BRACKET
14.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
15.	402-574D	TRANSFER HEX SHAFT 4-ROW
15.	402-565D	TRANSFER HEX SHAFT 6-ROW
15.	402-579D	TRANSFER HEX SHAFT 8-ROW
15.	402-615D	TRANSFER HEX SHAFT 8-ROW WIDE
16.	804-036C	WASHER FLAT 5/16 SAE PLT
17.	402-350H	RANGE SPKT SUPT WELD
18.	804-013C	WASHER LOCK SPRING 3/8 PLT
19.	803-014C	NUT HEX 3/8-16 PLT
20.	808-152C	SPKT 40C25 X 7/8 HEX BORE
21.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
22.	402-352H	SPRING IDLER WELDMENT
23.	802-382C	HHCS 3/8-16X2 1/4 GR5
24.	817-025C	NO. 40 12T IDLER SPKT.
25.	804-016C	WASHER FLAT 1/2 SAE PLT
26.	805-064C	PIN COTTER 7/64 X 1 LONG
27.	804-011C	WASHER FLAT 3/8 USS PLT
28.	402-355S	SPRING IDLER ASSEMBLY
29.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
30.	136-080D	CHAIN RL #40 105 PITCHES
31.	136-059D	CHAIN RL #40 56 PITCHES
31.	136-093D	CHAIN RL #40 60 PITCHES
32.	466970014S1	DJ FAN RPM SENSOR THRD HALL
33.	402-427D	HALL EFFECT SENSOR MOUNT
34.	802-224C	HHCS 1/4-20X1 1/4 GR5
35.	804-007C	WASHER FLAT 1/4 SAE PLT
36.	804-006C	WASHER LOCK SPRING 1/4 PLT
37.	803-006C	NUT HEX 1/4-20 PLT
38.	402-262D	DISC, MAG PICKUP
39.	803-032C	NUT HEX JAM 1 1/4-7 PLT
40.	807-301C	SPRING EXT 1.0ODX3.5LX.085MW
41.	817-778C	BUSHING 1.5OD X 1.25ID X 1.0
42.	802-010C	HHCS 5/16-18X1 1/4 GR5
43.	803-060C	NUT HEX JAM 5/16-18 PLT.

Used with 8 Row only

Used with 4 Row Used with 4 row wide & 6 Row Used with 6 row wide & 8 Row Used with 8 row wide

Includes items 22-26

(YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-) (YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)

Transmission (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29884

Transmission (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Revision

Comments

	dwg29884	Image No.
1.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
2.	402-316H	TRANSMISSION WELDMENT
3.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
4.	188-006V	BRG .880 HEX BORE 205DD
5.	805-428C	PIN SPIROL 1/4X2 HEAVY PLN
6.	402-243D	SHAFT TRANSMISSION
7.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
8.	808-150C	SPKT 40C23 X 7/8 HEX BORE
9.	136-113D	CHAIN RL #40 78 PITCHES
10.	804-016C	WASHER FLAT 1/2 SAE PLT
11.	805-064C	PIN COTTER 7/64 X 1 LONG
12.	817-025C	NO. 40 12T IDLER SPKT.
13.	802-114C	HHCS 3/8-16X2 1/2 GR5
14.	804-010C	WASHER FLAT 5/16 USS PLT
15.	402-122H	DOUBLE IDLER WELDMENT
16.	402-420D	IDLER SPACER
17.	402-568D	SHAFT TRANSMISSION - RANGE
18.	808-152C	SPKT 40C25 X 7/8 HEX BORE
19.	804-013C	WASHER LOCK SPRING 3/8 PLT
20.	803-014C	NUT HEX 3/8-16 PLT
21.	402-076D	COUPLER, SHEAR OUTPUT
22.	402-587D	SHAFT METER DRIVE YP425	Used with 4 Row
22.	402-590D	SHAFT METER DRIVE YP425 WIDE	Used with 36" 4 Row
22.	402-588D	SHAFT METER DRIVE YP625	Used with 6 Row
22.	402-614D	SHAFT METER DRIVE YP625 WIDE	Used with 36" 6 Row
22.	402-589D	SHAFT METER DRIVE YP825	Used with 8 Row
22.	402-616D	SHAFT METER DRIVE YP825 WIDE	Used with 36" 8 Row
23.	402-566D	7/8 HEX SHAFT SPACER TB X 1/2

Table of Contents Part Number Index Transmission (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

(Applies to YP425A, YP625A, YP825A only)

31713

Transmission (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg31713 806-102C	Image No. U-BOLT 3/4-10 CORNER 7 SQ
2.	402-351H	TRANS WELD W/ SPRING IDLER
3.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
4.	188-006V	BRG .880 HEX BORE 205DD
5.	805-161C	PIN ROLL 3/8 X 1 3/4 LG PLT
6.	402-654D	TRANSMISSION SHAFT
7.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
8.	808-150C	SPKT 40C23 X 7/8 HEX BORE
9.	136-113D	CHAIN RL #40 78 PITCHES	(YP425A S/N B1012N-) (YP625A S/N
9.	136-047D	CHAIN RL #40 83 PITCHES	B1057Q-) (YP825A S/N B1016S-) (YP425A S/N B1013N+) (YP625A S/N
10.	804-016C	WASHER FLAT 1/2 SAE PLT	B1058Q+) (YP825A S/N B1017S+)
11.	805-064C	PIN COTTER 7/64 X 1 LONG
12.	817-025C	NO. 40 12T IDLER SPKT.
13.	802-024C	HHCS 3/8-16X3 GR5
14.	402-352H	SPRING IDLER WELDMENT
15.	817-778C	BUSHING 1.5OD X 1.25ID X 1.0
16.	803-060C	NUT HEX JAM 5/16-18 PLT.
17.	402-568D	SHAFT TRANSMISSION - RANGE
18.	808-152C	SPKT 40C25 X 7/8 HEX BORE
19.	804-013C	WASHER LOCK SPRING 3/8 PLT
20.	803-014C	NUT HEX 3/8-16 PLT
21.	402-653D	COUPLER, SHEAR OUTPUT 3/8 PIN
22.	402-587D	SHAFT METER DRIVE YP425	Used with 4 Row
22.	402-590D	SHAFT METER DRIVE YP425 WIDE	Used with Wide 4 Row
22.	402-588D	SHAFT METER DRIVE YP625	Used with 6 Row
22.	402-614D	SHAFT METER DRIVE YP625 WIDE	Used with Wide 6 Row
22.	402-589D	SHAFT METER DRIVE YP825	Used with 8 Row
22.	402-616D	SHAFT METER DRIVE YP825 WIDE	Used with Wide 8 Row
23.	402-566D	7/8 HEX SHAFT SPACER TB X 1/2
24.	802-010C	HHCS 5/16-18X1 1/4 GR5
25.	807-301C	SPRING EXT 1.0ODX3.5LX.085MW
26.	402-355S	SPRING IDLER ASSEMBLY	Incudes items 10-14
27.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT

Dry Fertilizer Drive

(Applies to YP425A, YP625A, YP825A only)

29899

Table of Contents Part Number Index Dry Fertilizer Drive

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg29899	Image No.
1.	402-574D	TRANSFER HEX SHAFT 4-ROW	Used on 4 row
1.	402-565D	TRANSFER HEX SHAFT 6-ROW	Used on 4 row wide & 6 row
1.	402-579D	TRANSFER HEX SHAFT 8-ROW	Used on 6 row wide & 8 row
1.	402-615D	TRANSFER HEX SHAFT 8-ROW WIDE	Used on 8 row wide
2.	802-041C	HHCS 1/2-13X3 1/2 GR5
3.	817-406C	IDLER 1 PC 2.38X1.01X1.062
4.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
5.	804-017C	WASHER FLAT 1/2 USS PLT
6.	808-223C	SPKT 40C32 X 7/8 HEX BORE	Used on Single Row
6.	808-148C	SPKT 40C17 X 7/8 HEX BORE	Used on Twin Row
7.	136-059D	CHAIN RL #40 56 PITCHES
8.	808-151C	SPKT 40C24 X 7/8 HEX BORE
9.	417-531D	COUPLER, DRY FERT
10.	808-148C	SPKT 40C17 X 7/8 HEX BORE	Used on Single Row
10.	808-223C	SPKT 40C32 X 7/8 HEX BORE	Used on Twin Row
11.	804-013C	WASHER LOCK SPRING 3/8 PLT
12.	803-014C	NUT HEX 3/8-16 PLT
13.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
14.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
15.	402-350H	RANGE SPKT SUPT WELD
16.	407-308D	FERTILIZER CASE
17.	822-032C	FLANGETTE 52 MST
18.	822-119C	BRG 7/8HEXX2.05OD SPH
19.	802-282C	RHSNB 5/16-18X1 GR5
20.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
21.	136-152D	CHAIN RL #40 96 PITCHES	(YP425A S/N B1012N-) (YP625A S/N
			B1057Q-) (YP825A S/N B1016S-)
21.	136-110D	CHAIN RL #40 100 PITCHES	(YP425A S/N B1013N+) (YP625A S/N
			B1058Q+) (YP825A S/N B1017S+)
22.	808-150C	SPKT 40C23 X 7/8 HEX BORE
23.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
24.	407-384D	YP4-6-8 FERT TRANS DRIVE SHAFT
25.	817-423C	NO. 50 12T IDLER SPKT
26.	802-079C	HHCS 3/8-16X1 1/4 GR5
27.	402-126H	OFFSET DOUBLE IDLER WELDMENT
28.	808-150C	SPKT 40C23 X 7/8 HEX BORE
29.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
30.	407-569D	YP 4-6-8 FERT TRANS. SHAFT	Used with Single & Twin Row
30.	407-532D	YP425 DRY FERT TRANS SHAFT WD
30.	407-531D	YP625 DRY FERT TRANS SHAFT WD
30.	407-540D	YP825 DRY FERT TRANS SHAFT WD
31.	805-064C	PIN COTTER 7/64 X 1 LONG
32.	822-175C	FLANGETTE 52 3-BOLT PLT
33.	802-091C	HHCS 1/2-13X1 1/2 GR5
34.	407-146D	SHAFT SUPPORT FRAME BRACKET
35.	407-147D	ADJUSTABLE SHAFT SUPPORT
36.	802-092C	RHSNB 5/16-18X3/4 GR5
37.	804-015C	WASHER LOCK SPRING 1/2 PLT
38.	803-020C	NUT HEX 1/2-13 PLT
39.	804-016C	WASHER FLAT 1/2 SAE PLT
40.	804-011C	WASHER FLAT 3/8 USS PLT
41.	802-022C	HHCS 3/8-16X1 1/2 GR5

Dry Fertilizer Drive Twin Row and Wide Row

(Applies to YP425A, YP625A, YP825A only)

32178

Dry Fertilizer Drive Twin Row and Wide Row

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments		Revision
	dwg32178	Image No.
1.	136-059D	CHAIN RL #40 56 PITCHES
2.	808-148C	SPKT 40C17 X 7/8 HEX BORE
3.	817-406C	IDLER 1 PC 2.38X1.01X1.062
4.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
5.	804-017C	WASHER FLAT 1/2 USS PLT
6.	802-041C	HHCS 1/2-13X3 1/2 GR5
7.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
8.	808-223C	SPKT 40C32 X 7/8 HEX BORE
9.	402-025S	LOCK COLLAR, 7/8 HEX W/ SET SC
10.	804-015C	WASHER LOCK SPRING 1/2 PLT
11.	803-020C	NUT HEX 1/2-13 PLT
12.	803-014C	NUT HEX 3/8-16 PLT
13.	804-013C	WASHER LOCK SPRING 3/8 PLT
14.	804-011C	WASHER FLAT 3/8 USS PLT
15.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
16.	402-350H	RANGE SPKT SUPT WELD
17.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
18.	407-146D	SHAFT SUPPORT FRAME BRACKET
19.	417-531D	COUPLER, DRY FERT
20.	407-308D	FERTILIZER CASE
21.	136-110D	CHAIN RL #40 100 PITCHES
22.	822-032C	FLANGETTE 52 MST
23.	822-119C	BRG 7/8HEXX2.05OD SPH
24.	802-282C	RHSNB 5/16-18X1 GR5
25.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
26.	407-384D	YP4-6-8 FERT TRANS DRIVE SHAFT
27.	808-151C	SPKT 40C24 X 7/8 HEX BORE
28.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
29.	805-064C	PIN COTTER 7/64 X 1 LONG
30.	804-016C	WASHER FLAT 1/2 SAE PLT
31.	817-025C	NO. 40 12T IDLER SPKT.
32.	802-079C	HHCS 3/8-16X1 1/4 GR5
33.	402-126H	OFFSET DOUBLE IDLER WELDMENT
34.	402-134S	OFFSET DOUBLE IDLER ASSY, SPKT	Includes	items 29-31 & 33
35.	808-150C	SPKT 40C23 X 7/8 HEX BORE
36.	802-022C	HHCS 3/8-16X1 1/2 GR5
37.	407-531D	YP625 DRY FERT TRANS SHAFT WD	Used on	6 Row Wide Twin Row
37.	407-540D	YP825 DRY FERT TRANS SHAFT WD	Used on	8 Row Wide Twin Row
37.	407-569D	YP 4-6-8 FERT TRANS. SHAFT	Used on	4, 6 & 8 Row Twin Row
37.	407-532D	YP425 DRY FERT TRANS SHAFT WD	Used on	4 Row Wide Twin Row
38.	822-175C	FLANGETTE 52 3-BOLT PLT
39.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
40.	407-147D	ADJUSTABLE SHAFT SUPPORT
41.	802-092C	RHSNB 5/16-18X3/4 GR5
42.	802-091C	HHCS 1/2-13X1 1/2 GR5

(Applies to YP425A, YP625A, YP825A only)

38948

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg38948	Part Description Image No.	Comments Revision
1.	407-473D	GROUND DRIVE WHEEL
2.	822-240C	BRG, DUO-FACE W/SEAL LM67000LA
3.	822-020C	BRG CUP LM-67010
4.	800-001C	GREASE ZERK STRAIGHT 1/4-28
5.	407-327D	4BOLT HUB TAPPERED ROL BRG
6.	407-227S	4BOLT HUB ASY TAPPERED ROL BRG
7.	802-331C	RHSNB 1/2-13X1 3/4 GR5
8.	804-015C	WASHER LOCK SPRING 1/2 PLT
9.	803-020C	NUT HEX 1/2-13 PLT
10.	152-586D	1007 DRIVE SIDE GUARD
11.	802-034C	HHCS 1/2-13X1 1/4 GR5
12.	805-104C	PIN COTTER 3/16 X 1 1/2 PLT
13.	803-053C	NUT HEX SLOTTED 3/4-16
14.	402-313H	DRIVE SPKT 40B20 WELD 7/8 HEX
15.	402-562D	DRIVE GUARD	(YP425A S/N B1055N-) (YP625A S/N B1201Q-) (YP825A S/N B1324S-)
15.	431-281D	GROUND DRIVE CHAIN GUARD	(YP425A S/N B1056N+) (YP625A S/N B1202Q+) (YP825A S/N B1324S+)
16.	802-413C	HHCS 1/2-13X4 1/2 GR5
17.	804-017C	WASHER FLAT 1/2 USS PLT
18.	407-170D	TUBE RND 1 OD X 7/32WL X 2.25
19.	817-406C	IDLER 1 PC 2.38X1.01X1.062
20.	402-310H	GROUND DRIVE ARM WELDMENT
21.	136-051D	CHAIN RL #40 168 PITCHES
22.	803-006C	NUT HEX 1/4-20 PLT
23.	804-006C	WASHER LOCK SPRING 1/4 PLT
24.	802-004C	HHCS 1/4-20X3/4 GR5
25.	805-127C	PIN CLVS .50X1.52 USBL
26.	805-064C	PIN COTTER 7/64 X 1 LONG
27.	402-933D	7/8 HEX ID X .60
28.	808-150C	SPKT 40C23 X 7/8 HEX BORE
29.	121-166D	ADJ.YOKE END
30.	803-036C	NUT HEX JAM 1/2-13 PLT
31.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
32.	153-053D	SPRING STOP STAMPING SMALL
33.	807-159C	SPRING COMP 2 1/2ODX3/8X12 7/8
34.	812-442C	DRV WHL SPRING TRUNION CASTING
35.	802-550C	HHCS 1/2-13X10 SPTHD GR8
36.	816-306C	PLUG, SPRING ROD CASTING
37.	407-992S	GND DRIVE SPRING ASY
38.	120-269S	3 BOLT PIVOT BRG ASSY
39.	402-025S	LOCK COLLAR, 7/8 HEX W/ SET SC
40.	808-222C	SPKT 40C21 X 7/8 HEX BORE
41.	800-038C	SNAP RING INT 2.05 OD
42.	188-006V	BRG .880 HEX BORE 205DD
43.	120-188D	3 BOLT PIVOT CAST W/BRG SEAT
44.	802-082C	HHCS 1/2-13X1 3/4 GR5
45.	402-563D	DRIVE HEX SHAFT
46.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
47.	402-311H	DRIVE MOUNT BRACKET	Used on 4, 6 & 8 row
47.	402-357H	DRIVE MOUNT BRKT WIDE 3PT	Used on 8 row wide row and 10 row
48.	805-235C	PIN CLVS .50X4.77 USBL
49.	802-041C	HHCS 1/2-13X3 1/2 GR5
50.	402-349H	HUB BOLT ON GROUND DRIVE WHL
51.	804-165C	WASHER MACH 1 7/8X1 1/4X 14GA	(YP425A S/N B1055N-) (YP625A S/N B1201Q-) (YP825A S/N B1324S-)

(Applies to YP425A, YP625A, YP825A only)
Re£	Part No.	Part Description	Comments Revision
51.	402-906D	7/8 HEX SPACER WASHER .125	(YP425A S/N B1056N+) (YP625A S/N B1202Q+) (YP825A S/N B1324S+)
52.	804-061C	WASHER MACH 1.50 X 1.00 X 18GA
53.	120-310D	SPACER TUBE 1 ID X 2.25
54.	120-263D	SPACER TUBE 1 ID X 2 13/16
55.	837-171C	TUBE PLUG 1 1/2 ID

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

Sprocket Storage

(Applies to YP425A, YP625A, YP825A only)

29948

Table of Contents Part Number Index Sprocket Storage

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29948	Image No.
1.	402-021S	SPRKT STORAGE ASSY	Includes items 2-10
2.	402-022H	SPRKT STORAGE WELD
3.	808-148C	SPKT 40C17 X 7/8 HEX BORE
4.	808-155C	SPKT 40C28 X 7/8 HEX BORE
5.	808-154C	SPKT 40C27 X 7/8 HEX BORE
6.	808-153C	SPKT 40C26 X 7/8 HEX BORE
7.	808-152C	SPKT 40C25 X 7/8 HEX BORE
8.	808-151C	SPKT 40C24 X 7/8 HEX BORE
9.	808-149C	SPKT 40C19 X 7/8 HEX BORE
10.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
11.	802-022C	HHCS 3/8-16X1 1/2 GR5
12.	804-011C	WASHER FLAT 3/8 USS PLT
13.	804-013C	WASHER LOCK SPRING 3/8 PLT
14.	803-014C	NUT HEX 3/8-16 PLT
15.	808-147C	SPKT 40C15 X 7/8 HEX BORE
16.	808-156C	SPKT 40C30 X 7/8 HEX BORE
17.	808-251C	SPKT 40C36 X 7/8 HEX BORE
18.	808-276C	SPKT 40C20 X 7/8 HEX BORE
19.	808-149C	SPKT 40C19 X 7/8 HEX BORE
20.	808-249C	SPKT 40C18 X 7/8 HEX BORE
21.	402-339S	RANGE SPRKT STORAGE ASSY	Incudes items 2, 10 & 15-20

Gauge Wheel (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N

29880

Gauge Wheel (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg29880	Image No.
1.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
2.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
3.	800-001C	GREASE ZERK STRAIGHT 1/4-28
4.	402-309H	GAUGE WHEEL WELDMENT
5.	802-051C	HHCS 5/8-11X1 1/2 GR5
6.	804-022C	WASHER LOCK SPRING 5/8 PLT
7.	402-576D	PIN, GAUGE WHEEL PIVOT
8.	805-255C	PIN ROLL 3/8 X 2 1/2 PLT
9.	402-308H	NARROW WHEEL ARM WELDMENT
10.	802-065C	HHCS 3/4-10X2 1/4 GR5
11.	804-023C	WASHER LOCK SPRING 3/4 PLT
12.	402-321S	HUB & SPINDLE ASSEMBLY
13.	814-384C	TIRE 8R19.5LT
14.	814-386C	WHEEL 19.5-6
14.	814-560C	WHEEL 19.5-6 BUCKSKIN
15.	814-210C	VALVE STEM METAL TR-575 TUBLES
16.	814-385C	TIRE & WHL ASY 8R19.5LT

16.	814-518C	TIRE & WHL ASY 8R19.5LT BKSN
17.	402-094D	CYL MOUNT PLATE, GAUGE WHEEL
18.	810-304C	CYL REP 3.5X8X1.75 ROD (WLD)
18.	810-305C	CYL REP 3.0X8X1.50 ROD (WLD)
18.	810-306C	CYL 2.5X8X1.50 ROD (WLD)
19.	805-127C	PIN CLEVIS 1/2 X 1 3/4
20.	805-143C	PIN HAIR COTTER .120 PLT
21.	402-229H	TRANSPORT LOCK
22.	402-130D	CYL PIN
23.	805-021C	PIN COTTER 1/4 X 2 PLT
24.	804-029C	WASHER FLAT 1 SAE
25.	800-290C	SNAP RING EXT 1 1/2 HEAVY
26.	848-048C	DECAL CAUTION TIRE PSI 110/240

Refer to Hub Assembly (402-321S) for breakdown

(YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/NB1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+)

Includes items 13-15 (YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/NB1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+)

Refer to Energy Hydraulic Cylinder (810-304C) for breakdown Refer to Energy Hydraulic Cylinder (810-305C) for breakdown Refer to Energy Hydraulic Cylinder (810-306C) for breakdown

(Applies to YP425A, YP625A, YP825A only)

32814

Gauge Wheel (YP425A S/N B1009N - B1019N) (YP625A S/N B1044Q - B1096Q) (YP825A S/N B1015S - B1040S)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg32814 806-102C	Image No. U-BOLT 3/4-10 CORNER 7 SQ
2.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
3.	800-001C	GREASE ZERK STRAIGHT 1/4-28
4.	402-309H	GAUGE WHEEL WELDMENT
5.	802-051C	HHCS 5/8-11X1 1/2 GR5
6.	804-022C	WASHER LOCK SPRING 5/8 PLT
7.	402-576D	PIN, GAUGE WHEEL PIVOT
8.	805-255C	PIN ROLL 3/8 X 2 1/2 PLT
9.	402-348H	NARROW WHEEL ARM WELDMENT
10.	802-065C	HHCS 3/4-10X2 1/4 GR5
11.	804-023C	WASHER LOCK SPRING 3/4 PLT
12.	402-321S	HUB & SPINDLE ASSEMBLY
13.	814-384C	TIRE 8R19.5LT
14.	814-386C	WHEEL 19.5-6
14.	814-560C	WHEEL 19.5-6 BUCKSKIN
15.	814-210C	VALVE STEM METAL TR-575 TUBLES
16.	814-385C	TIRE & WHL ASY 8R19.5LT

16.	814-518C	TIRE & WHL ASY 8R19.5LT BKSN
17.	402-276D	CYL MOUNT PLATE, GUAGE WHEEL
18.	810-822C	CYL REP 3.5X8X1.75 ROD (TRUN)
18.	810-823C	CYL REP 3.0X8X1.50 ROD (TRUN)
18.	810-824C	CYL 2.5X8X1.50 ROD (TRUN)
19.	800-290C	SNAP RING EXT 1 1/2 HEAVY
20.	848-708C	DECAL CAUTION TIRE PSI 110/120
21.	402-347H	TRANSPORT LOCK TIE ROD CYL
22.	402-641D	CYL PIN, LIFT WHEEL MOUNT
23.	805-021C	PIN COTTER 1/4 X 2 PLT
24.	804-029C	WASHER FLAT 1 SAE
25.	838-362C	DECAL PIC--TIRE IS NOT A STEP
26.	194-402D	PLASTIC CYL LOCK BUMPER
27.	194-401D	LOCK SPRING CLIP
28.	802-283C	HHCS 1/4-20X1/2 GR2
29.	803-027C	NUT HEX 3/4-10 PLT
30.	402-371H	TOP MOUNT WELDMENT
31.	802-697C	HHCS 3/4-10X4 1/4 SPTHD GR 8
32.	804-025C	WASHER FLAT 3/4 SAE PLT

(YP425A S/N B1014N-) (YP625A S/N B1061Q-) (YP825A S/N B1027S-)

Refer to Hub Assembly (402-321S) for breakdown (YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/N B1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+)

Includes items 13-15 (YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/N B1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+) (YP425A S/N B1015N+) (YP625A S/N B1062Q+) (YP825A S/N B1028S+)

Gauge Wheel (YP425A S/N B1020N+) (YP625A S/N B1097Q+) (YP825A S/N

68462

Gauge Wheel (YP425A S/N B1020N+) (YP625A S/N B1097Q+) (YP825A S/N B1041S+)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Revision

Comments

1.	dwg68462 402-409H	Image No. WHEEL ARM WELD 11L15
2.	402-309H	GAUGE WHEEL WELDMENT
3.	402-371H	TOP MOUNT WELDMENT
4.	402-231D	PIN, WHL MODULE PIVOT PT
5.	805-255C	PIN ROLL 3/8 X 2 1/2 PLT
6.	804-063C	WASHER MACH 2.25 X 1.50 X 10GA
7.	800-290C	SNAP RING EXT 1 1/2 HEAVY
8.	802-697C	HHCS 3/4-10X4 1/4 SPTHD GR8
9.	804-025C	WASHER FLAT 3/4 SAE PLT
10.	804-023C	WASHER LOCK SPRING 3/4 PLT
11.	803-027C	NUT HEX 3/4-10 PLT
12.	800-001C	GREASE ZERK STRAIGHT 1/4-28
13.	802-051C	HHCS 5/8-11X1 1/2 GR5
14.	804-022C	WASHER LOCK SPRING 5/8 PLT
15.	402-276D	CYL MOUNT PLATE, GUAGE WHEEL
16.	802-065C	HHCS 3/4-10X2 1/4 GR5
17.	402-410S	HUB & SPINDLE ASSEMBLY	See Hub Assembly (402-410S) for
18.	814-502C	TIRE/WHL 11LX15LOAD F 8BLT BKS	breakdown. Includes 19 - 21.
19.	814-266C	TIRE 24X7.7-10
20.	814-503C	WHEEL 15X8 8 BOLT BUCKSKIN
21.	816-035C	VALVE STEM TR415X.625X1 1/4 LG
22.	838-595C	DECAL CAUTION TIRE 90 PSI/120
23.	810-822C	CYL REP 3.5X8X1.75 ROD (TRUN)
23.	810-823C	CYL REP 3.0X8X1.50 ROD (TRUN)
23.	810-824C	CYL 2.5X8X1.50 ROD (TRUN)
24.	402-347H	TRANSPORT LOCK TIE ROD CYL
25.	402-641D	CYL PIN, LIFT WHEEL MOUNT
26.	805-021C	PIN COTTER 1/4 X 2 PLT
27.	804-029C	WASHER FLAT 1 SAE
28.	838-362C	DECAL PIC--TIRE IS NOT A STEP
29.	194-402D	PLASTIC CYL LOCK BUMPER
30.	194-401D	LOCK SPRING CLIP
31.	802-283C	HHCS 1/4-20X1/2 GR2

Hub Assembly (402-321S) (YP425A S/N B1019N-) (YP625A S/N B1096Q-) (YP825A S/N B1040S-)

(Applies to YP425A, YP625A, YP825A only)

29883

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg29883 822-240C	Image No. BRG, DUO-FACE W/SEAL LM67000LA
2.	822-020C	BRG CUP LM-67010
3.	803-219C	NUT LUG 5/8-18 X 90 DEG PLT
4.	800-001C	GREASE ZERK STRAIGHT 1/4-28
5.	802-182C	HUB STUD 5/8-18X2 1/2 GR5
6.	822-168C	BRG CUP 3.06OD LM603011
7.	822-169C	BRG CONE 1.78ID LM603049
8.	815-228C	HUB 8-BOLT(45-8) ASY
9.	402-580D	DRIVE SPINDLE YP 4-6-8
10.	816-529C	HUB SEAL Q458 (TCM 223063TB-H)
11.	402-607D	SEAL KEEPER WASHER
12.	803-383C	NUT HEX JAM 1 1/4-12 PLT
13.	402-321S	HUB & SPINDLE ASSEMBLY

Includes items 1-7

Includes Items 1-12

Hub Assembly (402-410S) (YP425A S/N B1020N+) (YP625A S/N B1097Q+)

68463

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg68463 402-662D	Image No. DRIVE SPINDLE YP 4-6-8 11L15
2.	816-529C	HUB SEAL Q458 (TCM 223063TB-H)
3.	815-228C	HUB 8-BOLT(45-8) ASY
4.	822-240C	BRG, DUO-FACE W/SEAL LM67000LA
5.	402-607D	SEAL KEEPER WASHER
6.	402-663D	DRIVE SPINDLE SPACER
7.	822-240C	BRG, DUO-FACE W/SEAL LM67000LA
8.	803-219C	NUT LUG 5/8-18 X 90 DEG PLT

Includes studs and nuts.

(Applies to YP425A, YP625A, YP825A only)

36902

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg36902	Image No.
1.	403-774H	AIR METER 25 SER 4-6-8YP
2.	403-608V	SHAFT AND DISK SEAT ASSY
3.	403-278H	IDLER WELDM
4.	403-284S	COVER ASSY, AIR METER
5.	403-441D	HOUSING, MACHINED, AIR METER
6.	891-192C	IDLER PIVOT 1.73 LONG
7.	403-483D	PLATE, SHUTTER
8.	403-484D	HANDLE, SHUTTER
9.	802-007C	HHCS 5/16-18X3/4 GR5
10.	800-046C	WOODRUFF KEY #606
11.	800-085C	SNAP RING EXT 1 HEAVY
12.	801-155C	HFS 10-24 X 3/4 PLT
13.	802-014C	HHCS 3/8-16X3/4 GR5
14.	802-078C	HHCS 1/4-20X5/8 GR5
15.	802-159C	HHCS 5/16-18X1 GR5
16.	802-705C	HHCS 5/16-18X5/8 GR5
17.	803-268C	NUT HEX NYLOCK 10-24 PLT
18.	803-302C	NUT HEX JAM NYLOCK 5/8-18 PLT
19.	804-007C	WASHER FLAT 1/4 SAE PLT
20.	804-010C	WASHER FLAT 5/16 USS PLT
21.	804-013C	WASHER LOCK SPRING 3/8 PLT
22.	403-596A	VOLUMETRIC METER GRAIN SHIELD
23.	804-168C	WASHER FENDER 5/16 X 1 1/2
24.	403-614D	WASHER FLAT 5/8 14GA KEYHOLE
25.	804-227C	WASHER WAVE SPRG 1.31ID 1.63OD
26.	804-228C	WASHER WAVE SPRG 0.65ID 0.79OD
27.	807-187C	SPRING COMP 1.46ODX1.5X.112W
28.	807-236C	SPRING EXT. 1.0ODX5.OLX.095MW
29.	807-284C	SPRING COMP 0.72OD .095W 1.25L
30.	808-277C	SPKT 41B19 X 5/8 BORE W/KYWAY
31.	817-846C	IDLER SPOOL 2.38X1.01X0.90
32.	817-772C	AIR MTR BRUSH HOLDER SNAP
33.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)
34.	817-774C	AIR MTR AIR INLET ELBOW
35.	817-776C	AIR MTR DISK CLAMP
36.	817-777C	BUSHING .63 ID X.75 OD X.75 L
37.	837-059C	AIR METER SEED INLET ELBOW
37.	837-092C	SEED INLET ELBOW
38.	817-789C	BRUSH, SEED DROP
39.	817-801C	BRUSH,4 TUFTED
40.	817-803C	AM BRUSH HOLDER
41.	817-826C	CLAMP HOSE NYLON GF MATRIX 192
41.	800-480C	CLAMP HOSE NYLON
42.	817-829C	PLUG, FLUSH HEAD POLYETH 7/16
43.	822-227C	BRG 0.625ID X1.375OD X0.43
44.	803-043C	NUT HEX WHIZ 5/16-18 PLT
45.	891-204C	SHAFT, SHUTTER, 3/8 SQ
46.	891-118C	BRUSH, STRIP, LONG
47.	891-119C	BRUSH, STRIP, SHORT
48.	800-406C	NYLON HOSE CLAMP 1 7/8 - 2 1/8
49.	817-824C	EDGE SEAL 3/32 X 7/16X.24.25L
50.	817-822C	AIR MTR RAIN COVER
51.	817-823C	LATCH, FLEXIBLE SNAP
52.	800-118C	SNAP RING EXT 5/8 .050 T
53.	817-841C	DISK AIR METER BLANK
54.	817-794C	DISK CORN RND LARGE 24 CELL
54.	817-795C	DISK CORN RND SMALL 24 CELL

(S/N-)

Shown. (S/N+)

(S/N C1089S-)

Shown. (S/N C1090S+)

(Applies to YP425A, YP625A, YP825A only) rel Part No. Part Description '
54.	817-796C	DISK CORN RND LARGE 40 CELL
54.	817-797C	DISK CORN RND SMALL 40 CELL
54.	817-798C	DISK SOYB 84 CELL
54.	817-800C	DSK MILO&PELLET SUGRBT130 CELL
54.	817-836C	DISK CORN FLAT LARGE 24 CELL
54.	817-838C	DISK CORN FLAT LARGE 40 CELL
54.	817-849C	DSK MILO&PELLET SUGRBT 65 CELL
54.	403-551D	DISK SOYB 168 CELL
54.	817-867C	DISK VOLUMETRIC NO. 1 84 CELL
54.	837-126C	DISK CORN RND MED 24 CELL
54.	837-127C	DISK CORN RND MED 40 CELL
54.	837-148C	DISK CANOLA 150 CELL
54.	817-991C	DISK CANOLA 250 CELL
54.	837-186C	DISK HILL DROP COTTON 12 CELL
54.	817-851C	DSK POPCORN SNFLWR OIL LG 24CL
54.	817-857C	DISK COTTON 60 CELL
54.	837-057C	DSK MILO&PELLET SUGBT 30 CELL
54.	837-364C	DISK IND HEMP 5 CELL
54.	817-967C	DISK EDIBLE BEAN LARGE 56 CELL
54.	837-065C	DISK EDIBLE BEAN MED 60 CELL
54.	837-386C	DISK IND HEMP 30 CELL
54.	837-234C	DISK SUNFLOWER SML 60 CELL
54.	837-235C	DISK SUNFLOWER MED 60 CELL
55.	204-241D	FERTILIZER TINE SPACER
56.	403-726D	BRACKET, CLEANOUT FUNNEL
57.	403-727D	BRACKET, CLEANOUT FUNNEL LATCH
58.	802-044C	HHCS 1/2-13X4 GR5
59.	802-388C	HFS 3/8-16X1 GR5
60.	803-147C	NUT HEX NYLOCK 1/2-13
61.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
62.	804-016C	WASHER FLAT 1/2 SAE PLT
63.	807-256C	SPRING EXT .438ODX1.5X.046W
64.	816-429C	WASHER RBR 1 3/8ODX9/16IDX1/2L
65.	817-123C	HANDLE GRIP .187 X .750 X 3 LG
66.	817-811C	FUNNEL, AIR METER CLEAN OUT
67.	403-527S	CLEANOUT FUNNEL & STORAGE BKT
68.	403-509A	AIR METER SHUTTER AND SQ SHAFT
69.	891-122C	AD 7/16MORB X 1/4HB
70.	803-374C	NUT HEX JAM 7/16-20 PLT

Comments

Revision

25 Series Air Meter Assembly (YP425A S/N B1047N+) (YP625A S/N B1198Q+) (YP825A S/N B1291S+) (continued)

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

(Applies to YP425A, YP625A, YP825A only)

29901

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg29901 403-464H	Image No. AIR METER MOUNT 25 SER 4-6-8YP
2.	403-608V	SHAFT AND DISK SEAT ASSY
3.	403-278H	IDLER WELDM
4.	403-284S	COVER ASSY, AIR METER	Includes items 49-51
5.	403-441D	HOUSING, MACHINED, AIR METER
6.	891-192C	IDLER PIVOT 1.73 LONG
7.	403-483D	PLATE, SHUTTER	Must have Rev. A to work with item 45.
8.	403-484D	HANDLE, SHUTTER
9.	802-007C	HHCS 5/16-18X3/4 GR5
10.	800-046C	WOODRUFF KEY #606
11.	800-085C	SNAP RING EXT 1 HEAVY
12.	801-155C	HFS 10-24 X 3/4 PLT
13.	802-014C	HHCS 3/8-16X3/4 GR5
14.	802-078C	HHCS 1/4-20X5/8 GR5
15.	802-159C	HHCS 5/16-18X1 GR5
16.	802-705C	HHCS 5/16-18X5/8
17.	803-268C	NUT HEX NYLOCK 10-24 PLT
18.	803-302C	NUT HEX JAM NYLOCK 5/8-18 PLT
19.	804-007C	WASHER FLAT 1/4 SAE PLT
20.	804-010C	WASHER FLAT 5/16 USS PLT
21.	804-013C	WASHER LOCK SPRING 3/8 PLT
22.	891-121C	GASKET, OVAL, SEED IN
23.	804-168C	WASHER FENDER 5/16 X 1 1/2
24.	403-614D	WASHER FLAT 5/8 14GA KEYHOLE
25.	804-227C	WASHER WAVE SPRG 1.31ID 1.63OD
26.	804-228C	WASHER WAVE SPRG 0.65ID 0.79OD
27.	807-187C	SPRING COMP 1.46ODX1.5X.112W
28.	807-236C	SPRING EXT. 1.0ODX5.OLX.095MW
29.	807-284C	SPRING COMP 0.72OD .095W 1.25L
30.	808-277C	SPKT 41B19 X 5/8 BORE W/KYWAY
31.	817-846C	IDLER SPOOL 2.38X1.01X0.90
32.	817-772C	AIR MTR BRUSH HOLDER SNAP
33.	800-398C	NYLON HOSE CLAMP 1 11/16-
34.	817-774C	AIR MTR AIR INLET ELBOW
35.	817-776C	AIR MTR DISK CLAMP
36.	817-777C	BUSHING .63 ID X.75 OD X.75 L
37.	817-862C	AIR MTR SEED INLET ELBOW
38.	817-789C	BRUSH, SEED DROP
39.	817-801C	BRUSH,4 TUFTED
40.	817-803C	AM BRUSH HOLDER
41.	800-241C	CLAMP WRM DRV #48SS (1.63-3.5)
42.	817-829C	PLUG, FLUSH HEAD POLYETH 7/16
43.	822-227C	BRG 0.625ID X1.375OD X0.43
44.	803-043C	NUT HEX WHIZ 5/16-18 PLT
45.	891-204C	SHAFT, SHUTTER, 3/8 SQ	Only works with item 7 with Rev.A
46.	891-118C	BRUSH, STRIP, LONG
47.	891-119C	BRUSH, STRIP, SHORT
48.	891-120C	GASKET, OVAL, AIR IN
49.	817-824C	EDGE SEAL 3/32 X 7/16X.24.25L
50.	817-822C	AIR MTR RAIN COVER
51.	817-823C	LATCH, FLEXIBLE SNAP
52.	800-118C	SNAP RING EXT 5/8 .050 T
53.	817-841C	DISK AIR METER BLANK
54.	817-794C	DISK CORN RND LARGE 24 CELL	Shown.
54.	817-795C	DISK CORN RND SMALL 24 CELL
54.	817-796C	DISK CORN RND LARGE 40 CELL
54.	817-797C	DISK CORN RND SMALL 40 CELL

(Applies to YP425A, YP625A, YP825A only) rel Part No. Part Description
54.	817-798C	DISK SOYB 84 CELL
54.	817-800C	DISK MILO 130 CELL
54.	817-836C	DISK CORN FLAT LARGE 24 CELL
54.	817-838C	DISK CORN FLAT LARGE 40 CELL
54.	817-849C	DISK MILO 65 CELL
54.	403-551D	DISK SOYB 168 CELL
54.	817-867C	DISK VOLUMETRIC NO. 1 84 CELL
54.	837-126C	DISK CORN RND MED 24 CELL
54.	837-127C	DISK CORN RND MED 40 CELL
54.	837-148C	DISK CANOLA 150 CELL
54.	817-991C	DISK CANOLA 250 CELL
54.	837-234C	DISK SUNFLOWER SML 60 CELL
54.	837-235C	DISK SUNFLOWER MED 60 CELL
54.	817-851C	DSK POPCORN SNFLWR OIL LG 24CL
54.	837-057C	DSK MILO&PELLET SUGBT 30 CELL
54.	837-186C	DISK HILL DROP COTTON 12 CELL
54.	837-386C	DISK IND HEMP 30 CELL
54.	837-065C	DISK EDIBLE BEAN MED 60 CELL
54.	817-967C	DISK EDIBLE BEAN LARGE 56 CELL
54.	817-857C	DISK COTTON 60 CELL
55.	204-241D	FERTILIZER TINE SPACER
56.	403-726D	BRACKET, CLEANOUT FUNNEL
57.	403-727D	BRACKET, CLEANOUT FUNNEL LATCH
58.	802-044C	HHCS 1/2-13X4 GR5
59.	802-388C	HFS 3/8-16X1 GR5
60.	803-147C	NUT HEX NYLOCK 1/2-13
61.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
62.	804-016C	WASHER FLAT 1/2 SAE PLT
63.	807-256C	SPRING EXT .438ODX1.5X.046W
64.	816-429C	WASHER RBR 1 3/8ODX9/16IDX1/2L
65.	817-123C	HANDLE GRIP .187 X .750 X 3 LG
66.	817-811C	AIR METER CLEAN OUT FUNNEL
67.	403-527S	CLEANOUT FUNNEL & STORAGE BKT
68.	403-509A	AIR METER SHUTTER AND SQ SHAFT
69.	891-122C	AD 7/16MORB X 1/4HB BRASS
70.	803-374C	NUT HEX JAM 7/16-20 PLT
71.	800-406C	NYLON HOSE CLAMP 1 7/8 - 2 1/8
72.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)
73.	403-596A	VOLUMETRIC METER GRAIN SHIELD

Comments

Revision

Includes items 55-66.

Includes Rev.A shutter plate. Will take place of item 42.

Will take place of item 42. Used As a Brace.

Used with Air Hose.

Option used with small seeds.

25 Series Air Meter Assembly (YP425A S/N B1046N-) (YP625A S/N B1197Q-) (YP825A S/N B1290S-) (continued)

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

(Applies to YP425A, YP625A, YP825A only)

29979

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg29979	Part Description Image No.	Comments Revision
1.	298-886H	25P MIDDLE OPENER MOUNT WELDMT
2.	298-885H	25P REAR OPENER MOUNT WELDMT
3.	806-052C	U-BOLT 5/8-11 X 7 1/32 X 8 1/2
4.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
5.	298-884H	25P FRONT OPENER MOUNT WELDMT
6.	804-022C	WASHER LOCK SPRING 5/8 PLT
7.	803-021C	NUT HEX 5/8-11 PLT
8.	817-084C	PARALLEL ARM PIVOT BUSHING
9.	198-240D	3 13/32 SPRING STRAP
10.	288-374H	25 SERIES UPPER PARALLEL ARM	Shown (S/N B1009N+) (S/N B1044Q+) (S/N B1015S+)
10.	298-513H	25 SERIES UPPER PARALLEL ARM	(S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)
11.	805-435C	PIN HITCH 5/8 X 5 3/4 USABLE
12.	198-295D	25P REAR OPENER INNER PIVOT TB
13.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
14.	198-257D	IDLER SPACER TUBE 1/2OD X 1.56
15.	817-480C	IDLER SPOOL 1.44OD X.53B X1.5L
16.	817-787C	AM SEED TUBE DIRT GASKET
17.	802-745C	HFS 1/2-13X6 1/8GR5 PLT
18.	802-014C	HHCS 3/8-16X3/4 GR5
19.	804-013C	WASHER LOCK SPRING 3/8 PLT
20.	804-012C	WASHER FLAT 3/8 SAE PLT
21.	802-114C	HHCS 3/8-16X2 1/2 GR5
22.	298-509H	25 SERIES OPENER SHANK WELDMT
23.	807-076C	SPRING EXT 1.575 OD X .225 W
24.	803-014C	NUT HEX 3/8-16 PLT
25.	403-667D	25 SRS LOWER PARALLEL ARM	Shown (S/N B1009N+) (S/N B1044Q+) (S/N B1015S+)
25.	298-510H	25 SERIES LOWER PARALLEL ARM	(S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)
26.	808-395C	SPKT 41C12 W/SS SPCL PLT
27.	136-263D	CHAIN RL #41 148 PITCHES	Used with Rear Opener Mount
27.	136-264D	CHAIN RL #41 120 PITCHES	Used with Middle Opener Mount
27.	136-265D	CHAIN RL #41 94 PITCHES	Used with Front Opener Mout
28.	822-239C	PEER 7/8 HEX BRG AND MNT
29.	802-017C	HHCS 3/8-16X1 GR5
30.	802-260C	HHCS 1/2-13X7 GR5
31.	804-012C	WASHER FLAT 3/8 SAE PLT
32.	198-334D	TWIN ROW SPACER BRACKET LOWER
33.	198-335D	TWIN ROW SPACER BRACKET UPPER
34.	802-015C	RHSNB 3/8-16X1 GR5

Opener Body

(Applies to YP425A, YP625A, YP825A only)

29707

Opener Body

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg29707	Image No.
1.	800-112C	CABLE TIE .19X7.25 1.75D 50LB
2.	800-118C	SNAP RING EXT 5/8 .050 T
3.	198-202D	20 SER OPNR CAM PIN
4.	802-092C	RHSNB 5/16-18X3/4 GR5
5.	404-152D	SCRAPER, DISC RH
6.	805-063C	PIN COTTER 3/32 X 1 LONG
7.	805-278C	PIN CLEVIS 1/4 X 2 1/2 PLT
8.	404-020D	PLANTER HANDLE
9.	404-014S	ADJUSTMENT ASSY	Includes items 26-33
10.	199-141H	25P MID PW MOUNT
10.	199-109H	RPBY 199-147A
11.	816-302C	SEED FLAP, RUBBER, SEED-LOK
12.	817-349C	SEED FLAP, UHMW, LONG
13.	403-301S	SEED TUBE AM TB,CLIP & SENSOR	Includes items 14-16
14.	843-191C	DJ STYLE WIDE SEED SENSOR
15.	817-827C	SEED TUBE AIRMETER 25 SER
16.	198-331D	SEED TUBE 25S HOOK CLIP
17.	801-164C	SCRW SET SQ HD 1/2-13X1 3/4GR5
18.	198-288D	25P SIDE DEPTH WHL ARM SPINDLE
18.	404-119D	SPINDLE, GA WHL MNT ADJ
19.	803-043C	NUT HEX WHIZ 5/16-18 PLT
20.	404-153D	SCRAPER, DISC LH
21.	830-424C	ELBOW PTC 1/4 X 3/8
22.	805-250C	PIN ROLL 5/16 X 7/8
23.	805-335C	PIN ROLL 5/16 X 5/8 PLT
24.	404-796H	25P SCRAPER SEP WLDMT 3/8 FRT
25.	404-198D	DISK SHIELD
26.	807-119C	SPRING COMP .72 X 1.5 X .072WD
27.	804-100C	WASHER 3/4 X 17/32 X 18 GA PLT
28.	805-063C	PIN COTTER 3/32 X 1 LONG
29.	404-078D	WALKBEAM MOUNT
30.	404-079D	WALKBEAM PIVOT PIN
31.	404-077D	WALKBEAM
32.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
33.	805-290C	PIN ROLL 5/32 X 1 1/2 PLT
34.	404-155D	ARM, GAUGE WHEEL
34.	198-289D	25P SIDE DEPTH WHEEL ARM
35.	800-001C	GREASE ZERK STRAIGHT 1/4-28
36.	802-039C	HHCS 1/2-13X3 GR5
37.	804-015C	WASHER LOCK SPRING 1/2 PLT
38.	803-020C	NUT HEX 1/2-13 PLT
39.	298-882S	25P NARROW ELIMINATOR BUSH ASY	Includes items 40-42 Used with 2 1/2"
			and 3" Wide Tires
39.	298-881S	25P WIDE ELIMINATOR BUSHNG ASY	Includes items 40-42 Used with 4"
			Wide Tires
40.	816-368C	O-RING SQ 1 1/4ID X1 1/2ODX1/8
41.	198-291D	25P DEPTH WHL OUTER BUSHING
41.	404-171D	O-RING BUSHING
42.	198-290D	25P DEPTH WHL ECCENTRIC BUSHNG
42.	404-174D	ECCENTRIC BUSHING
43.	812-327C	25P ECCENTRIC HEX ADJUSTER
44.	802-663C	HFS 1/2-13 X 1 1/2 GR8 NYL PLT
45.	804-040C	WASHER MACH 1.19 X .63 X 18GA
46.	804-195C	WASHER FLAT 1.31ODX.65IDX.188T
47.	814-257C	2.5X16 SIDE DEPTH WHEEL ASSY
47.	814-260C	3X16 SIDE DEPTH WHEEL ASSY
47.	814-173C	4 X 16 GAUGE TIRE ASSY-PLASTIC

(Applies to YP425A, YP625A, YP825A only)

Re£	Part No.	Part Description	Comments	Revision
48.	842-193C	HSBHCS 5/8-11X3 GR5
49.	404-121S	4.0 MM 15 DISC W/ 5/8 ASSY	Includes items 50-53
50.	188-001V	BRG AA205DD
51.	820-287C	4.0 MM 15 DISK (21 DEG BEVEL)
52.	890-466C	HSG RIBB FLG 6BOLT PLT
53.	800-213C	RIVET,BUTTON HEAD 1/4 X 1/2
54.	107-111D	DD BRG FLANGE DUST COVER
55.	802-228C	HHCS 5/8-11X1 1/2 GR5 NYL
56.	804-022C	WASHER LOCK SPRING 5/8 PLT
57.	802-091C	HHCS 1/2-13X1 1/2 GR5
58.	802-258C	HHCS 1/2-13X1 GR5
59.	405-032D	1X12 PWADJUSTER
60.	199-140H	LONG PQ MOUNT
60.	199-108H	RPBY 199-146A
61.	800-244C	CABLE TIE .19X15 PANDU BT4S-CO
62.	802-106C	RHSNB 1/2-13X1 1/2 GR5
63.	404-255D	TOP COVER
64.	404-254D	COVER

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg29935	Image No.
1.	817-264C	96 CHEMICAL HOPPER LID
2.	817-269C	96 HOPPER LID HOOK
3.	800-283C	PUSH NUT 1/4
4.	803-230C	NUT HEX FLANGE 1/4-20 PLT
5.	817-268C	96 CHEMICAL HOPPER
6.	403-467H	SEED HOPPER DSCHRG WELD REAR	Shown Used with Rear
6.	403-468H	SEED HOPPER DSCHRG WELD FRONT	Used with front
7.	802-283C	HHCS 1/4-20X1/2 GR2
8.	403-429D	SLIDE GATE
9.	804-006C	WASHER LOCK SPRING 1/4 PLT
10.	803-006C	NUT HEX 1/4-20 PLT
11.	800-203C	CLAMP WRM DRV #32SS (1.56-2.5)
12.	990-253R	HOSE 2 ID POLYP HELIX
13.	403-466K	REAR SEED HOPPER ASSY YP4-6-8	Includes items 1-12
13.	403-465K	FRONT SEED HOPPER ASSY YP4-6-8	Includes items 1-12
14.	802-017C	HHCS 3/8-16X1 GR5
15.	403-469H	SEED HOPPER SUPPORT WELDMENT
16.	800-137C	OVER CENTER LATCH
17.	802-002C	RHSNB 1/4-20X3/4 GR5
18.	803-230C	NUT HEX FLANGE 1/4-20 PLT
19.	804-013C	WASHER LOCK SPRING 3/8 PLT
20.	803-014C	NUT HEX 3/8-16 PLT
21.	403-682D	REAR HOPPER SUPPORT RH	Used with Rear Opener
21.	403-683D	FRONT HOPPER SUPT RH	Used with Front Opener
22.	403-681D	REAR HOPPER SUPPORT LH	Used with Rear Opener
22.	403-680D	FRONT HOPPER SUPT LH	Used with Front Opener
23.	403-685D	REAR HOPPER BRACE RH	Used with Rear Opener
23.	403-686D	FRONT HOPPER BRACE RH	Used with Front Opener
24.	403-684D	REAR HOPPER BRACE LH	Used with Rear Opener
24.	403-687D	FRONT HOPPER BRACE LH AIR	Used with Front Opener
25.	802-060C	HHCS 5/8-11X4 GR5
26.	804-021C	WASHER FLAT 5/8 SAE PLT
27.	804-022C	WASHER LOCK SPRING 5/8 PLT
28.	803-021C	NUT HEX 5/8-11 PLT
29.	802-906C	HFS 1/2-13X6 5/8 GR5 PLT
30.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
31.	821-069C	EZEE-GLIDE PLUS LUBRICANT-5GAL
32.	502-060D	DUST PLUG CHAIN 10
33.	805-031C	PIN HAIR COTTER .092 WIRE
34.	800-051C	RING, SPLIT 1-1/4 I.D.
35.	403-739D	HOPPER STIFFENER

(Applies to YP425A, YP625A, YP825A only)

32156

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg32156 403-595K	Image No. HOPPER ASSEMBLY LH	Includes items 2-10
2.	817-896C	PLANTER HOPPER LID 1.6 BU
3.	800-413C	NUT JACKNUT 1/4-20
4.	807-304C	1.6 BU HOPPER LID SPRING CLIP
5.	804-075C	WASHER FLAT 1/4 USS PLT
6.	804-006C	WASHER LOCK SPRING 1/4 PLT
7.	802-257C	HFSS 1/4-20X3/4 GR5
8.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
9.	817-894C	PLANTER HOPPER 1.6 BU LH
10.	802-092C	RHSNB 5/16-18X3/4 GR5
11.	403-594K	HOPPER ASSEMBLY RH	Includes items 24 & 25
12.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
13.	802-017C	HHCS 3/8-16X1 GR5
14.	804-013C	WASHER LOCK SPRING 3/8 PLT
15.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
16.	817-480C	IDLER SPOOL 1.44OD X.53B X1.5L	Used with Middle and Rear Openers
16.	198-333D	1 1/4 LONG PLASTIC CHAIN IDLER	Used with Front Opener
17.	198-257D	IDLER SPACER TUBE 1/2OD X 1.56
18.	803-014C	NUT HEX 3/8-16 PLT
19.	802-114C	HHCS 3/8-16X2 1/2 GR5
20.	802-323C	HHCS 1/2-13X6 1/2 GR5
21.	403-564H	LH HOPPER MOUNT WLDMNT
22.	403-565H	RH HOPPER MOUNT WLDMNT
23.	821-069C	EZEE-GLIDE PLUS LUBRICANT-5GAL
24.	817-895C	PLANTER HOPPER 1.6 BU RH
25.	403-593V	LID AND SPRING ASY	Includes items: 2-7
26.	804-010C	WASHER FLAT 5/16 USS PLT
27.	816-793C	DRAW LATCH, RUBBER 4 9/16
28.	816-831C	LID SEAL, HOPPER
29.	403-852D	HOPPER LID MOUNT PLATE

(Applies to YP425A, YP625A, YP825A only)

36927

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg36927	Image No.
1.	802-626C	HHCS 1/4-20X8 GR5 PLT
2.	804-007C	WASHER FLAT 1/4 SAE PLT
3.	803-293C	NUT HEX FLG TL 1/4-20 ZNYCR
4.	837-071C	HOPPER LID 1.6 BU HINGED
5.	403-934D	LID SPRING MOUNT
6.	802-301C	HHCS 1/4-20X1/2 GR5
7.	803-230C	NUT HEX FLANGE 1/4-20 PLT
8.	807-356C	DOUBLE TORSION SPRING
9.	837-077C	HOPPER LATCH HANDLE
10.	802-633C	RHSNB 1/4-20X5/8 PLT
11.	816-845C	BULB SEAL 1.6 BU HINGED LID
12.	403-759S	LID ASY 1.6 BU HINGED	Includes items 4-11.
13.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
14.	403-943D	SPRING MOUNT
15.	807-355C	GAS SPRING 22.5LB 6.3" STROKE
16.	821-069C	EEZEE-GLIDE PLUS LUBRICANT-5GAL
17.	837-072C	HOPPER 1.6 BU LH	LH. Shown.
17.	837-073C	HOPPER 1.6 BU RH	RH.
18.	802-159C	HHCS 5/16-18X1 GR5
19.	804-010C	WASHER FLAT 5/16 USS PLT
20.	837-083C	LID LATCH CATCH
21.	802-092C	RHSNB 5/16-18X3/4 GR5
22.	403-958K	HOPPER ASSEMBLY LH	LH. Shown Includes items 13-21.
22.	403-959K	HOPPER ASSEMBLY RH	RH
23.	403-564H	LH HOPPER MOUNT WLDMNT	LH. Shown.
23.	403-565H	RH HOPPER MOUNT WLDMNT	RH.
24.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
25.	802-017C	HHCS 3/8-16X1 GR5
26.	802-323C	HHCS 1/2-13X6 1/2 GR5
27.	802-114C	HHCS 3/8-16X2 1/2 GR5
28.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
29.	198-333D	1 1/4 LONG PLASTIC CHAIN IDLER	Used with Middle and Rear Opener.
29.	817-480C	IDLER SPOOL 1.44OD X.53B X1.5L	Used with Front Opener.
30.	198-257D	IDLER SPACER TUBE 1/2OD X 1.56
31.	837-160C	SEAL INSERT HOPPER LG OVAL BTM
32.	891-738C	GASKET ORING 1/8 RND X 3.5 ID

36901

(Applies to YP425A, YP625A, YP825A only)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg36901 837-022C	Image No. PLANTER HOPPER LID 3 BU
2.	816-841C	BULB SEAL 3 BU LID
3.	804-075C	WASHER FLAT 1/4 USS PLT
4.	804-006C	WASHER LOCK SPRING 1/4 PLT
5.	802-257C	HFSS 1/4-20X3/4 GR5
6.	403-744H	3 BU LID HINGE SPRT WMT
7.	403-745S	3 BU LID AND HINGE ASSEMBLY
8.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
9.	804-010C	WASHER FLAT 5/16 USS PLT
10.	403-905D	PIVOT BUSHING
11.	890-308C	9 1/4-15 X 70LB GAS SPRING
12.	403-743H	3 BU HOPPER HINGE WMT
13.	804-111C	WASHER MACH 1.00 X .625 X 14GA
14.	802-159C	HHCS 5/16-18X1 GR5
15.	802-092C	RHSNB 5/16-18X3/4 GR5
16.	837-021C	PLANTER HOPPER 3 BU WIDE DISCH
17.	403-740K	3 BUSHEL HOPPER ASY LG DISCH
18.	816-793C	DRAW LATCH, RUBBER 4 9/16
19.	403-896D	MOUNTING STRAP 3 BU
20.	802-014C	HHCS 3/8-16X3/4 GR5
21.	804-013C	WASHER LOCK SPRING 3/8 PLT
22.	803-014C	NUT HEX 3/8-16 PLT
23.	403-747H	3 BU HOPPER MOUNT WELDMENT
24.	802-017C	HHCS 3/8-16X1 GR5
25.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
26.	802-258C	HHCS 1/2-13X1 GR5
27.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
28.	802-323C	HHCS 1/2-13X6 1/2 GR5
29.	802-114C	HHCS 3/8-16X2 1/2 GR5
30.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
31.	198-333D	1 1/4 LONG PLASTIC CHAIN IDLER
32.	198-257D	IDLER SPACER TUBE 1/2OD X 1.56
33.	821-069C	EZEE-GLIDE PLUS LUBRICANT-5GAL
34.	837-160C	SEAL INSERT HOPPER LG OVAL BTM
35.	891-738C	GASKET ORING 1/8 RND X 3.5 ID

Includes items 1-6

Includes items 7-16

Table of Contents Part Number Index 25 Series Keeton Seed Firmer (Option)

(Applies to YP425A, YP625A, YP825A only)

21855

25 Series Keeton Seed Firmer (Option)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg21855	Image No.
1.	120825	KEETON NARROW TAIL
2.	129BXT822	BRACKET FOR 890-840C REV A&B
3.	802-252C	RHSNB 3/8-16X1 3/4 GR5
4.	803-014C	NUT HEX 3/8-16 PLT
5.	804-013C	WASHER LOCK SPRING 3/8 PLT
6.	803-043C	NUT HEX WHIZ 5/16-18 PLT
7.	802-172C	HHCS 5/16-18X2 1/2 GR5

Hub Assembly (815-255C and 204-084S)

(Applies to YP425A, YP625A, YP825A only)

22747

Hub Assembly (815-255C and 204-084S)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg22747	Image No.
1.	802-051C	HHCS 5/8-11X1 1/2 GR5
2.	CR14971	MARTIN 3 LIP SEAL (JD AA26234)
3.	822-030C	BEARING CONE L44643
4.	822-080C	BEARING CUP L44610
5.	802-030C	RHSNB 7/16-14X1 3/4 GR5
6.	HU13	MARTIN HA13270 HUB HOUSING
7.	803-052C	NUT HEX WHIZ 7/16-14 PLT
8.	804-025C	WASHER FLAT 3/4 SAE PLT
9.	803-053C	NUT HEX SLOTTED 3/4-16
10.	HS1328	MARTIN HUB CAP
11.	805-045C	PIN COTTER 5/32 X 1 1/4 LG
12.	802-214C	RHSNB 1/2-13X1 1/4 GR5
13.	204-329D	NARROW HUB BOLT SPACER
14.	204-328D	NARROW COULTER HUB
15.	822-215C	BRG 5206KPP3 1.187 IDX2.44 OD
16.	800-232C	SNAP RING INT 2.44 OD .078W
17.	802-051C	HHCS 5/8-11X1 1/2 GR5
18.	204-084S	GP25S NARROW HUB ASM	Includes items 12-17
19.	815-255C	ROW CLEANER HUB ASM	Includes items 1-11

Table of Contents Part Number Index Rigid 13" Row Cleaner

(Applies to YP425A, YP625A, YP825A only)

22773

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg22773	Image No.
1.	207-067D	UMC RC PIVOT TUBE
2.	207-099H	DOUBLE ARM RC WLD
3.	802-331C	RHSNB 1/2-13X1 3/4 GR5
4.	803-169C	NUT HEX FLG. LOCK 1/2-13 PLT.
5.	815-255C	ROW CLEANER HUB ASM	Refer to Unit Mount Coulter
6.	817-615C	RC ARM PIVOT BUSHING
7.	828-057C	RC HUB LOCK
8.	828-058C	RIGID 13'" ROW CLEANER LH
8.	828-059C	RIGID 13'" ROW CLEANER RH
9.	207-142V	RIGID ROW CLEANER ASM RH
9.	207-143V	RIGID ROW CLEANER ASM LH
10.	828-060C	DEPTH BEND WHEEL
11.	818-525C	DECAL SHARP OBJECT WARNING
12.	207-148H	UM ROW CLEAN DOWN STOP WLDM
13.	802-009C	RHSNB 5/16-18X1 1/4 GR5
14.	803-008C	NUT HEX 5/16-18 PLT
15.	804-009C	WASHER LOCK SPRING 5/16 PLT
16.	804-017C	WASHER FLAT 1/2 USS PLT
17.	804-029C	WASHER FLAT 1 SAE

(Applies to YP425A, YP625A, YP825A only)

29096

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29096	Image No.
1.	204-139H	UNIT MOUNTED COULTER MOUNT
2.	407-220H	DBL ROW CLNR EXTENDED MNT LH
3.	407-221H	DBL ROW CLNR EXTENDED MNT RH
4.	207-099H	DOUBLE ARM RC WLD
4.	207-094H	SINGLE ARM RC WLD LH
4.	207-095H	SINGLE ARM RC WLD RH
5.	802-219C	HHCS 7/8-9X2 GR5
6.	803-049C	NUT HEX 7/8-9 PLT
7.	803-169C	NUT HEX FLG. LOCK 1/2-13 PLT.
8.	804-017C	WASHER FLAT 1/2 USS PLT
9.	817-615C	RC ARM PIVOT BUSHING
10.	207-067D	UMC RC PIVOT TUBE
11.	802-331C	RHSNB 1/2-13X1 3/4 GR5

(Applies to YP425A, YP625A, YP825A only)

27304

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg27304	Image No.
1.	207-072D	UMRC MOUNT ROUND TUBE
2.	207-106D	ROW CLEANER PIVOT PIPE
3.	207-107D	UMRC ADJUSTMENT TUBE
4.	207-108D	SPACER
5.	207-214H	UMRC MOUNT WELD
6.	802-106C	RHSNB 1/2-13X1 1/2 GR5
7.	802-673C	HHCS 7/16-14X1 1/4 GR5 PLT
8.	803-020C	NUT HEX 1/2-13 PLT
9.	804-014C	WASHER LOCK 7/16 PLT
10.	804-015C	WASHER LOCK SPRING 1/2 PLT
11.	805-385C	PIN CLEVIS 3/8 X 3 PLT
12.	817-084C	PARALLEL ARM PIVOT BUSHING
13.	805-031C	PIN HAIR COTTER .092 WIRE
14.	802-463C	RHSNB 1/2-13X5 GR5
15.	803-169C	NUT HEX FLG. LOCK 1/2-13 PLT.

Table of Contents Part Number Index Seed Lok 6" (404-093K)

(Applies to YP425A, YP625A, YP825A only)

17663

Table of Contents Part Number Index Seed Lok 6" (404-093K)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg17663	Image No.
1.	805-045C	PIN COTTER 5/32 X 1 1/4 LG
2.	404-213D	LEVER, SEED LOK
3.	807-106C	SPRING .540 O.D.X 1 1/4 X.054W
4.	404-088H	LOCK ROD WELD
5.	404-144D	SEED LOK MOUNT
6.	802-092C	RHSNB 5/16-18X3/4 GR5
7.	803-043C	NUT HEX WHIZ 5/16-18 PLT
8.	206-010D	JD KINZE SEED LOK LOWER MOUNT
9.	800-166C	SNAP RING 1/2 EXTERNAL HEAVY
10.	404-061D	SEED LOK WHEEL ARM
11.	801-078C	SCR HX SKT BUT CP 3/8-16X3/4
12.	804-078C	WASHER INTERNAL STAR 3/8 PLT.
13.	122-231A	RPBY 188-008V
14.	801-084C	SCR PH THD FMG #10X1/2 TP ZP
15.	816-173C	RETAINER W/BONDED SEAL 4BLT
16.	817-191C	5/8 X 6 SEED LOK WHEEL
17.	206-014S	6 SEED LOK ASSEMBLY
18.	206-012D	WASHER MACH 1.50 X .510 X 10G
19.	807-125C	SPRING EXT 1 X 4 X .135 WD
20.	206-011D	SEED LOK PIVOT PIN
21.	404-212D	LEVER STOP

(Applies to YP425A, YP625A, YP825A only)

21993

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg21993	Image No.
1.	814-173C	4 X 16 GAUGE TIRE ASSY-PLASTIC
2.	814-257C	2.5X16 SIDE DEPTH WHEEL ASSY
3.	814-260C	3X16 SIDE DEPTH WHEEL ASSY
4.	803-177C	803-184 FLG TP LK 5/16-18ZNYCR
5.	814-175C	4 X 16 GAUGE WHEEL RIM
6.	814-113C	4 1/2 X 16 GAUGE TIRE
7.	822-170C	BRG .63ID PRESS WHL ASY
8.	817-331C	4 X 16 GAUGE WHEEL RIM HALF
9.	802-094C	HFSS 5/16-18X1 3/4 GR5
10.	802-431C	HFSS 5/16-18X1 GR5 PLT
11.	802-883C	HSBHCS 5/16-18X5/8" GR5
12.	817-541C	3X16 NYLON WHEEL HALF-40MM
13.	814-258C	2.25X16'" TIRE FOR 814-257C
14.	814-259C	2.25X16'" RIM HALF FOR 814-257C
15.	814-261C	3X 16'" TIRE FOR 814-260C

Comments

Revision

Table of Contents Part Number Index

25 Series Side Depth Wheel Scraper Assembly

(Applies to YP425A, YP625A, YP825A only)

31830

Table of Contents Part Number Index

25 Series Side Depth Wheel Scraper Assembly

(Applies to YP425A, YP625A, YP825A only)

Re£ Part No. Part Description

Comments

Revision

dwg31830

1. 802-099C

2. 404-194D

2. 404-196D

2. 404-195D

3. 804-016C

4. 803-020C

Image No.

Shown

HHCS 1/2-13X3 1/4 GR5 2.5" GAUGE WHEEL SCRAPER 4" GAUGE WHEEL SCRAPER 3" GAUGE WHEEL SCRAPER WASHER FLAT 1/2 SAE PLT NUT HEX 1/2-13 PLT

(Applies to YP425A, YP625A, YP825A only)

22748

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg22748	Image No.
1.	207-067D	UMC RC PIVOT TUBE
2.	207-095H	SINGLE ARM RC WLD RH
2.	207-094H	SINGLE ARM RC WLD LH
3.	802-331C	RHSNB 1/2-13X1 3/4 GR5
4.	803-169C	NUT HEX FLG. LOCK 1/2-13 PLT.
5.	815-255C	ROW CLEANER HUB ASM
6.	817-615C	RC ARM PIVOT BUSHING
7.	828-057C	RC HUB LOCK
8.	828-059C	RIGID 13'" ROW CLEANER RH
8.	828-058C	RIGID 13'" ROW CLEANER LH
9.	828-060C	DEPTH BEND WHEEL
10.	818-525C	DECAL SHARP OBJECT WARNING
11.	207-142V	RIGID ROW CLEANER ASM RH
11.	207-143V	RIGID ROW CLEANER ASM LH
12.	207-148H	UM ROW CLEAN DOWN STOP WLDM
13.	802-009C	RHSNB 5/16-18X1 1/4 GR5
14.	803-008C	NUT HEX 5/16-18 PLT
15.	804-009C	WASHER LOCK SPRING 5/16 PLT
16.	804-017C	WASHER FLAT 1/2 USS PLT
17.	804-029C	WASHER FLAT 1 SAE

Comments

Shown

Refer to Unit Mount Coulter for breakdown

Revision

(Applies to YP425A, YP625A, YP825A only)

31276

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg31276	Image No.
1.	801-083C	SCREW SET 5/8-11X1 1/2 GR8 CUP
2.	204-072D	CLAMP SHANK 1 1/2 DIA
3.	805-043C	PIN SPIROL 3/8X2 1/2 PLAIN
4.	803-020C	NUT HEX 1/2-13 PLT
5.	804-015C	WASHER LOCK SPRING 1/2 PLT
6.	204-013D	SHANK 1 1/2D X 26 FERT COULT
7.	820-180C	COULTER TURBO 20 X.197X1.78
7.	820-074C	COULTER BLADE 20 FLUTED
8.	204-040D	CLAMP PLT 7 BAR
9.	200-039V	COULTER HUB & CUP ASSY	Includes items 40-42
10.	149-032D	LOW PRO COULTER STOP
11.	249-002D	PVT CLTR CASTING MOUNT RH
12.	804-165C	WASHER MACH 1 7/8X1 1/4X 14GA
13.	800-177C	SNAP RING EXT 1 1/4 HEAVY
14.	800-164C	SNAP RING 3/4 EXTERNAL HEAVY
15.	805-331C	COULTER SPRING GUIDE TUBE
16.	802-718C	EYE BOLT 3/4-10X14 3/4 LG SP
17.	149-559D	SPRING 2.25 O.D. X .5 COIL
18.	149-558D	COULTER SPRING WASHER
19.	803-048C	NUT HEX JAM 3/4-10 PLT
20.	890-389C	BUSHING 1.50ODX1.25IDX2.94
21.	204-664H	VAN I 20" SWING ARM WELDMENT
22.	817-513C	BUSHING 1X3/4X1 1/8 FLG HD
23.	804-156C	WASHER MACH 1 1/4X3/4X14GA
24.	802-338C	RHSNB 5/8-11X3 GR5
25.	204-172D	BACKING PLATE
26.	204-179D	EXTENSION ARM (CPH)
27.	804-019C	WASHER FLAT 5/8 USS PLT
28.	804-095C	WASHER FLAT 5/8 HARD ASTMF436
29.	803-196C	NUT HEX FLANGE 5/8-11 PLT
30.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
31.	804-017C	WASHER FLAT 1/2 USS PLT
32.	204-029D	SPACER
33.	204-242D	FERTILIZER TINE CLIP
34.	407-434H	YP COULTER FERT TINE WELDMENT
35.	204-241D	FERTILIZER TINE SPACER
36.	802-413C	HHCS 1/2-13X4 1/2 GR5
37.	802-214C	RHSNB 1/2-13X1 1/4 GR5
38.	816-009C	OIL SEAL DOUBLE LIP
39.	822-021C	BRG CONE 1.25ID LM-67048
40.	822-020C	BRG CUP LM-67010
41.	800-001C	GREASE ZERK STRAIGHT 1/4-28
42.	200-002D	RPBY 200-039V
43.	804-055C	WASHER SPINDLE - 7/8
44.	803-029C	NUT HEX SLOTTED 7/8-14 PLT
45.	805-017C	PIN COTTER 3/16 X 1 3/4 PLT
46.	200-001D	HUB GREASE CAP
47.	801-015C	SCREW SET SCKT HD 1/4-20X1/2
48.	204-268D	DRY FERTILIZER TUBE COLLAR
49.	802-260C	HHCS 1/2-13X7 GR5
50.	820-133C	1 1/2 X 26 OFFSET SHANK
51.	204-399D	COULTER CLAMP 7H
52.	806-053C	U-BOLT 5/8-11 X 7 1/32 X 6 1/2
53.	803-021C	NUT HEX 5/8-11 PLT
54.	804-022C	WASHER LOCK SPRING 5/8 PLT
55.	801-040C	SCREW SQ HD 5/8-11 X 1 CUP PT

(Applies to YP425A, YP625A, YP825A only)

22774

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg22774	Image No.
1.	204-084S	GP25S NARROW HUB ASM	Refer to "Hub Assembly (815-255C & 204-084S)" for breakdown
2.	204-139H	UNIT MOUNTED COULTER MOUNT
3.	802-060C	HHCS 5/8-11X4 GR5
4.	802-106C	RHSNB 1/2-13X1 1/2 GR5
5.	803-020C	NUT HEX 1/2-13 PLT
6.	803-021C	NUT HEX 5/8-11 PLT
7.	804-015C	WASHER LOCK SPRING 1/2 PLT
8.	804-022C	WASHER LOCK SPRING 5/8 PLT
9.	838-482C	DECAL GP PLANTING COMPONENTS
10.	820-327C	COULTER BLADE (TURBO) 15'" OD
10.	820-331C	COULTER BLADE (FLUTED) 15'" OD	Shown
11.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT

Press Wheel Assembly (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29331

Press Wheel Assembly (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments		Revision
	dwg29331	Image No.
1.	199-107D	PW SPRING HANDLE
2.	199-109H	RPBY 199-147A
2.	199-108H	RPBY 199-146A
3.	199-059H	25P 16 DEG CENTERED PW MOUNT
4.	199-088D	25PPW HANDLE SPACER TUBE
5.	404-147D	PARALLEL ARM PIVOT TUBE
6.	405-031D	1/4 PW SPACER 5/8 DIA
7.	802-160C	HHCS 5/8-11X3 1/4 GR5
8.	802-616C	HHCS 3/8-16X5 1/2 GR5
9.	803-021C	NUT HEX 5/8-11 PLT
10.	199-113D	SPRING ALIGNMENT BUSHING
11.	804-011C	WASHER FLAT 3/8 USS PLT
12.	804-022C	WASHER LOCK SPRING 5/8 PLT
13.	199-106D	RPBY 199-146A OR 199-147A
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
16.	807-278C	SPRING 1 5/8 OD X 8.2
17.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to Press Wheel	Breakdown	for
			breakdown
18.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to Press Wheel	Breakdown	for
			breakdown
19.	817-083C	PRESS WHEEL ARM PIVOT BUSHING
20.	805-417C	PIN CLEVIS 5/8 X 3 49/64 USBL
21.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
22.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
23.	199-147A	25P MID PW MOUNT KIT
24.	199-149H	25P MID PW MOUNT UPDATE
25.	802-030C	RHSNB 7/16-14X1 3/4 GR5
26.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
27.	804-014C	WASHER LOCK 7/16 PLT
28.	804-041C	WASHER FLAT 7/16 SAE PLT
29.	890-598C	BUSHING 3/4OD X 5/8ID X 1/2 LG
30.	890-524C	20 SER PW ARM PIVOT SPACER TB

Table of Contents Part Number Index Press Wheel Assembly (S/N B1009N - B1028N) (S/N B1044Q - B1110Q) (S/N B1015S - B1058S)

(Applies to YP425A, YP625A, YP825A only)

31518

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg31518	Image No.
1.	199-088D	25PPW HANDLE SPACER TUBE
2.	199-107D	PW SPRING HANDLE
3.	199-113D	SPRING ALIGNMENT BUSHING
4.	199-114D	PRESS WHEEL PVT MNT TUBE
5.	199-140H	LONG PQ MOUNT
5.	199-141H	25P MID PW MOUNT	Shown
6.	199-145H	25P 20 DEG CENTERED PW MOUNT	Shown. Used with 20 Deg Press Wheel
6.	199-144H	25P 16 DEG CENTERED PW MOUNT	Used with 16 Deg Press Wheel
7.	404-147D	PARALLEL ARM PIVOT TUBE	Only used with 20 Deg Press Wheel
8.	405-031D	1/4 PW SPACER 5/8 DIA
9.	802-060C	HHCS 5/8-11X4 GR5	Shown. Used with 20 Deg Press Wheel
9.	802-160C	HHCS 5/8-11X3 1/4 GR5	Used with 16 Deg Press Wheel
10.	802-413C	HHCS 1/2-13X4 1/2 GR5
11.	803-021C	NUT HEX 5/8-11 PLT
12.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
13.	804-022C	WASHER LOCK SPRING 5/8 PLT
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
16.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
17.	805-432C	PIN CLEVIS 5/8 X 3 1/4
18.	807-278C	SPRING 1.8 OC X 11 LG
19.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to Press Wheel Breakdown for breakdown
20.	817-084C	PARALLEL ARM PIVOT BUSHING
21.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to Press Wheel Breakdown for breakdown

Press Wheel Assembly LH Short (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29332

Press Wheel Assembly LH Short (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg29332	Image No.
1.	199-107D	PW SPRING HANDLE
2.	199-109H	RPBY 199-147A
3.	199-057H	25P RH OFFSET PW MOUNT	Used on short (front) stagger row units on twin row spacing
3.	199-058H	25P LH OFFSET PW MOUNT	Used on long (rear) stagger row units on twin row spacing
4.	199-088D	25PPW HANDLE SPACER TUBE
5.	404-147D	PARALLEL ARM PIVOT TUBE
6.	405-031D	1/4 PW SPACER 5/8 DIA
7.	802-160C	HHCS 5/8-11X3 1/4 GR5
8.	802-616C	HHCS 3/8-16X5 1/2 GR5
9.	803-021C	NUT HEX 5/8-11 PLT
10.	199-113D	SPRING ALIGNMENT BUSHING
11.	804-011C	WASHER FLAT 3/8 USS PLT
12.	804-022C	WASHER LOCK SPRING 5/8 PLT
13.	199-106D	RPBY 199-146A OR 199-147A
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
16.	807-278C	SPRING 1 5/8 OD X 8.2
17.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to "Press Wheel Breakdown" for
			breakdown
18.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to "Press Wheel Breakdown" for
			breakdown
19.	817-083C	PRESS WHEEL ARM PIVOT BUSHING
20.	805-417C	PIN CLEVIS 5/8 X 3 49/64 USBL
21.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
22.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
23.	199-015D	PW HANDLE SPACER TUBE
24.	204-133H	LH DRIBBLER TUBE
25.	802-092C	RHSNB 5/16-18X3/4 GR5
26.	804-009C	WASHER LOCK SPRING 5/16 PLT
27.	803-008C	NUT HEX 5/16-18 PLT
28.	199-147A	25P MID PW MOUNT KIT
29.	199-149H	25P MID PW MOUNT UPDATE
30.	802-030C	RHSNB 7/16-14X1 3/4 GR5
31.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
32.	804-014C	WASHER LOCK 7/16 PLT
33.	804-041C	WASHER FLAT 7/16 SAE PLT
34.	890-524C	20 SER PW ARM PIVOT SPACER TB
35.	890-598C	BUSHING 3/4OD X 5/8ID X 1/2 LG

(Applies to YP425A, YP625A, YP825A only)

31519

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg31519	Image No.
1.	199-015D	PW HANDLE SPACER TUBE
2.	199-088D	25PPW HANDLE SPACER TUBE
3.	199-107D	PW SPRING HANDLE
4.	199-113D	SPRING ALIGNMENT BUSHING
5.	199-114D	PRESS WHEEL PVT MNT TUBE
6.	199-141H	25P MID PW MOUNT
7.	199-143H	25P LH OFFSET PW MOUNT
8.	405-031D	1/4 PW SPACER 5/8 DIA
9.	802-160C	HHCS 5/8-11X3 1/4 GR5
10.	802-413C	HHCS 1/2-13X4 1/2 GR5
11.	803-021C	NUT HEX 5/8-11 PLT
12.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
13.	804-022C	WASHER LOCK SPRING 5/8 PLT
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
16.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
17.	805-432C	PIN CLEVIS 5/8 X 3 1/4
18.	807-278C	SPRING 1.8 OC X 11 LG
19.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to Press Wheel	Breakdown	for
			breakdown
20.	817-084C	PARALLEL ARM PIVOT BUSHING
21.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to Press Wheel	Breakdown	for
			breakdown
22.	803-008C	NUT HEX 5/16-18 PLT
23.	804-009C	WASHER LOCK SPRING 5/16 PLT
24.	204-133H	LH DRIBBLER TUBE
25.	802-092C	RHSNB 5/16-18X3/4 GR5

Press Wheel Assembly RH Long (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29333

Press Wheel Assembly RH Long (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg29333	Image No.
1.	199-107D	PW SPRING HANDLE
2.	199-108H	RPBY 199-146A
3.	199-057H	25P RH OFFSET PW MOUNT	Used on short (front) stegger row units on twin row spacing
3.	199-060H	25P LONG PW MOUNT EXTENSION	Used on short (front) stegger row units on twin row spacing
4.	199-088D	25PPW HANDLE SPACER TUBE
5.	404-147D	PARALLEL ARM PIVOT TUBE
6.	405-031D	1/4 PW SPACER 5/8 DIA
7.	802-160C	HHCS 5/8-11X3 1/4 GR5
8.	802-616C	HHCS 3/8-16X5 1/2 GR5
9.	803-021C	NUT HEX 5/8-11 PLT
10.	199-113D	SPRING ALIGNMENT BUSHING
11.	804-011C	WASHER FLAT 3/8 USS PLT
12.	804-022C	WASHER LOCK SPRING 5/8 PLT
13.	199-106D	RPBY 199-146A OR 199-147A
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
16.	807-278C	SPRING 1 5/8 OD X 8.2
17.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to "Press Wheel Breakdown" for
			breakdown
18.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to "Press Wheel Breakdown" for
			breakdown
19.	817-083C	PRESS WHEEL ARM PIVOT BUSHING
20.	805-417C	PIN CLEVIS 5/8 X 3 49/64 USBL
21.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
22.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
23.	199-015D	PW HANDLE SPACER TUBE
24.	204-134H	RH DRIBBLER TUBE
25.	802-092C	RHSNB 5/16-18X3/4 GR5
26.	804-009C	WASHER LOCK SPRING 5/16 PLT
27.	803-008C	NUT HEX 5/16-18 PLT
28.	199-147A	25P MID PW MOUNT KIT
29.	199-149H	25P MID PW MOUNT UPDATE
30.	802-030C	RHSNB 7/16-14X1 3/4 GR5
31.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
32.	804-014C	WASHER LOCK 7/16 PLT
33.	804-041C	WASHER FLAT 7/16 SAE PLT
34.	890-524C	20 SER PW ARM PIVOT SPACER TB
35.	890-598C	BUSHING 3/4OD X 5/8ID X 1/2 LG

(Applies to YP425A, YP625A, YP825A only)

31517

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg31517	Image No.
1.	199-015D	PW HANDLE SPACER TUBE
2.	199-088D	25PPW HANDLE SPACER TUBE
3.	199-107D	PW SPRING HANDLE
4.	199-113D	SPRING ALIGNMENT BUSHING
5.	199-114D	PRESS WHEEL PVT MNT TUBE
6.	199-140H	LONG PQ MOUNT
7.	199-142H	25P RH OFFSET PW MOUNT
8.	405-031D	1/4 PW SPACER 5/8 DIA
9.	802-160C	HHCS 5/8-11X3 1/4 GR5
10.	802-413C	HHCS 1/2-13X4 1/2 GR5
11.	803-021C	NUT HEX 5/8-11 PLT
12.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
13.	804-022C	WASHER LOCK SPRING 5/8 PLT
14.	805-067C	PIN COTTER 1/8 X 3/4
15.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
16.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
17.	805-432C	PIN CLEVIS 5/8 X 3 1/4
18.	807-278C	SPRING 1.8 OC X 11 LG
19.	814-238C	1.25 X 13.5 PRESS WHEEL ASSY	Refer to Press Wheel	Breakdown	for
			breakdown
20.	817-084C	PARALLEL ARM PIVOT BUSHING
21.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG	Refer to Press Wheel	Breakdown	for
			breakdown
22.	803-008C	NUT HEX 5/16-18 PLT
23.	804-009C	WASHER LOCK SPRING 5/16 PLT
24.	204-134H	RH DRIBBLER TUBE
25.	802-092C	RHSNB 5/16-18X3/4 GR5

12-12D Cast Press Wheels (S/N B1029N+) (S/N B1111Q+) (S/N B1059S+)

(Applies to YP425A, YP625A, YP825A only)

34488

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg34488	Image No.
1.	199-152H	25 SER 12 DEG ADJ PW ARM WLDMT
2.	802-160C	HHCS 5/8-11X3 1/4 GR5
3.	804-022C	WASHER LOCK SPRING 5/8 PLT
4.	803-171C	MAC-LOK 3/8-16 SUPER FLANGE
5.	199-135D	CAST PRESS WHEEL COVER DISK
6.	199-151S	CAST WEDGE PW ASY 40 DEG
7.	802-079C	HHCS 3/8-16X1 1/4 GR5
8.	405-031D	1/4 PW SPACER 5/8 DIA
9.	802-082C	HHCS 1/2-13X1 3/4 GR5
10.	804-094C	WASHER FLAT 1/2 HARD ASTMF436
11.	199-153H	25 SER 12 DEG STAG PW ARM WLD
12.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
13.	805-363C	PIN COTTER 1/8 X 1
14.	805-436C	PIN CLEVIS 7/16 X 1 1/2
15.	812-398C	PRESS WHEEL SPRING ADJ HANDLE
16.	802-413C	HHCS 1/2-13X4 1/2 GR5
17.	199-114D	PRESS WHEEL PVT MNT TUBE
18.	199-113D	SPRING ALIGNMENT BUSHING
19.	805-432C	PIN CLEVIS 5/8 X 3 1/4
20.	817-084C	PARALLEL ARM PIVOT BUSHING
21.	199-141H	25P MID PW MOUNT
22.	807-278C	SPRING 1.8 OC X 11 LG
23.	800-054C	SNAP RING INT 40 MM
24.	822-170C	BRG .63ID PRESS WHL ASY
25.	199-128D	CAST WEDGE PW MACHINED 40 DEG
26.	199-140H	LONG PW MOUNT

Revision

Comments

(ONLY) used with Staggered Press Wheel Weldment

(ONLY) used with Staggered Press Wheel Weldment Includes items: 23-25 (ONLY) used with Staggered Press Wheel Weldment

Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1029N+) (S/N B1111Q+) (S/N B1059S+)

(Applies to YP425A, YP625A, YP825A only)

34565

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg34565	Image No.
1.	199-141H	25P MID PW MOUNT
2.	199-140H	LONG PW MOUNT
3.	817-084C	PARALLEL ARM PIVOT BUSHING
4.	805-432C	PIN CLEVIS 5/8 X 3 1/4
5.	805-363C	PIN COTTER 1/8 X 1
6.	199-113D	SPRING ALIGNMENT BUSHING
7.	807-278C	SPRING 1.8 OC X 11 LG
8.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
9.	199-153H	25 SER 12 DEG STAG PW ARM WLD
10.	199-114D	PRESS WHEEL PVT MNT TUBE
11.	802-413C	HHCS 1/2-13X4 1/2 GR5
12.	812-398C	PRESS WHEEL SPRING ADJ HANDLE
13.	804-094C	WASHER FLAT 1/2 HARD ASTMF436
14.	805-436C	PIN CLEVIS 7/16 X 1 1/2
15.	814-400C	1.25 X 13.5 WEDGE HD PW ASSY
16.	802-082C	HHCS 1/2-13X1 3/4 GR5
17.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG
18.	405-031D	1/4 PW SPACER 5/8 DIA
19.	804-022C	WASHER LOCK SPRING 5/8 PLT
20.	802-160C	HHCS 5/8-11X3 1/4 GR5
21.	204-133H	LH DRIBBLER TUBE
22.	804-009C	WASHER LOCK SPRING 5/16 PLT
23.	803-008C	NUT HEX 5/16-18 PLT
24.	204-134H	RH DRIBBLER TUBE
25.	802-092C	RHSNB 5/16-18X3/4 GR5

Press Wheel Assembly with Spider Wheels (S/N B1008N-) (S/N B1043Q-) (S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

29716

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg29716 199-087H	Image No. 25P 20 DEG CENTERED PW MOUNT	Shown
1.	199-057H	25P RH OFFSET PW MOUNT
1.	199-058H	25P LH OFFSET PW MOUNT
1.	199-059H	25P 16 DEG CENTERED PW MOUNT	Used on 16 Deg. 10" Spacing
2.	199-088D	25PPW HANDLE SPACER TUBE
3.	199-106D	RPBY 199-146A OR 199-147A
4.	199-107D	PW SPRING HANDLE
5.	199-108H	RPBY 199-146A
5.	199-109H	RPBY 199-147A
6.	199-113D	SPRING ALIGNMENT BUSHING
7.	404-147D	PARALLEL ARM PIVOT TUBE	Used with 199-087H
8.	405-023S	LH 45 DEG TOOTH WHEEL ASM
9.	405-024S	RH 45 DEG TOOTH WHEEL ASM
10.	405-031D	1/4 PW SPACER 5/8 DIA
11.	802-060C	HHCS 5/8-11X4 GR5
11.	802-162C	HHCS 5/8-11X3 1/2 GR5	Used on 16 Deg. 10" Spacing
12.	802-616C	HHCS 3/8-16X5 1/2 GR5
13.	803-021C	NUT HEX 5/8-11 PLT
14.	803-209C	NUT FLANGE LOCK 3/8-16 PLT
15.	804-011C	WASHER FLAT 3/8 USS PLT
16.	804-021C	WASHER FLAT 5/8 SAE PLT
17.	804-022C	WASHER LOCK SPRING 5/8 PLT
18.	805-067C	PIN COTTER 1/8 X 3/4
19.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
20.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
21.	805-417C	PIN CLEVIS 5/8 X 3 49/64 USBL
22.	807-278C	SPRING 1 5/8 OD X 8.2
23.	817-083C	PRESS WHEEL ARM PIVOT BUSHING
24.	199-015D	PW HANDLE SPACER TUBE	Used on LH or RH press wheel mount
25.	405-021H	LH 45 DEG TOOTH CLOSING WHEEL
26.	822-170C	BRG .63ID PRESS WHL ASY
27.	800-054C	SNAP RING INT 40 MM
28.	405-022H	RH 45 DEG TOOTH CLOSING WHEEL
29.	802-015C	RHSNB 3/8-16X1 GR5
30.	803-078C	NUT LOCK 3/8-16 NYLON INSERT
31.	405-055D	PLANTER DRAG CHAIN MOUNT	Shown
31.	405-057D	PLANTER DRAG CHAIN MNT NARROW	Used on 16 Deg. 10" Spacing
32.	802-029C	HHCS 7/16-14X1 1/2 GR5
33.	891-186C	TWIST LINK DRAG CHAIN 16 PITCH
34.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
35.	199-146A	25P LONG PW MOUNT KIT
35.	199-147A	25P MID PW MOUNT KIT
36.	199-148H	25P LONG PW MOUNT UPDATE
36.	199-149H	25P MID PW MOUNT UPDATE
37.	802-030C	RHSNB 7/16-14X1 3/4 GR5
38.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
39.	804-014C	WASHER LOCK 7/16 PLT
40.	804-041C	WASHER FLAT 7/16 SAE PLT
41.	805-067C	PIN COTTER 1/8 X 3/4
42.	805-417C	PIN CLEVIS 5/8 X 3 49/64 USBL
43.	890-524C	20 SER PW ARM PIVOT SPACER TB
44.	890-598C	BUSHING 3/4OD X 5/8ID X 1/2 LG

(Applies to YP425A, YP625A, YP825A only)

31520

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg31520 199-145H	Image No. 25P 20 DEG CENTERED PW MOUNT	Shown. Used with 20 Deg Press
1.	199-144H	25P 16 DEG CENTERED PW MOUNT	Wheels Used with 16 Deg Press Wheels
1.	199-143H	25P LH OFFSET PW MOUNT	LH
1.	199-142H	25P RH OFFSET PW MOUNT	RH
2.	199-088D	25PPW HANDLE SPACER TUBE
3.	199-114D	PRESS WHEEL PVT MNT TUBE
4.	199-107D	PW SPRING HANDLE
5.	199-141H	25P MID PW MOUNT	Shown
5.	199-140H	LONG PQ MOUNT
6.	199-113D	SPRING ALIGNMENT BUSHING
7.	404-147D	PARALLEL ARM PIVOT TUBE	Only used with 20 Deg Press Wheels
8.	405-023S	LH 45 DEG TOOTH WHEEL ASM	Includes items 25-27
9.	405-024S	RH 45 DEG TOOTH WHEEL ASM	Includes items 26-28
10.	405-031D	1/4 PW SPACER 5/8 DIA
11.	802-060C	HHCS 5/8-11X4 GR5	Only used with 20 Deg Press Wheels
11.	802-162C	HHCS 5/8-11X3 1/2 GR5
12.	802-413C	HHCS 1/2-13X4 1/2 GR5
13.	803-021C	NUT HEX 5/8-11 PLT
14.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
15.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
16.	804-021C	WASHER FLAT 5/8 SAE PLT	Not used with 20 Deg Press Wheels
17.	804-022C	WASHER LOCK SPRING 5/8 PLT
18.	805-067C	PIN COTTER 1/8 X 3/4
19.	805-109C	PIN COTTER 1/8 X 1 1/4 PLT
20.	805-183C	PIN CLEVIS 7/16 X 3 17/64 USBL
21.	805-432C	PIN CLEVIS 5/8 X 3 1/4
22.	807-278C	SPRING 1 5/8 OD X 8.2
23.	817-084C	PARALLEL ARM PIVOT BUSHING
24.	199-015D	PW HANDLE SPACER TUBE	Used on LH or RH press wheel mount
25.	405-021H	LH 45 DEG TOOTH CLOSING WHEEL
26.	822-170C	BRG .63ID PRESS WHL ASY
27.	800-054C	SNAP RING INT 40 MM
28.	405-022H	RH 45 DEG TOOTH CLOSING WHEEL
29.	802-015C	RHSNB 3/8-16X1 GR5
30.	803-078C	NUT LOCK 3/8-16 NYLON INSERT
31.	405-055D	PLANTER DRAG CHAIN MOUNT	Shown
31.	405-057D	PLANTER DRAG CHAIN MNT NARROW	Used on 16 Deg. 10" Spacing
32.	802-029C	HHCS 7/16-14X1 1/2 GR5
33.	891-186C	TWIST LINK DRAG CHAIN 16 PITCH

(Applies to YP425A, YP625A, YP825A only)

34484

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg34484	Image No.
1.	802-079C	HHCS 3/8-16X1 1/4 GR5
2.	804-013C	WASHER LOCK SPRING 3/8 PLT
3.	405-063D	DRAG CHAIN BACKUP PLATE
4.	405-055D	PLANTER DRAG CHAIN MOUNT
5.	802-029C	HHCS 7/16-14X1 1/2 GR5
6.	891-186C	TWIST LINK DRAG CHAIN 16 PITCH
7.	803-229C	NUT HEX FLANGE LOC 7/16-14 PLT
8.	802-160C	HHCS 5/8-11X3 1/4 GR5
9.	804-022C	WASHER LOCK SPRING 5/8 PLT
10.	405-031D	1/4 PW SPACER 5/8 DIA
11.	405-021H	LH 45 DEG TOOTH CLOSING WHEEL
12.	822-170C	BRG .63ID PRESS WHL ASY
13.	800-054C	SNAP RING INT 40 MM
14.	405-023S	LH 45 DEG TOOTH WHEEL ASM	Left Hand, Includes items: 11-13
14.	405-024S	RH 45 DEG TOOTH WHEEL ASM	Right Hand, Includes items: 12, 13 & 31
15.	804-021C	WASHER FLAT 5/8 SAE PLT	Right Hand, Includes items: 12, 13 & 31
16.	802-082C	HHCS 1/2-13X1 3/4 GR5
17.	804-094C	WASHER FLAT 1/2 HARD ASTMF436
18.	199-153H	25 SER 12 DEG STAG PW ARM WLD
19.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
20.	805-363C	PIN COTTER 1/8 X 1
21.	805-436C	PIN CLEVIS 7/16 X 1 1/2
22.	812-398C	PRESS WHEEL SPRING ADJ HANDLE
23.	802-413C	HHCS 1/2-13X4 1/2 GR5
24.	199-114D	PRESS WHEEL PVT MNT TUBE
25.	199-113D	SPRING ALIGNMENT BUSHING
26.	805-432C	PIN CLEVIS 5/8 X 3 1/4
27.	817-084C	PARALLEL ARM PIVOT BUSHING
28.	807-278C	SPRING 1.8 OC X 11 LG
29.	199-141H	25P MID PW MOUNT
30.	199-140H	LONG PW MOUNT
31.	405-022H	RH 45 DEG TOOTH CLOSING WHEEL

(Applies to YP425A, YP625A, YP825A only)

29590

Press Wheels

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29590	Image No.
1.	405-053D	RH CLOSING WHEEL DROP PLATE
2.	405-054D	LH CLOSING WHEEL DROP PLATE
3.	405-052D	PLATE 1X10 OFFSET TO 25P
4.	802-051C	HHCS 5/8-11X1 1/2 GR5
5.	803-021C	NUT HEX 5/8-11 PLT
6.	804-022C	WASHER LOCK SPRING 5/8 PLT
7.	405-028H	SPACER WELDMENT
8.	804-013C	WASHER LOCK SPRING 3/8 PLT
9.	802-022C	HHCS 3/8-16X1 1/2 GR5

(Applies to YP425A, YP625A, YP825A only)

34570

Press Wheels

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg34570	Image No.
1.	814-400C	1.25 X 13.5 WEDGE HD PW ASSY
2.	802-005C	HHCS 1/4-20X1 GR5
3.	817-330C	1 X 12 PRESS WHEEL RIM HALF
4.	822-170C	BRG .63ID PRESS WHL ASY
5.	814-244C	1.25 X 13.5 PRESS WHEEL TIRE
6.	803-088C	NUT HEX LOCK 1/4-20 FLG
7.	814-174C	1 X 12 PRESS WHL ASSY-5203BRG
8.	814-034C	TIRE RUBBER 1 X 12
9.	817-886C	1 X 12 HD PRESS WHEEL RIM HALF
10.	814-238C	RPBY 814-400C

Comments

Revision

(S/N-)

(Applies to YP425A, YP625A, YP825A only)

29937

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg29937	Part Description Image No.	Comments Revision
1.	810-305C	CYL REP 3.0X8X1.50 ROD (WLD)	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-) Refer to Hydraulic Cylinder (810-305C) for breakdown
1.	810-823C	CYL REP 3.0X8X1.50 ROD (TRUN)	(YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) Refer to Hydraulic Cylinder (810-823C) for breakdown
2.	810-304C	CYL REP 3.5X8X1.75 ROD (WLD)	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-) Refer to Hydraulic Cylinder (810-304C) for breakdown
2.	810-822C	CYL REP 3.5X8X1.75 ROD (TRUN)	(YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) Refer to Hydraulic Cylinder (810-822C) for breakdown
3.	841-053C	HH3/8R2 072 3/4MORB 3/4FJIC
4.	841-486C	HH3/8R2 100 3/4MORB
5.	811-725C	EL 90 3/4MJIC	Used w/out markers
6.	841-118C	HH 3/8 R2 170 1/2MNPT 3/4FJIC	(YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)
6.	841-361C	HH3/8R2 170 3/4MORB 3/4FJIC	(YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)
7.	502-068D	HYD HOSE CLAMP BRACKET
8.	811-856C	CP 1/2FNPT MALE QD	(YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)
8.	811-394C	CP 3/4FORB MALE QD POPPET TYPE	(YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)
9.	800-298C	CABLE TIE 2 DIA MIN - BLU
10.	811-078C	TE 3/4MJIC	Used with Markers
11.	811-150C	EL 3/4FJIC 3/4MJIC	Used with Markers
12.	811-324C	AD 3/4MORB 3/4FJIC

(Applies to YP425A, YP625A, YP825A only)

29939

(Applies to YP425A, YP625A, YP825A only)

Rf	Part No. dwg29939	Part Description Image No.	Comments
1.	810-305C	CYL REP 3.0X8X1.50 ROD (WLD)	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-) Refer to Hydraulic Cylinder (810-305C) for breakdown
1.	810-823C	CYL REP 3.0X8X1.50 ROD (TRUN)	(YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) Refer to Hydraulic Cylinder (810-823C) for breakdown
2.	810-306C	CYL 2.5X8X1.50 ROD (WLD)	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-) Refer to Hydraulic Cylinder (810-306C) for breakdown
2.	810-824C	CYL 2.5X8X1.50 ROD (TRUN)	(YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) Refer ti Hydraulic Cylinder (810-824C) for breakdown
3.	810-304C	CYL REP 3.5X8X1.75 ROD (WLD)	(YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-) Refer to Hydraulic Cylinder (810-306C) for breakdown
3.	810-822C	CYL REP 3.5X8X1.75 ROD (TRUN)	(YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) Refer to Hydraulic Cylinder (810-822C) for breakdown
4.	811-690C	EL 45 3/4MORB 3/4MJIC
5.	841-117C	HH 3/8 R2 41 3/4FJIC
6.	841-123C	HH 3/8 R2 14 3/4MORB 3/4FJIC
7.	841-120C	HH 3/8 R2 65 3/4 FJIC 3/4MORB
8.	841-122C	HH3/8 R2 176 3/4MORB 3/4FJIC
9.	841-133C	HH 3/8 R2 44 3/4FJIC 3/4MORB
10.	841-121C	HH 3/8 R2 23 3/4MORB 3/4FJIC
11.	841-116C	HH3/8 R2 17 3/4MORB 3/4MJIC
12.	811-150C	EL 3/4FJIC 3/4MJIC
13.	811-078C	TE 3/4MJIC
14.	841-119C	HH 3/8 R2 55 3/4FJIC
15.	841-118C	HH 3/8 R2 170 1/2MNPT 3/4FJIC	(YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)
15.	841-361C	HH3/8R2 170 3/4MORB 3/4FJIC	(YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)
16.	811-856C	CP 1/2FNPT MALE QD	(YP425A S/N B1012N-) (YP625A S/N B1057Q-) (YP825A S/N B1016S-)
16.	811-394C	CP 3/4FORB MALE QD POPPET TYPE	(YP425A S/N B1013N+) (YP625A S/N B1058Q+) (YP825A S/N B1017S+)
17.	800-298C	CABLE TIE 2 DIA MIN - BLU
18.	502-068D	HYD HOSE CLAMP BRACKET
19.	811-147C	CR 3/4MJIC
20.	811-488C	AD 3/4FORB 3/4FORB	Used on 12TR70 & 16TR70 spacing only.
21.	861-133C	HH3/8R2 065 3/4MORB	Used on 12TR70 & 16TR70 spacing only.

Revision

Table of Contents Part Number Index Fan Hydraulics (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

Fan Hydraulics (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg29781	Image No.
1.	811-069C	CP 1 1/16FORB QD
2.	841-002C	AD 1 1/16MORB 3/4FORB
3.	811-394C	CP 3/4FORB MALE QD POPPET TYPE
4.	841-099C	CP 3/4FORB QD FLATFACE
5.	841-461C	HH1/4 R2 114 9/16 FJIC 9/16MOR
6.	841-462C	HH1/2 R2 114 3/4FJIC 3/4MORB
7.	811-088C	AD 3/4MORB 3/4MJIC
8.	810-037C	VALVE LINE CHECK
9.	811-077C	TE 3/4MORB 3/4MJIC 3/4MJIC
10.	811-065C	EL 9/16MJIC 9/16MORB
11.	841-002C	AD 1 1/16MORB 3/4FORB
12.	811-324C	AD 3/4MORB 3/4FJIC
13.	811-150C	EL 3/4FJIC 3/4MJIC
14.	811-078C	TE 3/4MJIC
15.	841-196C	HH1/2R2 024 3/4FJIC
16.	810-556C	PARKER F-11 FAN MOTOR
17.	841-103C	AD 3/4MORB 9/16FORB

Fan Hydraulics (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

(Applies to YP425A, YP625A, YP825A only)

31754

Fan Hydraulics (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+)

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Revision

Comments

	dwg31754	Image No.
1.	811-088C	AD 3/4MORB 3/4MJIC
2.	811-394C	CP 3/4FORB MALE QD POPPET TYPE
3.	841-529C	CP 3/4FORB MALE QD RELIEF
4.	841-481C	HH1/2R2 230 3/4FJIC 3/4MORB
5.	811-150C	EL 3/4FJIC 3/4MJIC
6.	811-077C	TE 3/4MORB 3/4MJIC 3/4MJIC
7.	811-502C	AD 7/8MORB 3/4FJIC
8.	811-078C	TE 3/4MJIC
9.	810-273C	HYD MOTOR 7/8ORBF
10.	841-196C	HH1/2R2 024 3/4FJIC
11.	810-037C	VALVE LINE CHECK
12.	816-687C	FASSE DUST CAP 1/2" 211-015

PTO Hydraulic Pump Assembly Dry Fertilizer

(Applies to YP425A, YP625A, YP825A only)

34425

PTO Hydraulic Pump Assembly Dry Fertilizer

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg34425	Image No.
1.	841-849C	HH1R4 168 1 5/16FJIC
2.	802-105C	HHCS 5/8-11X9 GR5
3.	804-022C	WASHER LOCK SPRING 5/8 PLT
4.	803-021C	NUT HEX 5/8-11 PLT
5.	841-815C	EL 1 5/16FJIC 1 5/16MJIC
6.	401-841S	HYD RES TANK ASSY
7.	891-109C	FILTER HEAD
8.	891-110C	FILTER ELEMENT SPIN ON
9.	811-091C	EL 3/4MJIC 1 1/16MORB
10.	811-269C	HH1/2R2 036 3/4FJIC
11.	401-834H	6 IN HYD FAN SHROUD
12.	800-120C	NUT CLIP U-TYPE 5/16-18
13.	810-804C	C12 HYD OIL COOLER
14.	802-159C	HHCS 5/16-18X1 GR5
15.	811-268C	HH1/2R2 048 3/4FJIC
16.	811-059C	HH1/2R2 080 3/4FJIC
17.	811-073C	TE 3/4MJIC 3/4MJIC 3/4FJIC
18.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
19.	811-088C	AD 3/4MORB 3/4MJIC
20.	411-825D	FLOW CONTROL MNT PLT FERT
21.	803-014C	NUT HEX 3/8-16 PLT
22.	804-013C	WASHER LOCK SPRING 3/8 PLT
23.	802-138C	HHCS 5/16-18X2 1/4 GR5
24.	810-813C	PRESSURE FLOW CONTROL VALVE
25.	811-857C	PL 3/4MORB
26.	804-009C	WASHER LOCK SPRING 5/16 PLT
27.	803-008C	NUT HEX 5/16-18 PLT
28.	811-807C	HH1/2R2 120 3/4FJIC
29.	891-313C	CHAIN WELD 1/4 GR 43 X 24 LINK
30.	891-314C	1/4 CHAIN THREADED LINK
31.	401-836H	PTO PUMP TORQUE ARM WLDMNT
32.	802-022C	HHCS 3/8-16X1 1/2 GR5
33.	831-101C	PTO PUMP 3.6 CI/REV.
34.	841-814C	EL 45 3/4MJIC 1 1/16MORB
35.	841-653C	EL 45 1 5/16MORB 1 5/16MJIC
36.	858-005C	DECAL DANGER PTO PUMP
37.	818-619C	DECAL HYD VALVE KNOB ADJUSTMNT
38.	858-003C	DECAL 5.5GAL OIL FILL LINE
39.	858-004C	DECAL HOT FLUID PTO RES
40.	818-130C	DECAL CAUTION 540 RPM

Comments

Revision

PTO Hydraulic Pump Assembly w/o Fertilizer

(Applies to YP425A, YP625A, YP825A only)

34424

PTO Hydraulic Pump Assembly w/o Fertilizer

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg34424	Image No.
1.	841-848C	HH1R4 144 1 5/16FJIC
2.	802-105C	HHCS 5/8-11X9 GR5
3.	804-022C	WASHER LOCK SPRING 5/8 PLT
4.	803-021C	NUT HEX 5/8-11 PLT
5.	401-841S	HYD RES TANK ASSY
6.	891-109C	FILTER HEAD
7.	891-110C	FILTER ELEMENT SPIN ON
8.	811-091C	EL 3/4MJIC 1 1/16MORB
9.	811-269C	HH1/2R2 036 3/4FJIC
10.	401-834H	6 IN HYD FAN SHROUD
11.	800-120C	NUT CLIP U-TYPE 5/16-18
12.	810-804C	C12 HYD OIL COOLER
13.	802-159C	HHCS 5/16-18X1 GR5
14.	811-268C	HH1/2R2 048 3/4FJIC
15.	841-196C	HH1/2R2 024 3/4FJIC
16.	811-088C	AD 3/4MORB 3/4MJIC
17.	802-138C	HHCS 5/16-18X2 1/4 GR5
18.	810-813C	PRESSURE FLOW CONTROL VALVE
19.	411-824D	FLOW CONTROL MNT PLT NO FERT
20.	803-008C	NUT HEX 5/16-18 PLT
21.	804-009C	WASHER LOCK SPRING 5/16 PLT
22.	811-063C	EL 3/4MJIC 3/4MORB
23.	811-556C	HH3/8R2 085 3/4MORB 3/4MORB
24.	891-313C	CHAIN WELD 1/4 GR 43 X 24 LINK
25.	401-836H	PTO PUMP TORQUE ARM WLDMNT
26.	802-022C	HHCS 3/8-16X1 1/2 GR5
27.	804-013C	WASHER LOCK SPRING 3/8 PLT
28.	831-101C	PTO PUMP 3.6 CI/REV.
29.	891-314C	1/4 CHAIN THREADED LINK
30.	841-653C	EL 45 1 5/16MORB 1 5/16MJIC
31.	841-814C	EL 45 3/4MJIC 1 1/16MORB
32.	858-005C	DECAL DANGER PTO PUMP
33.	818-619C	DECAL HYD VALVE KNOB ADJUSTMNT
34.	858-003C	DECAL 5.5GAL OIL FILL LINE
35.	858-004C	DECAL HOT FLUID PTO RES
36.	818-130C	DECAL CAUTION 540 RPM

(Applies to YP425A, YP625A, YP825A only)

34426

YP425 PTO Hydraulic Pump Assembly with Liquid Fertilizer

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg34426	Image No.
1.	841-850C	HH1R4 198 1 5/16FJIC
2.	802-105C	HHCS 5/8-11X9 GR5
3.	804-022C	WASHER LOCK SPRING 5/8 PLT
4.	803-021C	NUT HEX 5/8-11 PLT
5.	841-653C	EL 45 1 5/16MORB 1 5/16MJIC
6.	401-841S	HYD RES TANK ASSY
7.	891-109C	FILTER HEAD
8.	891-110C	FILTER ELEMENT SPIN ON
9.	811-091C	EL 3/4MJIC 1 1/16MORB
10.	841-814C	EL 45 3/4MJIC 1 1/16MORB
11.	401-834H	6 IN HYD FAN SHROUD
12.	800-120C	NUT CLIP U-TYPE 5/16-18
13.	810-804C	C12 HYD OIL COOLER
14.	802-159C	HHCS 5/16-18X1 GR5
15.	811-268C	HH1/2R2 048 3/4FJIC
16.	811-059C	HH1/2R2 080 3/4FJIC
17.	811-073C	TE 3/4MJIC 3/4MJIC 3/4FJIC
18.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
19.	811-088C	AD 3/4MORB 3/4MJIC
20.	411-825D	FLOW CONTROL MNT PLT FERT
21.	803-014C	NUT HEX 3/8-16 PLT
22.	804-013C	WASHER LOCK SPRING 3/8 PLT
23.	802-138C	HHCS 5/16-18X2 1/4 GR5
24.	810-813C	PRESSURE FLOW CONTROL VALVE
25.	811-857C	PL 3/4MORB
26.	804-009C	WASHER LOCK SPRING 5/16 PLT
27.	803-008C	NUT HEX 5/16-18 PLT
28.	811-807C	HH1/2R2 120 3/4FJIC
29.	891-313C	CHAIN WELD 1/4 GR 43 X 24 LINK
30.	891-314C	1/4 CHAIN THREADED LINK
31.	401-836H	PTO PUMP TORQUE ARM WLDMNT
32.	802-022C	HHCS 3/8-16X1 1/2 GR5
33.	831-101C	PTO PUMP 3.6 CI/REV.
34.	858-005C	DECAL DANGER PTO PUMP
35.	818-619C	DECAL HYD VALVE KNOB ADJUSTMNT
36.	858-003C	DECAL 5.5GAL OIL FILL LINE
37.	858-004C	DECAL HOT FLUID PTO RES
38.	818-130C	DECAL CAUTION 540 RPM

Comments

Revision

YP625A and YP825A PTO Hydraulic Pump Assembly with Liquid Fertilizer

(Applies to YP425A, YP625A, YP825A only)

34427

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg34427	Image No.
1.	841-848C	HH1R4 144 1 5/16FJIC
2.	803-020C	NUT HEX 1/2-13 PLT
3.	804-015C	WASHER LOCK SPRING 1/2 PLT
4.	802-047C	HHCS 1/2-13X6 GR5
5.	401-843S	HYD RES FERT FRAME MNT ASSY
6.	891-109C	FILTER HEAD
7.	891-110C	FILTER ELEMENT SPIN ON
8.	811-091C	EL 3/4MJIC 1 1/16MORB
9.	811-773C	HH1/2R2 066 3/4FJIC
10.	401-834H	6 IN HYD FAN SHROUD
11.	800-120C	NUT CLIP U-TYPE 5/16-18
12.	810-804C	C12 HYD OIL COOLER
13.	802-159C	HHCS 5/16-18X1 GR5
14.	811-268C	HH1/2R2 048 3/4FJIC
15.	811-059C	HH1/2R2 080 3/4FJIC
16.	811-073C	TE 3/4MJIC 3/4MJIC 3/4FJIC
17.	811-088C	AD 3/4MORB 3/4MJIC
18.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
19.	411-825D	FLOW CONTROL MNT PLT FERT
20.	804-013C	WASHER LOCK SPRING 3/8 PLT
21.	803-014C	NUT HEX 3/8-16 PLT
22.	803-008C	NUT HEX 5/16-18 PLT
23.	804-009C	WASHER LOCK SPRING 5/16 PLT
24.	811-857C	PL 3/4MORB
25.	802-138C	HHCS 5/16-18X2 1/4 GR5
26.	810-813C	PRESSURE FLOW CONTROL VALVE
27.	811-807C	HH1/2R2 120 3/4FJIC
28.	891-313C	CHAIN WELD 1/4 GR 43 X 24 LINK
29.	891-314C	1/4 CHAIN THREADED LINK
30.	401-836H	PTO PUMP TORQUE ARM WLDMNT
31.	802-022C	HHCS 3/8-16X1 1/2 GR5
32.	831-101C	PTO PUMP 3.6 CI/REV.
33.	841-814C	EL 45 3/4MJIC 1 1/16MORB
34.	841-653C	EL 45 1 5/16MORB 1 5/16MJIC
35.	858-005C	DECAL DANGER PTO PUMP
36.	818-619C	DECAL HYD VALVE KNOB ADJUSTMNT
37.	858-003C	DECAL 5.5GAL OIL FILL LINE
38.	858-004C	DECAL HOT FLUID PTO RES
39.	818-130C	DECAL CAUTION 540 RPM

Marker Hydraulics

(Applies to YP425A, YP625A, YP825A only)

29940

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg29940	Image No.
1.	401-648H	4-30 MAIN FRAME WELDMENT
i.	401-649H	6-30 MAIN FRAME WELDMENT
i.	401-650H	8-30 MAIN FRAME WELDMENT
2.	810-196C	CYL 2.5X10X1.12 ROD (TIE)
3.	811-065C	EL 9/16MJIC 9/16MORB
4.	841-171C	HH1/4R2 075 9/16FJIC
4.	841-469C	HH1/4R2 102 9/16FJIC
4.	841-124C	HH 1/4 R2 141 9/16FJIC
5.	841-374C	HH1/4R2 085 9/16FJIC
5.	841-397C	HH1/4R2 115 9/16FJIC
5.	841-125C	HH 1/4 R2 128 9/16FJIC
5.	811-494C	HH1/4R1 190 9/16FJIC
6.	811-147C	CR 3/4MJIC
7.	811-287C	HH3/8R2 030 3/4FJIC 9/16FJIC
8.	802-014C	HHCS 3/8-16X3/4 GR5
9.	804-013C	WASHER LOCK SPRING 3/8 PLT
10.	411-642D	MOUNT, SEQUENCE VALVE
11.	810-197C	VALVE,SEQUENCE SHOEMAKER
12.	803-006C	NUT HEX 1/4-20 PLT
13.	804-006C	WASHER LOCK SPRING 1/4 PLT
14.	804-007C	WASHER FLAT 1/4 SAE PLT
15.	802-224C	HHCS 1/4-20X1 1/4 GR5
16.	811-150C	EL 3/4FJIC 3/4MJIC
17.	811-078C	TE 3/4MJIC
18.	811-133C	AD 9/16MJIC 3/4MORB
19.	810-345C	VALVE 90 DEGREE SHUT-OFF
20.	841-204C	AD 9/16FJIC 3/4MORB

Comments Revision

Used with 4 Row Used with 6 Row Used with 8 Row

Refer to Marker Midway Hydraulic Cylinder (810-196C) for breakdown

Used with 4 Row

Used with 6 Row & 4 Row wide

Used with 8 Row & 6 Row wide

Used with 4 Row

Used with 6 Row & 4 Row wide

Used with 8 Row & 6 Row wide

Used with 8 Row wide

Used with 6 & 8 row

Refer to Marker Sequence Valve (810-197C) for breakdown

Used with 4, 6 & 8 row Used with 4 row

(Applies to YP425A, YP625A, YP825A only)

31842

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg31842	Image No.
1.	811-826C	HG HANDLE - BLACK EXT
i.	811-914C	HG HANDLE - RED EXT
i.	811-915C	HG HANDLE - GREEN EXT
i.	811-917C	HG HANDLE - YELLOW EXT
1.	841-540C	HG HANDLE - GRAY EXT
1.	841-542C	HG HANDLE - BLUE EXT
2.	811-913C	HG HANDLE - BLACK RET
2.	811-827C	HG HANDLE - RED RET
2.	811-916C	HG HANDLE - GREEN RET
2.	811-918C	HG HANDLE - YELLOW RET
2.	841-541C	HG HANDLE - GRAY RET
2.	841-543C	HG HANDLE - BLUE RET
3.	811-919C	AD 3/4MORB 3/4FORB (HG)

Comments Revision

Used on frame lift cylinders.

Used on hydraulic level Used on wing fold cylinders Used on Hydraulic Drive.

Used on fold cylinders.

Used on cast roller depth control.

Used on frame lift cylinders.

Used on hydraulic level.

Used on wing fold cylinders.

Used on Hydraulic Drive.

Used on fold cylinders.

Used on cast roller depth control

(Applies to YP425A, YP625A, YP825A only)

15498

Energy Hydraulic Cylinder (810-304C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments		Revision
	dwg15498	Image No.
1.	18467B	ROD 1.750 DIA W/C
2.	14679B	SPANNER NUT 0.375 X 4.000 OD
3.		EGY WIPER RING	Only found in item	15.
4.		EGY UCUP	Only found in item	15.
5.	15044C	EGY GUIDE
6.		EGY RETAINING RING	Only found in item	15.
7.		EGY BACKUP RING	Only found in item	15.
8.		EGY O-RING	Only found in item	15.
9.	31881B	EGY PISTON
10.		EGY O-RING	Only found in item	15.
11.		EGY O-RING	Only found in item	15.
12.		EGY PISTON SEAL	Only found in item	15.
13.	82598	EGY LOCK NUT
14.	31882D	EGY CYLINDER BODY
15.	810-328C	SEAL KIT ENERGY 3.5 REPHASE
16.	20875A	WEAR RING 3.00 ODX0.250X0.125

(Applies to YP425A, YP625A, YP825A only)

15498

Energy Hydraulic Cylinder (810-305C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments		Revision
	dwg15498	Image No.
1.	18503B	ROD 1.500 DIA W/C
2.	14678A	EGY SPANNER NUT
3.		EGY WIPER RING	Only found in item	15.
4.		EGY UCUP	Only found in item	15.
5.	15338C	EGY GUIDE
6.		EGY RETAINING RING	Only found in item	15.
7.		EGY BACKUP RING	Only found in item	15.
8.		EGY O-RING	Only found in item	15.
9.	25748A	EGY PISTON
10.		EGY O-RING	Only found in item	15.
11.		EGY O-RING	Only found in item	15.
12.		EGY PISTON SEAL	Only found in item	15.
13.	82464	EGY 7/8-14UNF REG HEX LOCK NUT
14.	31874D	EGY CYLINDER BODY
15.	810-327C	SEAL KIT ENERGY 3.0 REPHASE
16.	15586A	WEAR RING 3.00 ODX0.250X0.125

(Applies to YP425A, YP625A, YP825A only)

15499

Energy Hydraulic Cylinder (810-306C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg15499	Image No.
1.	18492B	ROD 1.50 DIA W/C
2.		EGY WIPER RING	Only found in item 14.
3.	14677A	EGY SPANNER NUT
4.		EGY UCUP	Only found in item 14.
5.	15342B	EGY GUIDE
6.		EGY RETAINING RING	Only found in item 14.
7.		EGY BACKUP RING	Only found in item 14.
8.		EGY O-RING	Only found in item 14.
9.	15323B	EGY PISTON
10.		EGY O-RING	Only found in item 14.
11.		EGY PISTON SEAL	Only found in item 14.
12.	82464	EGY 7/8-14UNF REG HEX LOCK NUT
13.	18487D	EGY CYLINDER BODY
14.	810-326C	SEAL KIT ENERGY 2.5
15.	15586A	WEAR RING 3.00 ODX0.250X0.125

(Applies to YP425A, YP625A, YP825A only)

31888

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments				Revision
	dwg31888	Image No.
1.	1GP3794-ADI	810-822C ROD EYE MACH
2.	803-234C	NUT HEX 3/8-16 PLAIN
3.	802-023C	HHCS 3/8-16X1 3/4 GR5
4.	2M5795NC	MIDWAY ROD
5.		MIDWAY ROD WIPER	Only Available	in	item	20
6.		MW U-CUP	Only Available	in	item	20
7.	2A0016	MW TIE ROD NUT
8.	3GP3806	810-822C TRUNNION MACH
9.		BACK-UP MIDWAY	Only Available	in	item	20
10.		O-RING MIDWAY	Only Available	in	item	20
11.		MIDWAY PISTON SEAL	Only Available	in	item	20
12.		LOADER	Only Available	in	item	20
13.	4R3109	PISTON MIDWAY
14.	2A0024	MW PISTON NUT 1-14
15.		MW PISTON NUT SEAL	Only Available	in	item	20
16.		WEAR RING MIDWAY	Only Available	in	item	20
17.	7M5424	MIDWAY ROD
18.	5R3188	MIDWAY TUBE
19.	6GP3816	810-822C BASE MACH
20.	810-719C	810-222C SEAL REPAIR KIT

(Applies to YP425A, YP625A, YP825A only)

31889

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments				Revision
	dwg31889	Image No.
1.	1GP3794-ADI	810-822C ROD EYE MACH
2.	803-234C	NUT HEX 3/8-16 PLAIN
3.	802-023C	HHCS 3/8-16X1 3/4 GR5
4.	2M4630NC	MW ROD
5.		MW WIPER	Only Available	in	item	20
6.		MW U-CUP	Only Available	in	item	20
7.	2A0014	MW TIE ROD NUT
8.	3GP3836	810-822C TRUNNION MACH
9.		BACK-UP MIDWAY	Only Available	in	item	20
10.		O-RING MIDWAY	Only Available	in	item	20
11.		TEFLON SEAL	Only Available	in	item	20
12.		LOADER	Only Available	in	item	20
13.	4R1109	PISTON MIDWAY
14.	2A0024	MW PISTON NUT 1-14
15.		MW PISTON NUT SEAL	Only Available	in	item	20
16.		WEAR RING MIDWAY	Only Available	in	item	20
17.	7M4424	MIDWAY TIE ROD
18.	5R1188	MIDWAY TUBE
19.	6GP3846	810-823C BASE MACH
20.	810-720C	810-823 SEAL REPAIR KIT

(Applies to YP425A, YP625A, YP825A only)

31890

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments		Revision
	dwg31890	Image No.
1.	1GP3794-ADI	810-822C ROD EYE MACH
2.	803-234C	NUT HEX 3/8-16 PLAIN
3.	802-023C	HHCS 3/8-16X1 3/4 GR5
4.	2M3550NC	MIDWAY ROD
5.		MW WIPER	Only Available in item	7
6.		U-CUP	Only Available in item	7
7.	810-721C	810-824C SEAL REPAIR KIT
8.	3GP3866	810-824C TRUNNION MACH
9.		SEAL KIT MW 2.5 CYL 3A3102	Only Available in item	7
10.		SEAL KIT MW 2.5 CYL 3A3102	Only Available in item	7
11.		CROWN SEAL MIDWAY	Only Available in item	7
12.		SEAL KIT MW 2.5 CYL 3A3102	Only Available in item	7
13.	4M3108	MW PISTON
14.	803-114C	NUT LOCK 3/4-16 NYLOC COLLAR
15.	7M3428	MIDWAY TIE ROD
16.	5M3228	MIDWAY TUBE
17.	6GP3876	810-824C BASE MACH

Marker Midway Hydraulic Cylinder (810-196C)

(Applies to YP425A, YP625A, YP825A only)

12027

Marker Midway Hydraulic Cylinder (810-196C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg12027	Image No.
1.	2A0022	RPBY 803-114C
2.	4M3102	RPBY 4M3108
3.		BACK-UP	Only found in item 15
4.		O-RING	Only found in item 15
5.	3R0310	MW HEAD
6.	2A0012	RPBY 803-234C
7.		O-RING	Only found in item 15
8.		BACK-UP	Only found in item 15
9.		WIPER SEAL	Only found in item 15
10.	2M3393	MW ROD
11.	5M3118	MW TUBE
12.	7M3318	MW TIE ROD
13.	6R0154	BASE MIDWAY
14.	2A0126	MW PLUG
15.	810-210C	SEAL KIT MW 2.5 CYL 3A3102

Table of Contents Part Number Index Marker Sequence Valve (810-197C)

(Applies to YP425A, YP625A, YP825A only)

12024

Table of Contents Part Number Index Marker Sequence Valve (810-197C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg12024	Image No.
1.	3089	SHOEMAKER BODY MKR SEQ VALVE
2.	1088-908	SHOEMAKER O-RING
3.	1132-08	SHOEMAKER PLUG, HEX SOCKET
4.	1179	SHOEMAKER NEEDLE,FLOW CONTROL
5.	1217	SHOEMAKER .125 SPRING PIN
6.	1211	SHOEMAKER SPRING COMPRESSION
7.	1100-011	RPBY SEAL KIT
7.	1088-011	RPBY 1100-011
8.	1089-011	RPBY SEAL KIT
9.	1180	SHOEMAKER SCREW, FLOW CON.ADJ.
10.	1218	SHOEMAKER HEX, JAM NUT Z PLTD.
11.	1099	RPBY SEAL KIT
12.	1087-250	RPBY SEAL KIT
13.	1087-437	RPBY SEAL KIT
14.	1042	RPBY SEAL KIT
15.	1088-906	SHOEMAKER O-RING
16.	1182	SHOEMAKER FITTING PORT ADPT.
17.	1132-05	SHOEMAKER HEX,SKT O-RING PLUG
18.	1088-905	SHOEMAKER O-RING
19.	1092-6-6	SHOEMAKER SAE #6 TO #6 STRGHT
19.	1092-6	RPBY 1092-6-6
20.	2153	SHOEMAKER SPOOL,MKR SEQ. .055
	810-456C	SEAL KIT SHOEMAKER #1223	Not shown

29902

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg29902 829-048C	Image No. VALVE - 1 1/2FNPT X 2FCL POLYP
2.	830-324C	AD 1 1/2 FLG X 1 1/2 MNPT POLY
3.	830-351C	CLAMP 2" BANJO FLANGE
4.	814-161C	LAM 4X8 TR-WL-HUB-YOKE 25 SER.
5.	830-387C	EL 1 1/2 FLANGE 45 DEG POLY
6.	830-345C	AD 2"FLANGE X 1 1/2 HB
7.	800-125C	CLAMP WRM DRV#28 SS(1.31-2.25)
8.	990-181R	HOSE 1 1/2 ID 150PSI EPDM
9.	830-325C	EL 1 1/2 FLANGE X 1 1/2HB POLY
10.	829-126C	VALVE 1 1/2 MANI 3 WAY BALL
11.	831-078C	STRAINER BANJO MLST150-80 MESH
12.	830-385C	EL 1 1/2 FLANGE X 1HB POLY
13.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
14.	990-082R	HOSE 1 ID 200PSI EPDM
15.	816-467C	GASKET 1 MANIFOLD M100G EPDM
16.	830-327C	CLAMP 1 BANJO FLANGE
17.	830-389C	AD 1 FLANGE X 1 MNPT POLY
18.	831-077C	PUMP, CDS-JOHN BLUE LM-1255
19.	803-020C	NUT HEX 1/2-13 PLT
20.	804-015C	WASHER LOCK SPRING 1/2 PLT
21.	804-017C	WASHER FLAT 1/2 USS PLT
22.	817-456C	IDLER SPOOL #50 2.38X1.01X1.31
23.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
24.	803-068C	NUT HEX FLANGE 3/8-16 PLT
25.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
26.	407-388D	IDLER SPKT MOUNT PLATE
27.	802-017C	HHCS 3/8-16X1 GR5
28.	802-041C	HHCS 1/2-13X3 1/2 GR5
29.	407-386D	YP4-6-8 FERT PUMP MOUNT PLATE
30.	804-013C	WASHER LOCK SPRING 3/8 PLT
31.	802-159C	HHCS 5/16-18X1 GR5
32.	407-515D	BRACKET 1 1/2 VALVE SUPPORT
33.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
34.	803-195C	NUT HEX 3/8-16 SS
35.	502-174D	ANGLE - 1 1/2 B VALVE SUPPORT
36.	802-007C	HHCS 5/16-18X3/4 GR5
37.	848-555C	DECAL VALVE SELECTOR
38.	830-052C	EL 1 1/2MNPT X 1 1/2FNPT POLYP

Refer to Cam Lock Ball Valve (829-048C) for Breakdown

Refer to 1 1/2 Mani 3 Way Ball Valve (829-126C) for breakdown Refer to Banjo Strainer (831-078C) for Breakdown

Refer to John-Blue Pump (831-077C) for Breakdown

(Applies to YP425A, YP625A, YP825A only)

31744

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg31744 805-010C	Image No. PIN HAIR COTTER .094
2.	502-060D	DUST PLUG CHAIN 10
3.	830-186C	PL 2MCL POLY-GLASS
4.	407-649D	FERT PUMP PLUMBING MOUNT
5.	802-017C	HHCS 3/8-16X1 GR5
6.	803-008C	NUT HEX 5/16-18 PLT
7.	804-009C	WASHER LOCK SPRING 5/16 PLT
8.	804-036C	WASHER FLAT 5/16 SAE PLT
9.	804-014C	WASHER LOCK 7/16 PLT
10.	803-014C	NUT HEX 3/8-16 PLT
11.	848-555C	DECAL VALVE SELECTOR
12.	829-107C	2" VALVE GASKET
13.	803-195C	NUT HEX 3/8-16 SS
14.	502-174D	ANGLE - 1 1/2 B VALVE SUPPORT
15.	802-007C	HHCS 5/16-18X3/4 GR5
16.	829-048C	VALVE - 1 1/2FNPT X 2FCL POLYP	Refer to Cam Lock Valve (829-048C)
17.	830-324C	AD 1 1/2 FLG X 1 1/2 MNPT POLY	for breakdown
18.	816-161C	GASKET 1 1/2 CAM-LOCK CP EPDM
19.	830-351C	CLAMP 2" BANJO FLANGE
20.	829-126C	VALVE 1 1/2 MANI 3 WAY BALL	Refer to 1 1/2 Mani 3 Way Ball Valve
21.	831-078C	STRAINER BANJO MLST150-80 MESH	(829-126C) for breakdown Refer to Banjo Strainer (831-078C) for
22.	830-155C	EL 1 1/2 FLANGE POLY	breakdown
23.	830-325C	EL 1 1/2 FLANGE X 1 1/2HB POLY
24.	800-125C	CLAMP WRM DRV#28 SS(1.31-2.25)
25.	990-181R	HOSE 1 1/2 ID 150PSI EPDM
26.	830-052C	EL 1 1/2MNPT X 1 1/2FNPT POLYP
27.	830-385C	EL 1 1/2 FLANGE X 1HB POLY
28.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
29.	990-082R	HOSE 1 ID 200PSI EPDM
30.	830-385C	EL 1 1/2 FLANGE X 1HB POLY
31.	816-467C	GASKET 1 MANIFOLD M100G EPDM
32.	830-327C	CLAMP 1 BANJO FLANGE
33.	830-389C	AD 1 FLANGE X 1 MNPT POLY
34.	831-110C	PUMP, CDS-JOHN BLUE NGP-4055-F	Refer to John-Blue Pump (831-110C)
			for breakdown

Liquid Fertilizer Plumbing 6 and 8 Row (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

29941

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg29941 829-048C	Image No. VALVE - 1 1/2FNPT X 2FCL POLYP
2.	830-324C	AD 1 1/2 FLG X 1 1/2 MNPT POLY
3.	830-351C	CLAMP 2" BANJO FLANGE
4.	816-161C	GASKET 1 1/2 CAM-LOCK CP EPDM
5.	830-387C	EL 1 1/2 FLANGE 45 DEG POLY
6.	830-345C	AD 2"FLANGE X 1 1/2 HB
7.	800-125C	CLAMP WRM DRV#28 SS(1.31-2.25)
8.	990-181R	HOSE 1 1/2 ID 150PSI EPDM
9.	829-126C	VALVE 1 1/2 MANI 3 WAY BALL
10.	830-329C	TEE 1 1/2 FLANGE POLY
11.	830-270C	AD 1 1/2 FLANGE COUPLER M200
12.	830-325C	EL 1 1/2 FLANGE X 1 1/2HB POLY
13.	831-078C	STRAINER BANJO MLST150-80 MESH
14.	830-385C	EL 1 1/2 FLANGE X 1HB POLY
15.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
16.	990-082R	HOSE 1 ID 200PSI EPDM
17.	816-467C	GASKET 1 MANIFOLD M100G EPDM
18.	830-327C	CLAMP 1 BANJO FLANGE
19.	830-389C	AD 1 FLANGE X 1 MNPT POLY
20.	831-077C	PUMP, CDS-JOHN BLUE LM-1255
21.	407-386D	YP4-6-8 FERT PUMP MOUNT PLATE
22.	802-159C	HHCS 5/16-18X1 GR5
23.	804-013C	WASHER LOCK SPRING 3/8 PLT
24.	803-068C	NUT HEX FLANGE 3/8-16 PLT
25.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
26.	803-195C	NUT HEX 3/8-16 SS
27.	407-515D	BRACKET 1 1/2 VALVE SUPPORT
28.	502-174D	ANGLE - 1 1/2 B VALVE SUPPORT
29.	803-020C	NUT HEX 1/2-13 PLT
30.	804-015C	WASHER LOCK SPRING 1/2 PLT
31.	804-017C	WASHER FLAT 1/2 USS PLT
32.	817-456C	IDLER SPOOL #50 2.38X1.01X1.31
33.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
34.	802-007C	HHCS 5/16-18X3/4 GR5
35.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
36.	407-388D	IDLER SPKT MOUNT PLATE
37.	802-041C	HHCS 1/2-13X3 1/2 GR5
38.	802-017C	HHCS 3/8-16X1 GR5
39.	848-555C	DECAL VALVE SELECTOR

Refer to Cam Lock Ball Valve (829-048C) for breakdown

Refer to 1 1/2 Mani 3 Way Ball Valve (829-126C) for breakdown

Refer to Banjo Strainer (831-078C) for Breakdown

Refer to John-Blue Pump (831-077C) for Breakdown

31745

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg 31745	Image No.
1.	805-010C	PIN HAIR COTTER .094
2.	502-060D	DUST PLUG CHAIN 10
3.	830-186C	PL 2MCL POLY-GLASS
4.	407-649D	FERT PUMP PLUMBING MOUNT
5.	802-017C	HHCS 3/8-16X1 GR5
6.	804-009C	WASHER LOCK SPRING 5/16 PLT
7.	803-008C	NUT HEX 5/16-18 PLT
8.	804-014C	WASHER LOCK 7/16 PLT
9.	803-014C	NUT HEX 3/8-16 PLT
10.	804-036C	WASHER FLAT 5/16 SAE PLT
11.	848-555C	DECAL VALVE SELECTOR
12.	803-195C	NUT HEX 3/8-16 SS
13.	829-107C	2" VALVE GASKET
14.	502-174D	ANGLE - 1 1/2 B VALVE SUPPORT
15.	802-007C	HHCS 5/16-18X3/4 GR5
16.	829-048C	VALVE - 1 1/2FNPT X 2FCL POLYP	Refer to cam Lock Ball Valve
			(829-126C) for breakdown
17.	830-324C	AD 1 1/2 FLG X 1 1/2 MNPT POLY
18.	816-161C	GASKET 1 1/2 CAM-LOCK CP EPDM
19.	830-351C	CLAMP 2" BANJO FLANGE
20.	829-126C	VALVE 1 1/2 MANI 3 WAY BALL	Refer to 1 1/2 Mani 3 Way Ball Valve (829-126C) for breakdown
21.	830-325C	EL 1 1/2 FLANGE X 1 1/2HB POLY
22.	800-125C	CLAMP WRM DRV#28 SS(1.31-2.25)
23.	990-181R	HOSE 1 1/2 ID 150PSI EPDM
24.	830-345C	AD 2"FLANGE X 1 1/2 HB
25.	831-078C	STRAINER BANJO MLST150-80 MESH	Refer to Banjo Strainer (831-078C) for
			breakdown
26.	830-385C	EL 1 1/2 FLANGE X 1HB POLY
27.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
28.	990-082R	HOSE 1 ID 200PSI EPDM
29.	830-329C	TEE 1 1/2 FLANGE POLY
30.	831-110C	PUMP, CDS-JOHN BLUE NGP-4055-F	Refer to John-Blue Pump (831-110C)

for breakdown

(Applies to YP425A, YP625A, YP825A only)

29942

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg29942	Image No.
1.	407-257H	FERT BAR WELD 4-30
2.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
3.	990-082R	HOSE 1 ID 200PSI EPDM
4.	831-110C	PUMP, CDS-JOHN BLUE NGP-4055-F
5.	830-061C	CA 3/4FNPT POLYPROP
6.	829-089C	NOZZLE BODY 3/4 WET BOOM CLAMP
7.	803-088C	NUT HEX LOCK 1/4-20 FLG
8.	407-137D	FERTILIZER BOOM MOUNT
9.	803-008C	NUT HEX 5/16-18 PLT
10.	804-009C	WASHER LOCK SPRING 5/16 PLT
11.	802-159C	HHCS 5/16-18X1 GR5
12.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
13.	407-389D	WET BOOM U-BOLT PLATE
14.	803-068C	NUT HEX FLANGE 3/8-16 PLT
15.	806-152C	U-BOLT 1/4-20 X 1.125 X 2 RND
16.	990-109R	TUBE NYLON 1/4OD X 062WL
17.	830-383C	CP 1/4 PUSH LOK POLY
18.	407-134D	MANIFOLD 40 FT TWIN ROW
19.	830-086C	AD 1MNPT X 3/4HB POLYPROP
20.	830-127C	EL 1MNPT X 1HB POLYPROP
21.	829-104C	GAUGE 100 PSI 4IN STAINLESS ST
22.	507-034V	GAUGE PROTECTOR ASSY
23.	830-192C	AD 1/4MNPT CLOSE X 7/8 SS
24.	830-258C	AD 1MNPT X 1/4FNPT POLYPROP
25.	830-237C	CR 1FNPT
26.	890-521C	MUFFLER CLAMP 1.63 SIZE
27.	803-199C	NUT HEX FLANGE 5/16-18 PLT
28.	401-528D	AIR TUBE SUPPORT CLAMP
29.	829-105C	VALVE RELIEF 0-150 PSI POLYP
30.	830-121C	EL 3/4MNPT X 3/8HB POLYPROP
31.	990-080R	HOSE 3/8 ID 150PSI EPDM
32.	830-065C	EL 3/4FNPT X 3/4HB POLYPROP
33.	407-001H	FERT BAR WELD
34.	407-140D	MANIFOLD 30 FOOT TWIN ROW
35.	830-123C	EL 3/4MNPT X 3/4HB POLYPROP
36.	830-028C	TEE 3/4FNPT POLYPROP
37.	407-012H	FERT BAR 8-30 WELD
38.	801-071C	SRHMS 5-40X5/8 SS
39.	507-040D	GAUGE PROTECTOR TOP
40.	816-144C	DIAPHRAGM - GAUGE PROTECTOR
41.	507-039D	GAUGE PROTECTOR BOTTOM
42.	818-344C	DECAL NOTICE GAUGE PROTECTOR
43.	990-081R	HOSE 3/4 ID 200PSI EPDM
44.	832-052C	ORIFICE SPR SYS CP4916-20 SS
44.	832-053C	ORIFICE SPR SYS CP4916-34 SS
44.	832-054C	ORIFICE SPR SYS CP4916-48 SS
44.	832-055C	ORIFICE SPR SYS CP4916-80 SS
44.	832-056C	ORIFICE SPR SYS CP4916-28 SS
44.	832-057C	ORIFICE SPR SYS CP4916-59 SS
44.	832-059C	ORIFICE SPR SYS CP4916-98
45.	832-042C	NOZZLE SHUT OFF CAP W/ GASKET
46.	832-051C	NOZZLE CAP QUICK X 90X1/4 FNPT
47.	800-367C	AD PUSH 1/4TUBEX1/4MNPT
48.	CP18999-EPR	ORIFICE SEAT STYLE GASKET
49.	407-914D	WET BOOM SUPPORT BAR
50.	830-142C	AD 1MNPT X 3/4FNPT POLYPROP

Comments

Used with 4 Row only

Includes Items 38-42

Used with 6 Row only

Used with 8 Row only

Revision

Refer to John-Blue Pump (831-110C) for breakdown

(Applies to YP425A, YP625A, YP825A only)

Rf Part No. Part Description Comments Revision

51. 407-924D WET BOOM SUPPORT SPACER

(Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

Liquid Fertilizer Pump Mounting (YP425A S/N B1008N-) (YP625A S/N B1043Q-)

29908

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

	dwg29908	Image No.
1.	802-159C	HHCS 5/16-18X1 GR5
2.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
3.	802-022C	HHCS 3/8-16X1 1/2 GR5
4.	804-011C	WASHER FLAT 3/8 USS PLT
5.	407-386D	YP4-6-8 FERT PUMP MOUNT PLATE
6.	804-013C	WASHER LOCK SPRING 3/8 PLT
7.	803-014C	NUT HEX 3/8-16 PLT
8.	831-077C	PUMP, CDS-JOHN BLUE LM-1255
9.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
10.	A-147	JOHN-BLUE PUMP LEG MOUNT PAD
11.	106532-01	SPKT - JOHN-BLUE PUMP LM-1255
12.	L-1020	SETTING ARM KEY LM-1255 PUMP
13.	801-112C	SCREW SET SCKT HD 3/8-16 X 1
14.	402-022H	SPRKT STORAGE WELD
15.	808-148C	SPKT 40C17 X 7/8 HEX BORE
16.	808-155C	SPKT 40C28 X 7/8 HEX BORE
17.	808-154C	SPKT 40C27 X 7/8 HEX BORE
18.	808-153C	SPKT 40C26 X 7/8 HEX BORE
19.	808-152C	SPKT 40C25 X 7/8 HEX BORE
20.	808-151C	SPKT 40C24 X 7/8 HEX BORE
21.	808-149C	SPKT 40C19 X 7/8 HEX BORE
22.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4
23.	402-021S	SPRKT STORAGE ASSY

Refer to John-Blue Pump (831-077C) for Breakdown

31731

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg31731 806-139C	Image No. U-BOLT 1/2-13 CORNER 5 X 7
2.	803-169C	NUT HEX FLG LOCK 1/2-13 PLT
3.	804-017C	WASHER FLAT 1/2 USS PLT
4.	407-641D	TUBE RND 1 OD X 7/32WL X 2.75
5.	817-406C	IDLER 1 PC 2.38X1.01X1.062
6.	802-044C	HHCS 1/2-13X4 GR5
7.	803-147C	NUT HEX NYLOCK 1/2-13
8.	802-042C	HHCS 1/2-13X3 3/4 GR5
9.	817-025C	NO. 40 12T IDLER SPKT
10.	803-036C	NUT HEX JAM 1/2-13 PLT
11.	803-020C	NUT HEX 1/2-13 PLT
12.	808-062C	SPKT 40B15 X 1 B W/KW & SS
13.	123-004D	KEY 1/4 X 1
14.	831-110C	PUMP, CDS-JOHN BLUE NGP-4055-F	Refer to John Blue Pump (831-110C)
15.	802-022C	HHCS 3/8-16X1 1/2 GR5	for breakdown
16.	804-011C	WASHER FLAT 3/8 USS PLT
17.	803-086C	NUT MAC-LOK FLG 3/8-16 GR F
18.	805-240C	PIN LINCH 3/16 X 1 9/16 LONG
19.	808-147C	SPKT 40C15 X 7/8 HEX BORE

Liquid Fertilizer Drive (YP425A S/N B1008N-) (YP625A S/N B1043Q-) (YP825A S/N B1014S-)

(Applies to YP425A, YP625A, YP825A only)

31721

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

1.	dwg31721 402-574D	Image No. TRANSFER HEX SHAFT 4-ROW
1.	402-565D	TRANSFER HEX SHAFT 6-ROW
1.	402-579D	TRANSFER HEX SHAFT 8-ROW
1.	402-615D	TRANSFER HEX SHAFT 8-ROW WIDE
2.	802-041C	HHCS 1/2-13X3 1/2 GR5
3.	817-406C	IDLER 1 PC 2.38X1.01X1.062
4.	120-306D	TUBE RND 1 OD X 7/32W X 2.13
5.	804-017C	WASHER FLAT 1/2 USS PLT
6.	808-251C	SPKT 40C36 X 7/8 HEX BORE
7.	136-060D	CHAIN RL #40 61 PITCHES
8.	136-271D	CHAIN RL #50 60 PITCHES
9.	402-025S	LOCK COLLAR, 7/8 HEX W/ SET SC
10.	808-149C	SPKT 40C19 X 7/8 HEX BORE
11.	804-013C	WASHER LOCK SPRING 3/8 PLT
12.	803-014C	NUT HEX 3/8-16 PLT
13.	803-008C	NUT HEX 5/16-18 PLT
14.	804-009C	WASHER LOCK SPRING 5/16 PLT
15.	804-010C	WASHER FLAT 5/16 USS PLT
16.	407-308D	FERTILIZER CASE
17.	822-032C	FLANGETTE 52 MST
18.	822-119C	BRG 7/8HEXX2.05OD SPH
19.	802-282C	RHSNB 5/16-18X1 GR5
20.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
21.	136-178D	CHAIN RL #50 88 PITCHES
22.	808-314C	SPKT 50C44 X 7/8 HEX BORE
23.	805-126C	PIN LINCH 1/4 X 1 3/4 PLT
24.	407-384D	YP4-6-8 FERT TRANS DRIVE SHAFT
25.	817-423C	NO. 50 12T IDLER SPKT
26.	802-079C	HHCS 3/8-16X1 1/4 GR5
27.	402-319H	DOUBLE IDLER WELDMENT
28.	808-304C	SPKT 50C19 X 7/8 HEX BORE
29.	806-150C	U-BOLT 3/8-16 X 7 1/32 X 6 GR5
30.	407-385D	YP4-6-8 WET FERT TRANS SHAFT
30.	407-532D	YP425 DRY FERT TRANS SHAFT WD
30.	407-531D	YP625 DRY FERT TRANS SHAFT WD
30.	407-540D	YP825 DRY FERT TRANS SHAFT WD
31.	803-199C	NUT HEX FLANGE 5/16-18 PLT
32.	822-175C	FLANGETTE 52 3-BOLT PLT
33.	802-091C	HHCS 1/2-13X1 1/2 GR5
34.	407-146D	SHAFT SUPPORT FRAME BRACKET
35.	407-147D	ADJUSTABLE SHAFT SUPPORT
36.	802-092C	RHSNB 5/16-18X3/4 GR5
37.	804-015C	WASHER LOCK SPRING 1/2 PLT
38.	803-020C	NUT HEX 1/2-13 PLT
39.	804-016C	WASHER FLAT 1/2 SAE PLT
40.	804-011C	WASHER FLAT 3/8 USS PLT
41.	802-022C	HHCS 3/8-16X1 1/2 GR5
42.	805-064C	PIN COTTER 7/64 X 1 LONG
43.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
44.	402-567D	TRANSFER SHAFT SUPPORT

Comments Revision

Used on 4 Row Used on 6 Row & 4 Row wide Used on 8 Row & 6 Row wide Used on 8 Row wide

31725

(Applies to YP425A, YP625A, YP825A only) Rl Part No. Part Description

Comments

Revision

1.	dwg31725 407-642D	Image No. DRIVE WHEEL ARM GUARD
2.	802-167C	HHCS 1/4-20X1 1/2 GR5
3.	804-006C	WASHER LOCK SPRING 1/4 PLT
4.	802-005C	HHCS 1/4-20X1 GR5
5.	803-020C	NUT HEX 1/2-13 PLT
6.	804-015C	WASHER LOCK SPRING 1/2 PLT
7.	407-524H	FERT DRIVE SPKT WELD 40C20
8.	822-033C	BRG CUP LM-48510
9.	407-635D	4BOLT HUB TAPPERED ROL BRG
10.	407-520V	4 BOLT HUB & BRG SUB ASY
11.	822-259C	BRG, DUO-FACE W/SEAL LM48500LA
12.	800-001C	GREASE ZERK STRAIGHT 1/4-28
13.	407-521S	4BOLT HUB ASY TAPPERED ROL BRG
14.	805-177C	PIN ROLL 5/16 X 1 3/4 PLT
15.	802-331C	RHSNB 1/2-13X1 3/4 GR5
16.	407-639D	FERT DRIVE SPACER
17.	407-519E	FERT G.W SPINDLE WELD
18.	802-104C	BOLT WHEEL 1/2-20X1 90-DEG
19.	816-035C	VALVE STEM TR415X.625X1 1/4 LG
20.	814-116C	WHEEL 15 DIAX4 1/2 WIDEX4 BLT
20.	814-552C	WHEEL 15DIAX4.5WIDE 4 BLT BKSN
21.	814-115C	TIRE 5.00-15 SL 4 PLY
22.	148-246S	5SL-15 SL 4 PLY WHL & TIRE ASY

22.	148-787S	5SL-15SL 4PLY WHL/TIRE ASY BKS
23.	136-121D	CHAIN RL #40 116 PITCHES
24.	804-093C	WASHER FLAT 3/4 HARD ASTMF436
25.	803-053C	NUT HEX SLOTTED 3/4-16
26.	805-104C	PIN COTTER 3/16 X 1 1/2 PLT
27.	804-017C	WASHER FLAT 1/2 USS PLT
28.	407-640D	TUBE RND 1 OD X 7/32WL X 2.50
29.	817-406C	IDLER 1 PC 2.38X1.01X1.062
30.	802-201C	HHCS 1/2-13X4 3/4 GR5
31.	802-413C	HHCS 1/2-13X4 1/2 GR5
32.	407-635H	FERT DRIVE WHEEL ARM WELD
33.	822-020C	BRG CUP LM-67010
34.	407-327D	4BOLT HUB TAPPERED ROL BRG
35.	407-450V	4 BOLT HUB & BEARING SUB ASY
36.	822-240C	BRG, DUO-FACE W/SEAL LM67000LA
37.	407-227S	4BOLT HUB ASY TAPPERED ROL BRG
38.	407-329D	BEARING SPACER
39.	805-127C	PIN CLEVIS 1/2 X 1 3/4
40.	805-045C	PIN COTTER 5/32 X 1 1/4 LG
41.	407-992S	GND DRIVE SPRING ASY
42.	407-636D	FERT DRIVE JACK SHAFT
43.	407-634H	FERT DRIVE CONT WHL SPKT WELD
44.	822-216C	BRG BALL 1.18ODX2.44OD
45.	805-234C	PIN CLEVIS 1/2 X 4 PLATED
46.	805-064C	PIN COTTER 7/64 X 1 LONG
47.	800-382C	SNAP RING INT 2.44 OD
48.	802-282C	RHSNB 5/16-18X1 GR5
49.	822-032C	FLANGETTE 52 MST
50.	822-119C	BRG 7/8HEXX2.05OD SPH

Includes items 8 & 9

Includes items 8-12

(YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/N B1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+)

Includes items 19-21(YP425A S/NB1048N-)(YP625A S/N B1197Q-)(YP825A S/N B1201Q-) (YP425A S/NB1049N+)(YP625A S/N B1198Q+)(YP825A S/N B1202Q+)

Includes items 33 & 34 Includes items 12 & 33-36

Includes items 56-63

Liquid Fertilizer Drive (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) (continued)

(Applies to YP425A, YP625A, YP825A only) rel Part No. Part Description
51.	136-261D	CHAIN RL #40 144 PITCHES
52.	803-177C	NUT HEX FLG TP LK 5/16-18ZNYCR
53.	195-243D	7/8 HEX SPROCKET WASHER
54.	808-262C	SPKT 40C47 X 7/8 HEX BORE
55.	805-240C	PIN LINCH 3/16 X 1 9/16 LONG
56.	816-306C	PLUG, SPRING ROD CASTING
57.	802-550C	HHCS 1/2-13X10 SPTHD GR8
58.	812-442C	DRV WHL SPRING TRUNION CASTING
59.	807-159C	SPRING COMP 2 1/2ODX3/8X12 7/8
60.	153-053D	SPRING STOP STAMPING SMALL
61.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
62.	803-036C	NUT HEX JAM 1/2-13 PLT
63.	121-166D	ADJ.YOKE END
64.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
65.	402-266D	7/8 HEX SHAFT SPACER TB X 9/32
66.	407-526H	GRND DRIVE FERT PUMP MNT
67.	802-106C	RHSNB 1/2-13X1 1/2 GR5
68.	407-745D	DRIVE ARM OUTER BRG PLT BOLTED
69.	805-195C	PIN HITCH 3/4 X 5 1/4 USEABLE
70.	818-855C	DECAL CAUTION TIRE 36 PSI
71.	831-110C	PUMP, CDS-JOHN BLUE NGP-4055-F

Comments

(YP425A S/N B1015N+) (YP625A S/N B1062Q+) (YP825A S/N B1033S+)

Refer to John Blue Pump (831-110C)

Revision

for breakdown

Liquid Fertilizer Drive (YP425A S/N B1009N+) (YP625A S/N B1044Q+) (YP825A S/N B1015S+) (continued) (Applies to YP425A, YP625A, YP825A only)

This Page Intentionally Left Blank

(Applies to YP425A, YP625A, YP825A only)

31360

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg31360	Image No.
1.	116134	REPAIR KIT JB FOR 831-110C
2.	116126-91	SUCTION VALVE FOR JB 831-110C
3.	116127-91	DISCHG VALVE FOR JB 831-110C
4.	115627-01	SETTING HUB
5.	115628-01	SETTING POINTER FOR JB 831-059
6.	115698-91	CHART ASY PUMP SETTING
7.	113918-01S	JOHN BLUE ADJUSTMENT WRENCH

Table of Contents Part Number Index Liquid Fertilizer Coulter

(Applies to YP425A, YP625A, YP825A only)

34395

Table of Contents Part Number Index Liquid Fertilizer Coulter

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg34395	Image No.
1.	803-020C	NUT HEX 1/2-13 PLT
2.	804-015C	WASHER LOCK SPRING 1/2 PLT
3.	820-156C	5/8 WAVY TURBO BLADE	(SHOWN)
3.	820-018C	COULTER BLADE FLUTED
4.	200-001D	HUB GREASE CAP
5.	805-017C	PIN COTTER 3/16 X 1 3/4 PLT
6.	803-029C	NUT HEX SLOTTED 7/8-14 PLT
7.	804-055C	WASHER SPINDLE - 7/8
8.	822-021C	BRG CONE 1.25ID LM-67048
9.	200-039V	COULTER HUB & CUP ASSY	Includes item 10
10.	800-001C	GREASE ZERK STRAIGHT 1/4-28
11.	816-009C	OIL SEAL DOUBLE LIP
12.	802-214C	RHSNB 1/2-13X1 1/4 GR5
13.	204-063S	HUB ASSY FERT COULT	Includes items: 4-11
14.	828-046C	NOZZLE SOLIDSTRM H1/4U-SS0040
15.	204-439H	VANTAGE I RH FERTILIZER ARM	(SHOWN)
15.	204-438H	VANTAGE I LH FERTILIZER ARM
16.	804-113C	WASHER FLAT 1/2 USS HARD PLT
17.	803-193C	NUT HEX FLANGE 1/2-13 GR G PLT
18.	830-406C	AD 1/4MNPT X 3/8 HB SS
19.	802-128C	HHCS 1/2-13X2 GR5
20.	204-731H	COULTER SWING ARM WELDMENT	(SHOWN) RH
20.	204-733H	COULTER SWING ARM WELDMENT	LH
21.	838-482C	DECAL GP PLANTING COMPONENTS
22.	801-040C	SCREW SQ HD 5/8-11 X 1 CUP PT
23.	803-024C	NUT LOCK 5/8-11 PLT
24.	801-083C	SCREW SET 5/8-11X1 1/2 GR8 CUP
25.	149-032D	LOW PRO COULTER STOP 5 DEGREE
26.	817-513C	BUSHING 1X3/4X1 1/8 FLG HD
27.	249-002D	PVT CLTR CASTING MOUNT RH	(SHOWN)
27.	249-003D	PVT CLTR CASTING MOUNT LH
28.	805-331C	COULTER SPRING GUIDE TUBE
29.	802-718C	EYE BOLT 3/4-10X14 3/4 LG SP
30.	149-559D	SPRING 2.25 O.D. X .5 COIL
31.	149-558D	COULTER SPRING WASHER
32.	803-048C	NUT HEX JAM 3/4-10 PLT
33.	890-389C	BUSHING 1.50ODX1.25IDX2.94
34.	804-165C	WASHER MACH 1 7/8X1 1/4X 14GA
35.	800-177C	SNAP RING EXT 1 1/4 HEAVY
36.	800-164C	SNAP RING 3/4 EXTERNAL HEAVY
37.	804-156C	WASHER MACH 1 1/4X3/4X14GA
38.	204-418D	SHANK 1 1/2D X 30 FERT COULT
39.	805-043C	PIN SPIROL 3/8X2 1/2 PLAIN
40.	204-178H	SHANK 1 1/2 X 30 X 5 OFFSET
41.	204-040D	CLAMP PLT 7 BAR
42.	802-060C	HHCS 5/8-11X4 GR5
43.	204-072D	CLAMP SHANK 1 1/2 DIA

(Applies to YP425A, YP625A, YP825A only)

31356

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description Comments	Revision
	dwg31356	Image No.
1.	MLST150-H	HEAD FOR BANJO 831-078C
2.	LST150-B	BANJO 1 1/2 FLG T-STRAIN BOWL
3.	LSQ200-PL	PLUG FOR BANJO 831-078C
4.	LSQ200-R	BANJO GASKET/O-RING
5.	LST150-GV	BANJO 1 1/2 GASKET - VITON
6.	LST1580	SCREEN FOR STRAINER 831-029C
7.	LS141G	BANGO SCREEN O-RING
8.	831-078C	STRAINER BANJO MLST150-80 MESH

(Applies to YP425A, YP625A, YP825A only)

15489

(Applies to YP425A, YP625A, YP825A only)

Re£ Part No. Part Description

Comments

Revision

dwg15489

1. 829-048C

2. V-20153

Image No.

VALVE - 1 1/2FNPT X 2FCL POLYP BANJO VALVE HANDLE 1.25-1.5

(Applies to YP425A, YP625A, YP825A only)

29907

Table of Contents Part Number Index

1 1/2 Mani 3 Way Ball Valve (829-126C)

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg29907	Image No.
1.	829-126C	VALVE 1 1/2 MANI 3 WAY BALL	Includes items 2-7
2.	V20060	BANJO THRUST BUSHING
3.	V20159	BANJO UPPER STEM BUSHING
4.	VE20258A	BANJO SEAT
5.	VE20264	BANJO BODY O-RING
6.	V20353TB	BANJO HANDLE (T)
7.	V20163	BANJO STEM 0-RING -FKM (VITON)

(Applies to YP425A, YP625A, YP825A only)

68048

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments				Revision
	dwg 68048	Image No.
1.	817-634C	TANK 50 GALLON PCO
2.	503-065H	TANK STRAP TSF-660 FLUSH WELD
3.	802-424C	HHCS 1/2-13X4 FTHD
4.	803-020C	NUT HEX 1/2-13 PLT
5.	407-458H	50 GALLON ACCUSHOT TANK MOUNT
6.	427-004H	50 GALLON TANK MOUNT
7.	806-102C	U-BOLT 3/4-10 CORNER 7 SQ
8.	803-181C	NUT HEX FLANGE LOCK 3/4-10 PLT
9.	401-648H	4-30 MAIN FRAME WELDMENT	Used	with	4	Row only. Shown.
9.	401-649H	6-30 MAIN FRAME WELDMENT	Used	with	4	row	wide & 6 Row only.
9.	401-650H	8-30 MAIN FRAME WELDMENT	Used	with	6	row	wide & 8 Row only.
9.	401-711H	8-WIDE MAIN FRAME WELDMENT	Used	with	8	row	wide only
10.	837-164C	9 GALLON WASH TANK TOOLBOX
11.	802-007C	HHCS 5/16-18X3/4 GR5
12.	804-009C	WASHER LOCK SPRING 5/16 PLT
13.	804-036C	WASHER FLAT 5/16 SAE PLT
14.	115100-181	ACCUSHOT CONTROLLER 18CH
15.	802-017C	HHCS 3/8-16X1 GR5
16.	804-013C	WASHER LOCK SPRING 3/8 PLT
17.	803-014C	NUT HEX 3/8-16 PLT
18.	858-708C	DECAL ACCUSHOT CONTROLLER

(Applies to YP425A, YP625A, YP825A only)

68051

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg 68051	Image No.
1.	817-634C	TANK 50 GALLON PCO
2.	830-295C	SP 3/4FNPT DBL THD BH PO BANJO
3.	830-123C	EL 3/4MNPT X 3/4HB POLYPROP
4.	800-123C	CLAMP WRM DRV #16 SS (.68-1.5)
5.	990-078R	HOSE 3/4ID X 1/8 WL CLEAR PVC
6.	830-049C	EL 3/4MNPT X 3/4FNPT POLYP
7.	829-147C	VALVE BALL 3/4HB 3/4MNPT POLY
8.	990-081R	HOSE 3/4 ID 200PSI EPDM
9.	830-369C	EL 1 FLANGE X 3/4HB POLY
10.	830-458C	CLAMP 1 FLANGE HYPRO
11.	830-461C	GASKET 1 FLANGE HYPRO
12.	830-364C	TEE 1 FLANGE POLY
13.	829-114C	VALVE 1 MANIFOLD BALL POLY
14.	829-105C	VALVE RELIEF 0-150 PSI POLYP
15.	830-192C	AD 1/4MNPT CLOSE X 7/8 SS
16.	507-034V	GAUGE PROTECTOR ASSY
17.	829-104C	GAUGE 100 PSI 4IN STAINLESS ST
18.	830-473C	AD 1FLANGE 3/4FNPT POLY
19.	831-132C	BANJO STRAINER MLST100-80
20.	417-757D	FILTER MOUNT PLATE
21.	802-282C	RHSNB 5/16-18X1 GR5
22.	804-036C	WASHER FLAT 5/16 SAE PLT
23.	804-009C	WASHER LOCK SPRING 5/16 PLT
24.	803-008C	NUT HEX 5/16-18 PLT
25.	802-279C	HHCS 5/16-18X4 GR5
26.	830-365C	PL 1 FLANGE W/ 1/4FNPT POLY
27.	830-374C	AD 1 FLANGE X 1 HB POLY
28.	800-124C	CLAMP WRM DRV #24 SS (1.06-2)
29.	830-370C	AD 1 1/2 FLANGE X 1 HB POLY
30.	830-462C	GASKET 1 1/2 FLANGE HYPRO
31.	830-459C	CLAMP 1 1/2 FLANGE HYPRO
32.	823-435C	RAVEN RFM-15 FLOWMETER
33.	466980040S1	DJ RAVEN FLOW MTR AD CABLE
34.	990-082R	HOSE 1 ID 200PSI EPDM
35.	830-474C	AD 3/4MNPT 1FL POLY
36.	831-131C	FMC-75-HYD204 ACE PUMP TOP
37.	830-389C	AD 1 FLANGE X 1 MNPT POLY
38.	830-332C	AD 1 1/2 FLANGE X 1 FLANGE
39.	830-183C	CA 2FCL POLYPROP
40.	830-180C	AD 2MNPT X 2MCL POLY
41.	830-165C	AD 2FNPT X 2MCL POLYPROP
42.	829-048C	VALVE - 1 1/2FNPT X 2FCL POLYP
43.	417-755D	BANJO VALVE 7X7 TUBE MNT PLATE
44.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
45.	804-013C	WASHER LOCK SPRING 3/8 PLT
46.	803-014C	NUT HEX 3/8-16 PLT
47.	802-223C	HHCS 3/8-16X4 GR5
48.	830-094C	AD 1 1/2MNPT X 1 1/2HB POLYP
49.	800-125C	CLAMP WRM DRV#28 SS(1.31-2.25)
50.	990-079R	HOSE 1 1/2ID EPDM SUCTION HOSE
51.	ACE-10507	1 1/2 BHEAD ACE ROTO-MOLD
52.	830-324C	AD 1 1/2 FLG X 1 1/2 MNPT POLY
53.	829-111C	VALVE 1 1/2 MANIFOLD BALL POLY
54.	830-329C	TEE 1 1/2 FLANGE POLY
55.	830-325C	EL 1 1/2 FLANGE X 1 1/2HB POLY
56.	830-345C	AD 2"FLANGE X 1 1/2 HB

(Applies to YP425A, YP625A, YP825A only)

68053

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg 68053	Image No.
1.	831-131C	FMC-75-HYD204 ACE PUMP TOP
2.	811-088C	AD 3/4MORB 3/4MJIC
3.	811-150C	EL 3/4FJIC 3/4MJIC
4.	810-696C	VALVE INLINE CHECK W/ ORIFICE
5.	417-756D	PUMP MOUNT PLATE
6.	802-079C	HHCS 3/8-16X1 1/4 GR5
7.	804-012C	WASHER FLAT 3/8 SAE PLT
8.	804-013C	WASHER LOCK SPRING 3/8 PLT
9.	803-014C	NUT HEX 3/8-16 PLT
10.	850-038C	PRESSURE COMP PWM VALVE
11.	841-838C	HH1/2R2 185 3/4FJIC 3/4MORB
12.	851-385C	HH1/2R2 28 3/4FJIC
13.	802-138C	HHCS 5/16-18X2 1/4 GR5
14.	804-009C	WASHER LOCK SPRING 5/16
15.	803-008C	NUT HEX 5/16-18 PLT
16.	800-239C	1.125 WIRING AND TUBE CLIP
17.	811-512C	HH1/2R2 219 3/4FJIC 3/4MORB
18.	811-394C	CP 3/4FORB MALE QD POPPET TYPE
19.	548-004S	HG PAIR - YELLOW MORB-FORB

(Applies to YP425A, YP625A, YP825A only)

68049

(Applies to YP425A, YP625A, YP825A only)

fbe	Part No.	Part Description
	dwg 68049	Image No.
1.	115100-181	ACCUSHOT CONTROLLER 18CH
2.	115201-009	ACCUSHOT POWER HARNESS 120
3.	115203-003	ACCUSHOT VALVE 18CH EXT 048
4.	115205-008	ACCUSHOT ACC HARN YP4/6/8
5.	115206-001	ACCUSHOT GPS SENSOR MAG MNT
6.	116301-001	ACCUSHOT PRESSURE SENSOR
7.	115400-001	ACCUSHOT CAB KIT
8.	115700-002	ACCUSHOT MANUAL QUICK START
9.	115700-001	ACCUSHOT OP MANUAL
10.	823-463C	5/16 8AWG RING TERMINAL
11.	823-462C	1/4 8AWG RING TERMINAL
12.	705726-116	ELEC BREAKER BLOCK 60AMP 12VDC
13.	115206-100	ACCUSHOT KEYFOB
14.	115300-001	ACCUSHOT CAL CONTAINER 32OZ
15.	115290-111	ACCUSHOT VALVE ASY ARAG 12W HS
16.	115201-002	ACCUSHOT TRACTOR POWER CORD

Comments

Revision

Includes 8 - 16.

(Applies to YP425A, YP625A, YP825A only)

68054

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg 68054	Image No.
1.	115200-102	ACCUSHOT VALVE HARNESS 06R30
2.	417-660D	ACCUSHOT WETBOOM TUBE 03R30
3.	417-786V	SOLENOID NOZZLE BODY	Includes 4 - 9.
4.	115290-111	ACCUSHOT VALVE ASY ARAG 12W HS
5.	829-152C	NZZL BD 1IN WET BOOM NO CHK
6.	832-051C	NOZZLE CAP QUICK X 90X1/4 FNPT
7.	830-426C	AD 1/4MNPT X 3/8OD TUBE PTC
8.	830-464C	3/8PTC LOCKING CLIP
9.	417-644D	TUBING 3/8ODX.075WLX78 NYLON
10.	417-792H	WETBOOM RISER PIPE
11.	830-022C	PL 1MNPT POLYPROP
12.	830-029C	TEE 1FNPT POLYPROP
13.	830-127C	EL 1MNPT X 1HB POLYPROP
14.	417-692D	WETBOOM OFFSET PLT
15.	806-107C	U-BOLT 5/16-18 X 1 17/32X2 1/8
16.	806-192C	U-BOLT 5/16-18X1 1/2X2 1/2 RND
17.	803-043C	NUT HEX WHIZ 5/16-18 PLT

(Applies to YP425A, YP625A, YP825A only)

68055

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg 68055	Image No.
1.	115200-103	ACCUSHOT VALVE HARNESS 08R30
2.	417-658D	ACCUSHOT WETBOOM TUBE 04R30
3.	417-786V	SOLENOID NOZZLE BODY	Includes 4 - 9.
4.	115290-111	ACCUSHOT VALVE ASY ARAG 12W HS
5.	829-152C	NZZL BD 1IN WET BOOM NO CHK
6.	832-051C	NOZZLE CAP QUICK X 90X1/4 FNPT
7.	830-426C	AD 1/4MNPT X 3/8OD TUBE PTC
8.	830-464C	3/8PTC LOCKING CLIP
9.	417-644D	TUBING 3/8ODX.075WLX78 NYLON
10.	417-792H	WETBOOM RISER PIPE
11.	830-022C	PL 1MNPT POLYPROP
12.	830-029C	TEE 1FNPT POLYPROP
13.	830-127C	EL 1MNPT X 1HB POLYPROP
14.	417-692D	WETBOOM OFFSET PLT
15.	806-107C	U-BOLT 5/16-18 X 1 17/32X2 1/8
16.	806-192C	U-BOLT 5/16-18X1 1/2X2 1/2 RND
17.	803-043C	NUT HEX WHIZ 5/16-18 PLT

(Applies to YP425A, YP625A, YP825A only)

29957

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg29957	Part Description Image No.	Comments Revision
1.	833-407C	CONSOLE ASSY, DJ PM 300
2.	833-179C	DJ RADAR SENSOR W/HARDWARE
3.	833-321C	CABLE EXT 25' RADAR GRD SPEED
4.	833-452C	DJ SENSOR TO RADAR 15.5 EXT.
5.	466970014S1	DJ FAN RPM SENSOR THRD HALL	Formerly 833-451C
6.	467980250	DJ PM300 ADAPTER CABLE	Used with Twin Row
7.	467981736	DJ 8 ROW TWIN CENTER HARNESS
7.	458410540	DJ 6 ROW 30 CENTER HARNESS
7.	467981701	DJ 6 ROW TWIN CENTER HARNESS
7.	458410520	DJ 4 ROW 30 CENTER HARNESS
7.	458410560	DJ 8 ROW 30 CENTER HARNESS	(SHOWN)
7.	467751782S1	DJ 3PYP 8 ROW WING 30
8.	800-060C	CABLE TIE .19X14.25 3DIA 50LB	Formerly 800-244C
9.	833-210C	DJ CABLE EXTENSION 6FT	Use 1 Ext. with Twin Row unit. Use 2 Ext. with Twin Row and Fertilizer unit.
10.	467990151	DJ BRACKET FOR 833-407C

(Applies to YP425A, YP625A, YP825A only)

31972

Table of Contents Part Number Index Monitor Wide Row

Monitor

(Applies to YP425A, YP625A, YP825A only)

Rf	Part No. dwg31972	Part Description Image No.	Comments
1.	833-407C	CONSOLE ASSY, DJ PM 300
2.	833-321C	CABLE EXT 25' RADAR GRD SPEED
3.	833-452C	DJ SENSOR TO RADAR 15.5 EXT.
4.	466970014S1	DJ FAN RPM SENSOR THRD HALL
5.	467981760	DJ 4 ROW WIDE TWIN CTR HARNESS
5.	467981761	DJ 6 ROW WIDE TWIN CTR HARNESS
5.	467981762	DJ 8 ROW WIDE TWIN CTR HARNESS	(SHOWN)
6.	800-060C	CABLE TIE .19X14.25 3DIA 50LB	Formerly 800-244C
7.	833-210C	DJ CABLE EXTENSION 6FT	Use 1 extension w/out fertilizer. Use 2 extension with fertilizer.
8.	467990151	DJ BRACKET FOR 833-407C

Revision

Flat Fold Marker

(Applies to YP425A, YP625A, YP825A only) 29872

Flat Fold Marker

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments Revision
	dwg29872	Image No.
1.	113-563S	MARKER DISC & HUB ASSEMBLY	Refer to Disk Assembly for breakdown
2.	802-039C	HHCS 1/2-13X3 GR5
3.	804-017C	WASHER FLAT 1/2 USS PLT
4.	803-019C	NUT LOCK 1/2-13 PLT
5.	113-848D	MARKER TUBE 20" LG	Shown Used with 4 Row
5.	113-440D	MARKER TUBE 36 LG	Used with 6 & 8 Row and 4 & 6 Row
			wide
5.	113-500D	MARKER TUBE 42 IN LONG	Used with 8 Row wide
6.	113-835H	4 ROW 2ND STAGE ARM WMNT	Shown
6.	113-449H	6 ROW 2ND STAGE ARM WMNT	Used on 4 Row wide & 6 Row
6.	113-450H	8 ROW 2ND STAGE ARM WMNT	Used on 8 Row 30" & 36"
6.	113-514H	8 ROW WIDE 2ND STAGE ARM WMNT	Used on 8 Row 38" & 40"
7.	806-103C	U-BOLT 1/2-13 1 17/32 X 2 3/4
8.	803-011C	NUT LOCK 5/16-18 PLT
9.	890-143C	BUSHING HARDENED 1 1/4-1-3/4 L
10.	113-440H	2ND STAGE MOUNT WMNT
11.	805-060C	PIN COTTER 7/32 X 2
12.	113-446H	TRANSFER LINK WMNT
13.	113-448H	CYL. PIVOT PIN WMNT
14.	816-166C	O-RING 1 ID X 1 1/4 OD X 1/8
15.	800-001C	GREASE ZERK STRAIGHT 1/4-28
16.	890-005C	BUSHING CYL 1 1/4 X 1 X 1
17.	113-437H	1ST STAGE ARM WELDMENT
18.	113-447E	PIVOT LINK WELDMENT
19.	113-453S	PIVOT LINK BUSHING ASSY
20.	113-438D	CYLINDER LINK PIN
21.	805-180C	PIN ROLL 1/4 X 1 1/2 LG PLT
22.	113-442H	2ND STAGE MOUNT PIN
23.	802-295C	HHCS 5/16-18X1 1/2 GR2
24.	113-439D	1ST STAGE MOUNTING PIN
25.	113-444H	CYLINDER TANG WMNT
26.	817-145C	THREAD PROTECTOR-DELRIN
27.	801-045C	SCREW SET 1/4-28X1/4 KNL CUP
28.	810-196C	CYL 2.5X10X1.12 ROD (TIE)	Refer to Marker Midway Hydraulic Cylinder (810-196C) for breakdown
29.	113-435H	PLANTER MARKER MOUNT WMNT
30.	113-435D	CYLINDER LUG PIN
31.	113-437D	CYLINDER SPACER W/ HOLE
32.	113-436D	CYLINDER SPACER
33.	113-551D	MARKER SHIM
34.	802-042C	HHCS 1/2-13X3 3/4 GR5
35.	802-055C	HHCS 5/8-11X2 GR5
36.	803-022C	NUT HEX 5/8-18 PLT
37.	804-021C	WASHER FLAT 5/8 SAE PLT
38.	802-099C	HHCS 1/2-13X3 1/4 GR5
39.	113-491D	ADJUST MOUNT SPACER TUBE
40.	804-015C	WASHER LOCK SPRING 1/2 PLT
41.	803-020C	NUT HEX 1/2-13 PLT
42.	113-503H	MARKER DISK ADJUST MOUNT

Table of Contents Part Number Index Marker Disc Assembly (113-563S)

(Applies to YP425A, YP625A, YP825A only)

15481

Table of Contents Part Number Index Marker Disc Assembly (113-563S)

Marker

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No.	Part Description	Comments	Revision
	dwg 15481	Image No.
1.	815-001C	TINE GW HUB	Includes 2 - 8.
2.	816-014C	TINE GAUGE WHEEL HUB SEAL
3.	822-030C	BEARING CONE 1
4.	822-080C	BEARING CUP L44610
5.	BO-47	NEILSON STUD 1/2-20UNFX1 13/16
6.	1-100-02-00	RELIABLE HUB 4 BOLT
7.	890-614C	GREASE CAP #1505
8.	803-159C	NUT LUG 1/2-20X60DEG PLT(.75AF
9.	116-353D	BLADE SPACER
10.	113-562H	1 SPINDLE MARKER WELDMENT
11.	804-025C	WASHER FLAT 3/4 SAE PLT
12.	803-053C	NUT HEX SLOTTED 3/4-16
13.	805-019C	PIN COTTER 5/32 X 1 PLT
14.	820-094C	16 4-BOLT NOTCHED MARKER DISK
15.	113-369H	DEPTH BAND 10 4-BOLT 4B.C.
16.	116-354D	MARKER DISC SAFETY STRAP
17.	802-017C	HHCS 3/8-16X1 GR5
18.	803-014C	NUT HEX 3/8-16 PLT
19.	804-012C	WASHER FLAT 3/8 SAE PLT
20.	804-013C	WASHER LOCK SPRING 3/8 PLT

Decal Placement

(Applies to YP425A, YP625A, YP825A only)

29960

Decal Placement

(Applies to YP425A, YP625A, YP825A only)

Ref	Part No. dwg29960	Part Description Image No.	Comments Revision
1.	838-161C	DECAL LOGO&GP F/STRIPE 4 X 24
2.	838-160C	DECAL 3 COLOR STRIPE 2.50 WIDE
3.	818-339C	DECAL WARNING HIGH PRESSUR SML
4.	818-587C	DECAL CAUTION OPERATIONAL MACH
5.	818-188C	DECAL WARNING 20 MPH TRANS LRG
6.	848-492C	DECALYP425A
6.	848-493C	DECALYP625A
6.	848-494C	DECALYP825A	Shown
7.	838-265C	DECAL REFLECTOR AMBER 1 1/2X9
8.	838-363C	DECAL PIC--MOVING CHAIN
9.	818-682C	DECAL WARNING PINCH/CRUSH MRKR
10.	818-349C	DECAL GREASE 10 HRS LH
11.	838-267C	DECAL REFLECTR DAYTIME 1 1/2X9
12.	838-266C	DECAL REFLECTOR RED 1 1/2X9
13.	818-402C	DECAL GREASE 10 HRS RH
14.	848-541C	DECAL LOGO&GP F/STRIPE 3 X 12
15.	848-542C	DECAL YIELD-PRO SMALL
16.	848-555C	DECAL VALVE SELECTOR
17.	891-259C	SEED TUBE CLEANER BRUSH
18.	431-615D	YP825 AMBER DECAL BRKT 10GA
19.	806-073C	U-BOLT 3/8-16 X 7 1/32 X 7 7/8
20.	804-012C	WASHER FLAT 3/8 SAE PLT
21.	804-013C	WASHER LOCK SPRING 3/8 PLT
22.	803-014C	NUT HEX 3/8-16 PLT
23.	431-829D	DECAL MOUNT	YP425A S/N B1068N+, YP625A S/N B1213Q+, and YP825A S/N B1432S+
24.	802-014C	HHCS 3/8-16X3/4 GR5
25.	802-017C	HHCS 3/8-16X1 GR5

Part Number Index

The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on.

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
1-100-02-00 ......	.........233	1182 ................	..........181	198-333D.........	..........93, 95, 97	204-418D.........	..........207
1042 .................	.........181	120-188D .........	..........61	198-334D.........	..........85	204-438H .........	..........207
106532-01 ........	.........195	120-263D .........	..........62	198-335D.........	..........85	204-439H .........	..........207
107-111D ..........	.........88	120-269S .........	..........61	199-015D.........	..........125, 127, 129,	204-664H .........	..........117
1087-250 ..........	.........181	120-306D .........	..........49, 51,57, 59,		131, 137, 139	204-731H .........	..........207
1087-437 ..........	.........181		183, 187, 199	199-057H .........	..........125, 129, 137	204-733H .........	..........207
1088-011 ..........	.........181	120-310D .........	..........62	199-058H .........	..........125, 137	206-010D.........	..........109
1088-905 ..........	.........181	120825 ............	..........99	199-059H .........	..........121, 137	206-011D.........	..........109
1088-906 ..........	.........181	121-166D .........	..........61,202	199-060H .........	..........129	206-012D.........	..........109
1088-908 ..........	.........181	1211 ................	..........181	199-087H .........	..........137	206-014S .........	..........109
1089-011 ..........	.........181	1217 ................	..........181	199-088D.........	..........121, 123, 125,	207-067D .........	..........103, 105, 115
1092-6 ..............	.........181	1218 ................	..........181		127, 129, 131,	207-072D .........	..........107
1092-6-6 ...........	.........181	122-231A .........	..........109		137, 139	207-094H .........	..........105, 115
1099 .................	.........181	123-004D .........	..........197	199-106D.........	..........121, 125, 129,	207-095H .........	..........105, 115
1100-011 ..........	.........181	129BXT822 .....	..........99		137	207-099H .........	..........103, 105
113-369H ..........	.........233	136-018D .........	..........49	199-107D.........	..........121, 123, 125,	207-106D.........	..........107
113-435D ..........	.........231	136-047D .........	..........55		127, 129, 131,	207-107D.........	..........107
113-435H ..........	.........231	136-051D .........	..........61		137, 139	207-108D.........	..........107
113-436D ..........	.........231	136-059D .........	..........51,57, 59	199-108H .........	..........88, 121, 129, 137	207-142V .........	..........103, 115
113-437D ..........	.........231	136-060D .........	..........199	199-109H .........	..........87, 121, 125, 137	207-143V .........	..........103, 115
113-437H ..........	.........231	136-080D .........	..........51	199-113D.........	..........121, 123, 125,	207-148H .........	..........103, 115
113-438D ..........	.........231	136-093D .........	..........51		127, 129, 131,	207-214H .........	..........107
113-439D ..........	.........231	136-110D .........	..........57, 59		133, 135, 137,	20875A ............	..........167
113-440D ..........	.........231	136-113D .........	..........53, 55		139, 141	21121 ..............	..........23
113-440H ..........	.........231	136-121D .........	..........201	199-114D.........	..........123, 127, 131,	2153 ................	..........181
113-442H ..........	.........231	136-151D .........	..........49		133, 135, 139,	23320 ..............	..........23
113-444H ..........	.........231	136-152D .........	..........57		141	249-002D .........	..........117, 207
113-446H ..........	.........231	136-178D .........	..........199	199-128D.........	..........133	249-003D .........	..........207
113-447E ..........	.........231	136-261D .........	..........202	199-135D.........	..........133	25748A ............	..........169
113-448H ..........	.........231	136-263D .........	..........85	199-140H .........	..........88, 123, 131,	288-374H .........	..........85
113-449H ..........	.........231	136-264D .........	..........85		133, 135, 139,	298-509H .........	..........85
113-450H ..........	.........231	136-265D .........	..........85		141	298-510H .........	..........85
113-453S ..........	.........231	136-271D .........	..........199	199-141H .........	..........87, 123, 127,	298-513H .........	..........85
113-491D ..........	.........231	14677A ............	..........171		133, 135, 139,	298-881S .........	..........87
113-500D ..........	.........231	14678A ............	..........169		141	298-882S .........	..........87
113-503H ..........	.........231	14679B ............	..........167	199-142H .........	..........131, 139	298-884H .........	..........85
113-514H ..........	.........231	148-246S .........	..........201	199-143H .........	..........127, 139	298-885H .........	..........85
113-551D ..........	.........231	148-787S .........	..........201	199-144H .........	..........123, 139	298-886H .........	..........85
113-562H ..........	.........233	149-032D .........	..........117, 207	199-145H .........	..........123, 139	2A0012 ............	..........179
113-563S ..........	.........231	149-558D .........	..........117, 207	199-146A .........	..........137	2A0014 ............	..........175
113-835H ..........	.........231	149-559D .........	..........117, 207	199-147A .........	..........121, 125, 129,	2A0016 ............	..........173
113-848D ..........	.........231	15044C ............	..........167		137	2A0022 ............	..........179
1132-05 ............	.........181	152-586D .........	..........61	199-148H .........	..........137	2A0024 ............	..........173, 175
1132-08 ............	.........181	153-053D .........	..........61,202	199-149H .........	..........121, 125, 129,	2A0126 ............	..........179
113918-01S ......	.........205	15323B ............	..........171		137	2M3393 ...........	..........179
115100-181 ......	.........215, 221	15338C ............	..........169	199-151S .........	..........133	2M3550NC ......	..........177
115200-102 ......	.........223	15342B ............	..........171	199-152H .........	..........133	2M4630NC ......	..........175
115200-103 ......	.........225	15586A ............	..........169, 171	199-153H .........	..........133, 135, 141	2M5795NC ......	..........173
115201-002 ......	.........221	168-094D .........	..........23	1GP3794-ADI ..	..........173, 175, 177	3089 ................	..........181
115201-009 ......	.........221	17089 ..............	..........23	200-001D.........	..........117, 207	31874D ............	..........169
115203-003 ......	.........221	177-587D .........	..........9	200-002D .........	..........117	31881B ............	..........167
115205-008 ......	.........221	18467B ............	..........167	200-039V .........	..........117, 207	31882D ............	..........167
115206-001 ......	.........221	18487D ............	..........171	204-013D.........	..........117	3GP3806 .........	..........173
115206-100 ......	.........221	18492B ............	..........171	204-029D .........	..........117	3GP3836 .........	..........175
115290-111 ......	.........221,223, 225	18503B ............	..........169	204-040D .........	..........117, 207	3GP3866 .........	..........177
115300-001 ......	.........221	188-001V .........	..........88	204-063S .........	..........207	3R0310 ............	..........179
115400-001 ......	.........221	188-006V .........	..........53, 55, 61	204-072D .........	..........117, 207	401-002D.........	..........9
115627-01 ........	.........205	194-401D .........	..........69, 71	204-084S .........	..........101, 119	401-022H .........	..........9
115628-01 ........	.........205	194-402D .........	..........69, 71	204-133H .........	..........125, 127, 135	401-023H .........	..........9
115698-91 ........	.........205	195-243D .........	..........202	204-134H .........	..........129, 131, 135	401-363H .........	..........24
115700-001 ......	.........221	195-376D .........	..........51	204-139H .........	..........105, 119	401-528D.........	..........191
115700-002 ......	.........221	198-202D .........	..........87	204-172D.........	..........117	401-537D.........	..........23
116-353D ..........	.........233	198-240D .........	..........85	204-178H .........	..........207	401-648H .........	..........9, 13, 23, 163,
116-354D ..........	.........233	198-257D .........	..........85, 93, 95, 97	204-179D.........	..........117		215
116126-91 ........	.........205	198-288D .........	..........87	204-241D.........	..........78, 82, 117	401-649H .........	..........9, 13, 23, 163,
116127-91 ........	.........205	198-289D .........	..........87	204-242D .........	..........117		215
116134 .............	.........205	198-290D .........	..........87	204-268D .........	..........117	401-650H .........	..........9, 13, 23, 163,
116301-001 ......	.........221	198-291D .........	..........87	204-328D .........	..........101		215
1179 .................	.........181	198-295D .........	..........85	204-329D .........	..........101	401-656H .........	..........23, 33
1180 .................	.........181	198-331D .........	..........87	204-399D .........	..........117	401-667H .........	..........23

Part Number Index (continued)

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
401-711H ............	........9, 13, 23, 215	402-663D ............	........75	403-934D...........	........95	407-181H ............	........15, 19
401-824H ............	........9	402-906D ............	........62	403-943D...........	........95	407-186L ............	........17
401-826A ............	........9	402-933D ............	........61	403-958K ...........	........95	407-220H ............	........105
401-834H ............	........155, 157, 159,	403-175H ............	........45, 47	403-959K ...........	........95	407-221H ............	........105
	161	403-265D ............	........45, 47	404-014S ...........	........87	407-227S ............	........61,201
401-836H ............	........155, 157, 159,	403-278H ............	........77, 81	404-020D...........	........87	407-251D ............	........15
	161	403-284S ............	........77, 81	404-061D...........	........109	407-253H ............	........17
401-841S ............	........155, 157, 159	403-301S ............	........87	404-077D...........	........87	407-257H ............	........9, 13, 17, 21, 191
401-843S ............	........161	403-338D ............	........24	404-078D...........	........87	407-258L ............	........17
402-021S ............	........65, 195	403-361S ............	........23, 33	404-079D...........	........87	407-262D ............	........19
402-022H ............	........17, 21,65, 195	403-429D ............	........91	404-088H ...........	........109	407-263D ............	........15, 19
402-025S ............	........49, 51,59, 61,	403-441D ............	........77, 81	404-119D...........	........87	407-264D ............	........15, 19
	199	403-464H ............	........81	404-121S ...........	........88	407-265D ............	........15
402-076D ............	........53	403-465K ............	........91	404-144D...........	........109	407-308D ............	........57, 59, 199
402-094D ............	........67	403-466K ............	........91	404-147D...........	........121, 123, 125,	407-327D ............	........61,201
402-122H ............	........49, 53	403-467H ............	........91		129, 137, 139	407-329D ............	........201
402-126H ............	........57, 59	403-468H ............	........91	404-152D...........	........87	407-384D ............	........57, 59, 199
402-130D ............	........67	403-469H ............	........91	404-153D...........	........87	407-385D ............	........199
402-134S ............	........59	403-483D ............	........77, 81	404-155D...........	........87	407-386D ............	........183, 187, 195
402-229H ............	........67	403-484D ............	........77, 81	404-171D...........	........87	407-388D ............	........183, 187
402-231D ............	........71	403-509A ............	........78, 82	404-174D...........	........87	407-389D ............	........191
402-243D ............	........53	403-527S ............	........78, 82	404-194D...........	........113	407-428L ............	........17
402-262D ............	........49, 51	403-533D ............	........27, 29	404-195D...........	........113	407-429L ............	........17
402-266D ............	........202	403-551D ............	........78, 82	404-196D...........	........113	407-432H ............	........17
402-276D ............	........69, 71	403-556H ............	........45, 47	404-198D...........	........87	407-433H ............	........17
402-308H ............	........67	403-558D ............	........27, 31	404-212D...........	........109	407-434H ............	........117
402-309H ............	........67, 69, 71	403-559D ............	........27, 29	404-213D...........	........109	407-445H ............	........9, 13, 17, 21
402-310H ............	........61	403-561D ............	........27, 31	404-254D...........	........88	407-446L ............	........17
402-311H ............	........61	403-562D ............	........27, 29	404-255D...........	........88	407-450V ............	........201
402-313H ............	........61	403-563D ............	........27, 31	404-796H ...........	........87	407-458H ............	........215
402-316H ............	........53	403-564H ............	........93, 95	405-021H ...........	........137, 139, 141	407-473D ............	........61
402-319H ............	........199	403-565H ............	........93, 95	405-022H ...........	........137, 139, 141	407-515D ............	........183, 187
402-321S ............	........67, 69, 73	403-571D ............	........27	405-023S ...........	........137, 139, 141	407-519E ............	........201
402-339S ............	........65	403-573D ............	........29, 31	405-024S ...........	........137, 139, 141	407-520V ............	........201
402-347H ............	........69, 71	403-576D ............	........27	405-028H ...........	........143	407-521S ............	........201
402-348H ............	........69	403-578D ............	........27, 29, 31	405-031D...........	........121, 123, 125,	407-524H ............	........201
402-349H ............	........61	403-581D ............	........31		127, 129, 131,	407-526H ............	........202
402-350H ............	........51,57, 59	403-582D ............	........27, 29		133, 135, 137,	407-530D ............	........17, 21
402-351H ............	........55	403-593V ............	........93		139, 141	407-531D ............	........57, 59, 199
402-352H ............	........51,55	403-594K ............	........93	405-032D...........	........88	407-532D ............	........57, 59, 199
402-355S ............	........51,55	403-595K ............	........93	405-052D...........	........143	407-540D ............	........57, 59, 199
402-357H ............	........61	403-596A ............	........77, 82	405-053D...........	........143	407-541D ............	........17, 21
402-371H ............	........69, 71	403-608V ............	........77, 81	405-054D...........	........143	407-564K ............	........19
402-409H ............	........71	403-609D ............	........23, 33	405-055D...........	........137, 139, 141	407-566H ............	........19
402-410S ............	........71	403-614D ............	........77, 81	405-057D...........	........137, 139	407-569D ............	........57, 59
402-417D ............	........49	403-655D ............	........29, 31	405-063D...........	........141	407-575D ............	........21
402-420D ............	........53	403-667D ............	........85	406-025D...........	........27, 29, 31	407-634H ............	........201
402-427D ............	........49, 51	403-680D ............	........91	406-026D...........	........35	407-635D ............	........201
402-562D ............	........61	403-681D ............	........91	406-027D...........	........37, 39, 41	407-635H ............	........201
402-563D ............	........61	403-682D ............	........91	406-028D...........	........43	407-636D ............	........201
402-565D ............	........49, 51,57, 199	403-683D ............	........91	407-001H ...........	........9, 13, 17, 21, 191	407-639D ............	........201
402-566D ............	........53, 55	403-684D ............	........91	407-002H ...........	........13	407-640D ............	........201
402-567D ............	........49, 199	403-685D ............	........91	407-003H ...........	........13	407-641D ............	........197
402-568D ............	........53, 55	403-686D ............	........91	407-004H ...........	........11	407-642D ............	........201
402-574D ............	........49, 51,57, 199	403-687D ............	........91	407-005H ...........	........17, 21	407-649D ............	........185, 189
402-576D ............	........67, 69	403-690D ............	........27, 29, 31	407-006H ...........	........17, 21	407-662D ............	........19
402-579D ............	........49, 51,57, 199	403-691D ............	........27	407-011H ...........	........11	407-664L ............	........21
402-580D ............	........73	403-692D ............	........23, 33	407-012H ...........	........9, 13, 17, 21, 191	407-665D ............	........19
402-587D ............	........53, 55	403-726D ............	........78, 82	407-013H ...........	........11	407-665L ............	........21
402-588D ............	........53, 55	403-727D ............	........78, 82	407-014H ...........	........11	407-675L ............	........21
402-589D ............	........53, 55	403-739D ............	........91	407-023S ...........	........17, 21	407-676L ............	........21
402-590D ............	........53, 55	403-740K ............	........97	407-071D...........	........15	407-677D ............	........19
402-607D ............	........73, 75	403-743H ............	........97	407-106D...........	........21	407-677L ............	........21
402-608D ............	........49, 51	403-744H ............	........97	407-133D...........	........15	407-678D ............	........19
402-614D ............	........53, 55	403-745S ............	........97	407-134D...........	........191	407-681H ............	........21
402-615D ............	........49, 51,57, 199	403-747H ............	........97	407-137D...........	........191	407-682H ............	........21
402-616D ............	........53, 55	403-759S ............	........95	407-140D...........	........191	407-745D ............	........202
402-641D ............	........69, 71	403-774H ............	........77	407-146D...........	........57, 59, 199	407-914D ............	........191
402-653D ............	........55	403-852D ............	........93	407-147D...........	........57, 59, 199	407-924D ............	........192
402-654D ............	........55	403-896D ............	........97	407-148D...........	........15	407-992S ............	........61,201
402-662D ............	........75	403-905D ............	........97	407-170D...........	........61	411-030D ............	........24

Part Number Index (continued)

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
411-533H ..........	.........9	800-112C .........	..........35, 37, 39, 41,	802-024C .........	..........11,55	802-295C .........	..........231
411-642D ..........	..........163		43, 87	802-029C .........	..........137, 139, 141	802-301C.........	..........95
411-824D ..........	..........157	800-118C .........	..........77, 81,87	802-030C .........	..........101, 121, 125,	802-323C .........	..........93, 95, 97
411-825D ..........	..........155, 159, 161	800-120C .........	..........155, 157, 159,		129, 137	802-331C.........	..........61, 103, 105,
417-531D ..........	..........17, 19, 21,57, 59		161	802-034C .........	..........11,61		115, 201
417-644D ..........	.........223, 225	800-123C .........	..........183, 185, 187,	802-039C .........	..........17, 87, 231	802-338C .........	..........117
417-658D ..........	.........225		189, 191,217	802-041C.........	..........49, 51,57, 59,	802-370C .........	..........43
417-660D ..........	.........223	800-124C .........	..........217		61, 183, 187, 199	802-382C .........	..........51
417-692D ..........	.........223, 225	800-125C .........	..........183, 185, 187,	802-042C .........	..........197, 231	802-388C .........	..........78, 82
417-755D ..........	.........217		189, 217	802-044C .........	..........78, 82, 197	802-413C.........	..........61, 117, 123,
417-756D ..........	.........219	800-137C .........	..........91	802-047C .........	..........161		127, 131, 133,
417-757D ..........	.........217	800-151C .........	..........23	802-051C.........	..........67, 69, 71, 101,		135, 139, 141,
417-786V ..........	.........223, 225	800-164C .........	..........117, 207		143		201
417-792H ..........	.........223, 225	800-166C .........	..........109	802-055C .........	..........9, 231	802-424C .........	..........215
421-918D ..........	.........43	800-177C .........	..........117, 207	802-060C .........	..........91, 119, 123,	802-431C.........	..........111
427-004H ..........	.........215	800-203C .........	..........27, 29, 31, 77,		137, 139, 207	802-463C .........	..........107
431-281D ..........	.........61		82, 91	802-064C .........	..........9	802-550C .........	..........61,202
431-447D ..........	.........9	800-213C .........	..........88	802-065C .........	..........67, 69, 71	802-616C.........	..........121, 125, 129,
431-615D ..........	.........235	800-232C .........	..........101	802-068C .........	..........9, 13, 17, 21		137
431-829D ..........	.........235	800-239C .........	..........219	802-069C .........	..........9	802-625C .........	..........15
458410520 .......	.........227	800-241C .........	..........81	802-078C .........	..........27, 29, 31,77, 81	802-626C .........	..........95
458410540 .......	.........227	800-244C .........	..........88	802-079C .........	..........9, 23, 57, 59,	802-633C .........	..........95
458410560 .......	.........227	800-283C .........	..........91		133, 141, 199,	802-663C .........	..........87
466970014S1 ...	..........49, 51,227, 229	800-290C .........	..........67, 69, 71		219	802-673C .........	..........107
466980040S1 ...	.........217	800-298C .........	..........147, 149	802-082C .........	..........61, 133, 135, 141	802-697C .........	..........69, 71
467751782S1 ...	.........227	800-367C .........	..........191	802-087C .........	..........19	802-705C .........	..........77, 81
467980250 .......	.........227	800-373C .........	..........23	802-091C.........	..........57, 59, 88, 199	802-718C.........	..........117, 207
467981701 .......	.........227	800-382C .........	..........201	802-092C .........	..........57, 59, 87, 93,	802-745C .........	..........85
467981736 .......	.........227	800-395C .........	..........33		95, 97, 109, 125,	802-800C .........	..........23
467981760 .......	.........229	800-398C .........	..........81		127, 129, 131,	802-883C .........	..........111
467981761 .......	.........229	800-406C .........	..........77, 82		135, 199	802-906C .........	..........91
467981762 .......	.........229	800-413C .........	..........93	802-094C .........	..........111	803-003C .........	..........15
467990151 .......	.........227, 229	800-480C .........	..........77	802-099C .........	..........19, 21, 113, 231	803-006C .........	..........49, 51,61,91,
4M3102 ............	..........179	801-015C .........	..........117	802-104C.........	..........201		163
4M3108 ............	..........177	801-040C .........	..........117, 207	802-105C.........	..........23, 155, 157, 159	803-007C .........	..........27, 29, 31
4R1109 .............	..........175	801-045C .........	..........231	802-106C.........	..........88, 107, 119, 202	803-008C .........	..........15, 27, 29, 31,
4R3109 .............	..........173	801-055C .........	..........24	802-114C.........	..........53, 85, 93, 95, 97		103, 115, 125,
502-060D ..........	..........91, 185, 189	801-071C .........	..........191	802-128C.........	..........207		127, 129, 131,
502-068D ..........	..........9, 17, 147, 149	801-078C .........	..........109	802-138C.........	..........155, 157, 159,		135, 155, 157,
502-174D ..........	..........183, 185, 187,	801-081C .........	..........35, 37, 39, 41,43		161,219		159, 161, 185,
	189	801-083C .........	..........117, 207	802-143C.........	..........49		189, 191, 199,
503-065H ..........	.........215	801-084C .........	..........109	802-159C.........	..........9, 15, 77, 81,95,		217, 219
507-034V ..........	..........191,217	801-112C .........	..........195		97, 155, 157,	803-011C.........	..........231
507-039D ..........	..........191	801-137C .........	..........27, 29, 31		159, 161, 183,	803-014C.........	..........9, 17, 21,23, 35,
507-040D ..........	..........191	801-155C .........	..........77, 81		187, 191, 195		37, 39, 41,43,
548-004S ..........	.........219	801-164C .........	..........87	802-160C.........	..........121, 123, 125,		45, 47, 49, 51,
5M3118 ............	..........179	801-205C .........	..........15, 19		127, 129, 131,		53, 55, 57, 59,
5M3228 ............	..........177	802-001C .........	..........19		133, 135, 141		65, 85, 91,93,
5R1188 .............	..........175	802-002C .........	..........91	802-162C.........	..........137, 139		97, 99, 155, 159,
5R3188 .............	..........173	802-004C .........	..........43, 61	802-167C.........	..........23, 201		161, 185, 189,
67399 ...............	.........11	802-005C .........	..........23, 145, 201	802-172C.........	..........17, 21,27, 29,		195, 199, 215,
6GP3816 ..........	..........173	802-007C .........	..........77, 81,183, 185,		31,99		217, 219, 233,
6GP3846 ..........	..........175		187, 189, 215	802-182C.........	..........73		235
6GP3876 ..........	..........177	802-009C .........	..........103, 115	802-196C.........	..........27, 29, 31	803-019C.........	..........231
6R0154 .............	..........179	802-010C .........	..........51,55	802-201C.........	..........201	803-020C .........	..........49, 51,57, 59,
705726-116 ......	.........221	802-012C .........	..........15, 19	802-214C.........	..........101, 117, 207		61,87, 107, 113,
7M3318 ............	..........179	802-014C .........	..........77, 81,85, 97,	802-219C.........	..........105		117, 119, 161,
7M3428 ............	..........177		163, 235	802-223C .........	..........217		183, 187, 197,
7M4424 ............	..........175	802-015C .........	..........39, 41,85, 137,	802-224C .........	..........23, 49, 51, 163		199, 201,207,
7M5424 ............	..........173		139	802-228C .........	..........88		215, 231
800-001C ..........	..........61,67, 69, 71,	802-017C .........	..........17, 21,35, 37,	802-252C .........	..........99	803-021C.........	..........21,23, 27, 29,
	73, 87, 117, 201,		43, 45, 47, 85,	802-257C .........	..........93, 97		31,85, 91, 117,
	207, 231		91,93, 95, 97,	802-258C .........	..........88, 97		119, 121, 123,
800-038C ..........	.........61		183, 185, 187,	802-260C .........	..........85, 117		125, 127, 129,
800-046C ..........	.........77, 81		189, 215, 233,	802-261C.........	..........11		131, 137, 139,
800-051C ..........	.........91		235	802-262C .........	..........9		143, 155, 157,
800-054C ..........	..........133, 137, 139,	802-022C .........	..........17, 57, 59, 65,	802-270C .........	..........15		159
	141		143, 155, 157,	802-279C .........	..........217	803-022C .........	..........231
800-060C ..........	.........227, 229		159, 161, 195,	802-282C .........	..........49, 51,57, 59,	803-024C .........	..........207
800-067C ..........	..........15, 17, 19, 21		197, 199		199, 201,217	803-027C.........	..........9, 13, 69, 71
800-085C ..........	.........77, 81	802-023C .........	..........173, 175, 177	802-283C .........	..........69, 71,91	803-029C .........	..........117, 207

Part Number Index (continued)

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
803-032C .........	..........49, 51	804-010C .........	..........15, 19, 53, 77,	804-156C.........	..........117, 207	806-107C .........	..........23, 33, 223, 225
803-036C .........	..........61, 197, 202		81,93, 95, 97,	804-165C.........	..........61, 117, 207	806-139C .........	..........13, 17, 21, 197
803-043C .........	..........77, 81,87, 99,		199	804-168C.........	..........77, 81	806-150C .........	..........57, 59, 155, 159,
	109, 223, 225	804-011C .........	..........9, 17, 21,23, 49,	804-195C.........	..........87		161,191, 199
803-048C .........	..........117, 207		51,57, 59, 65,	804-227C.........	..........77, 81	806-152C .........	..........191
803-049C .........	..........105		121, 125, 129,	804-228C.........	..........77, 81	806-191C .........	..........27, 29, 31
803-052C .........	..........101		137, 195, 197,	805-010C.........	..........15, 185, 189	806-192C .........	..........223,225
803-053C .........	..........61, 101,201,233		199	805-017C.........	..........117, 207	807-023C .........	..........9
803-060C .........	..........51,55	804-012C .........	..........85, 219, 233, 235	805-019C.........	..........233	807-076C .........	..........85
803-068C .........	..........27, 29, 31, 183,	804-013C .........	..........9, 17, 21,23, 35,	805-021C.........	..........19, 67, 69, 71	807-106C .........	..........109
	187, 191		37, 39, 41,43,	805-031C.........	..........91, 107	807-119C .........	..........87
803-078C .........	..........137, 139		45, 47, 49, 51,	805-035C.........	..........17, 19, 21	807-125C .........	..........109
803-086C .........	..........197		53, 55, 57, 59,	805-043C.........	..........117, 207	807-159C .........	..........61,202
803-088C .........	..........43, 145, 191		65, 77, 81,85,	805-045C.........	..........101, 109, 201	807-187C .........	..........77, 81
803-114C .........	..........177		91,93, 97, 99,	805-060C.........	..........231	807-236C .........	..........77, 81
803-147C .........	..........19, 21,78, 82,		141, 143, 155,	805-063C.........	..........87	807-256C .........	..........78, 82
	197		157, 159, 161,	805-064C.........	..........49, 51,53, 55,	807-278C .........	..........121, 123, 125,
803-159C .........	..........233		163, 183, 187,		57, 59, 61, 199,		127, 129, 131,
803-169C .........	..........17, 21,85, 91,		195, 199, 215,		201		133, 135, 137,
	93, 95, 97, 103,		217, 219, 233,	805-065C.........	..........17, 19, 21,59,		139,141
	105, 107, 115,		235		65, 195	807-284C .........	..........77, 81
	123, 127, 131,	804-014C .........	..........107, 121, 125,	805-067C.........	..........121, 123, 125,	807-301C .........	..........51,55
	133, 135, 139,		129, 137, 185,		127, 129, 131,	807-304C .........	..........93
	141, 197		189		137, 139	807-355C .........	..........95
803-171C .........	..........133	804-015C .........	..........49, 51,57, 59,	805-088C.........	..........45, 47	807-356C .........	..........95
803-177C .........	..........23, 33, 49, 51,		61,87, 107, 117,	805-104C.........	..........61,201	808-062C .........	..........197
	57, 59, 93, 95,		119, 161,183,	805-109C.........	..........121, 123, 125,	808-147C .........	..........17, 21,65, 197
	97, 111, 183,		187, 199, 201,		127, 129, 131,	808-148C .........	..........17, 21,57, 59,
	187, 195, 202		207, 231		137, 139		65, 195
803-181C .........	..........9, 13, 17, 21,55,	804-016C .........	..........49, 51,53, 55,	805-126C.........	..........49, 51,53, 55,	808-149C .........	..........17, 21,65, 195,
	67, 69, 215		57, 59, 78, 82,		57, 59, 199		199
803-187C .........	..........19		113, 199	805-127C.........	..........61,67, 201	808-150C .........	..........53, 55, 57, 59, 61
803-193C .........	..........11, 13, 17, 53,	804-017C .........	..........49, 51,57, 59,	805-143C.........	..........67	808-151C .........	..........57, 59, 65, 195
	61, 117, 119,		61,103, 105,	805-161C.........	..........55	808-152C .........	..........49, 51,53, 55,
	202, 207		115, 117, 183,	805-177C.........	..........201		65, 195
803-194C .........	..........43		187, 197, 199,	805-180C.........	..........49, 55, 57, 59,	808-153C .........	..........65, 195
803-195C .........	..........183, 185, 187,		201,231		61,87, 199, 202	, 808-154C .........	..........65, 195
	189	804-019C .........	..........117		231	808-155C .........	..........65, 195
803-196C .........	..........117	804-021C .........	..........91,137, 139,	805-183C.........	..........121, 123, 125,	808-156C .........	..........49, 51,65
803-199C .........	..........191, 199		141, 231		127, 129, 131,	808-222C .........	..........17, 21,61
803-209C .........	..........11,78, 82, 85,	804-022C .........	..........21,23, 27, 29,		137, 139	808-223C .........	..........17, 21,57, 59
	93, 95, 97, 121,		31,67, 69, 71,	805-195C.........	..........202	808-224C .........	..........17, 21
	125, 129, 137		85, 88, 91, 117,	805-234C.........	..........201	808-225C .........	..........17, 21
803-219C .........	..........73, 75		119, 121, 123,	805-235C.........	..........61	808-249C .........	..........65
803-229C .........	..........121, 125, 129,		125, 127, 129,	805-240C.........	..........45, 47, 197, 202	808-251C .........	..........65, 199
	137, 139, 141		131, 133, 135,	805-250C.........	..........87	808-262C .........	..........202
803-230C .........	..........23, 27, 29, 31,		137, 139, 141,	805-255C.........	..........67, 69, 71	808-276C .........	..........65
	91,95		143, 155, 157,	805-278C.........	..........87	808-277C .........	..........77, 81
803-234C .........	..........173, 175, 177		159	805-290C.........	..........87	808-304C .........	..........199
803-263C .........	..........9, 17	804-023C .........	..........9, 13, 67, 69, 71	805-331C.........	..........117, 207	808-314C .........	..........199
803-268C .........	..........15, 19, 24, 77, 81	804-025C .........	..........9, 17, 21,69, 71,	805-335C.........	..........87	808-395C .........	..........85
803-293C .........	..........95		101, 233	805-363C.........	..........133, 135, 141	810-037C .........	..........151,153
803-302C .........	..........77, 81	804-029C .........	..........19, 67, 69, 71,	805-385C.........	..........107	810-196C .........	..........163, 231
803-312C .........	..........19		103, 115	805-417C.........	..........121, 125, 129,	810-197C .........	..........163
803-360C .........	..........33	804-036C .........	..........49, 51, 185, 189,		137	810-210C .........	..........179
803-374C .........	..........33, 78, 82		215, 217	805-428C.........	..........53	810-273C .........	..........24, 153
803-383C .........	..........73	804-040C .........	..........87	805-432C.........	..........123, 127, 131,	810-304C .........	..........67, 147, 149
804-006C .........	..........23, 49, 51,61,	804-041C .........	..........121, 125, 129,		133, 135, 139,	810-305C .........	..........67, 147, 149
	91,93, 97, 163,		137		141	810-306C .........	..........67, 149
	201	804-055C .........	..........117, 207	805-435C.........	..........85	810-326C .........	..........171
804-007C .........	..........24, 49, 51, 77,	804-061C .........	..........62	805-436C.........	..........133, 135, 141	810-327C .........	..........169
	81,95, 163	804-063C .........	..........71	806-052C.........	..........27, 29, 31,85	810-328C .........	..........167
804-009C .........	..........9, 15, 19, 27, 29,	804-075C .........	..........23, 93, 97	806-053C.........	..........17, 21, 117	810-345C .........	..........163
	31, 103, 115,	804-078C .........	..........109	806-073C.........	..........49, 51,57, 59,	810-456C .........	..........181
	125, 127, 129,	804-085C .........	..........19		183, 187, 195,	810-556C .........	..........24, 151
	131, 135, 155,	804-093C .........	..........201		199, 217, 235	810-696C .........	..........219
	157, 159, 161,	804-094C .........	..........133, 135, 141	806-083C.........	..........23	810-719C .........	..........173
	185, 189, 191,	804-095C .........	..........117	806-084C.........	..........23	810-720C .........	..........175
	199, 215, 217,	804-100C .........	..........87	806-102C.........	..........9, 13, 17, 21,53	, 810-721C .........	..........177
	219	804-111C .........	..........97		55, 67, 69, 215	810-804C .........	..........155, 157, 159,
		804-113C .........	..........207	806-103C.........	..........231		161

Part Number Index (continued)

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
810-813C .........	..........155, 157, 159,	814-259C .........	..........111	817-776C.........	..........77, 81	822-032C.........	..........49, 51,57, 59,
	161	814-260C .........	..........87, 111	817-777C.........	..........77, 81		199, 201
810-822C .........	..........69, 71, 147, 149	814-261C .........	..........111	817-778C.........	..........51,55	822-033C.........	..........201
810-823C .........	..........69, 71, 147, 149	814-266C .........	..........71	817-787C.........	..........85	822-080C.........	..........101,233
810-824C .........	..........69, 71, 149	814-384C .........	..........67, 69	817-789C.........	..........77, 81	822-119C.........	..........49, 51,57, 59,
811-059C .........	..........155, 159, 161	814-385C .........	..........67, 69	817-794C.........	..........77, 81		199, 201
811-063C .........	..........157	814-386C .........	..........67, 69	817-795C.........	..........77, 81	822-168C.........	..........73
811-065C .........	..........151, 163	814-400C .........	..........135, 145	817-796C.........	..........78, 81	822-169C.........	..........73
811-069C .........	..........151	814-502C .........	..........71	817-797C.........	..........78, 81	822-170C.........	..........111, 133, 137,
811-073C .........	..........155, 159, 161	814-503C .........	..........71	817-798C.........	..........78, 82		139, 141, 145
811-077C .........	..........151, 153	814-518C .........	..........67, 69	817-800C.........	..........78, 82	822-175C.........	..........57, 59, 199
811-078C .........	..........147, 149, 151,	814-552C .........	..........201	817-801C.........	..........77, 81	822-215C.........	..........101
	153, 163	814-560C .........	..........67, 69	817-803C.........	..........77, 81	822-216C.........	..........201
811-088C .........	..........151, 153, 155,	815-001C .........	..........233	817-809C.........	..........27, 29, 31	822-227C.........	..........77, 81
	157, 159, 161,	815-228C .........	..........73, 75	817-810C.........	..........27, 29, 31	822-239C.........	..........85
	219	815-255C .........	..........101, 103, 115	817-811C.........	..........78, 82	822-240C.........	..........61,73, 75, 201
811-091C .........	..........155, 157, 159,	816-009C .........	..........117, 207	817-815C.........	..........27, 29, 31	822-259C.........	..........201
	161	816-014C .........	..........233	817-816C.........	..........27	823-435C.........	..........217
811-133C .........	..........163	816-035C .........	..........71,201	817-822C.........	..........77, 81	823-462C.........	..........221
811-147C .........	..........149, 163	816-052C .........	..........15, 17, 19, 21	817-823C.........	..........77, 81	823-463C.........	..........221
811-150C .........	..........147, 149, 151,	816-144C .........	..........191	817-824C.........	..........77, 81	82464 ..............	..........169, 171
	153, 163, 219	816-161C .........	..........185, 187, 189	817-826C.........	..........77	82598 ..............	..........167
811-268C .........	..........155, 157, 159,	816-166C .........	..........231	817-827C.........	..........87	828-046C.........	..........207
	161	816-173C .........	..........109	817-829C.........	..........77, 81	828-057C.........	..........103, 115
811-269C .........	..........155, 157	816-266C .........	..........15, 19	817-830C.........	..........27, 29, 31	828-058C.........	..........103, 115
811-287C .........	..........163	816-302C .........	..........87	817-836C.........	..........78, 82	828-059C.........	..........103, 115
811-324C .........	..........147, 151	816-306C .........	..........61,202	817-838C.........	..........78, 82	828-060C.........	..........103, 115
811-336C .........	..........33	816-368C .........	..........87	817-841C.........	..........77, 81	829-048C.........	..........183, 185, 187,
811-394C .........	..........147, 149, 151,	816-429C .........	..........78, 82	817-846C.........	..........77, 81		189, 211,217
	153, 219	816-467C .........	..........183, 185, 187	817-849C.........	..........78, 82	829-089C.........	..........191
811-488C .........	..........149	816-529C .........	..........73, 75	817-851C.........	..........78, 82	829-104C.........	..........191,217
811-494C .........	..........163	816-567C .........	..........15, 19	817-857C.........	..........78, 82	829-105C.........	..........191,217
811-502C .........	..........153	816-568C .........	..........15, 19	817-862C.........	..........81	829-107C.........	..........185, 189
811-512C .........	..........219	816-656C .........	..........23	817-867C.........	..........78, 82	829-111C.........	..........217
811-556C .........	..........157	816-687C .........	..........153	817-886C.........	..........145	829-114C.........	..........217
811-690C .........	..........149	816-793C .........	..........93, 97	817-894C.........	..........93	829-126C.........	..........183, 185, 187,
811-725C .........	..........147	816-831C .........	..........93	817-895C.........	..........93		189, 213
811-773C .........	..........161	816-841C .........	..........97	817-896C.........	..........93	829-147C.........	..........217
811-807C .........	..........155, 159, 161	816-845C .........	..........95	817-898C.........	..........19	829-152C.........	..........223, 225
811-826C .........	..........165	817-025C .........	..........49, 51,53, 55,	817-901C.........	..........19	830-022C.........	..........223, 225
811-827C .........	..........165		59, 197	817-967C.........	..........78, 82	830-028C.........	..........191
811-856C .........	..........147, 149	817-083C .........	..........121, 125, 129,	817-991C.........	..........78, 82	830-029C.........	..........223, 225
811-857C .........	..........155, 159, 161		137	818-055C.........	..........27, 29, 31,43	830-049C.........	..........217
811-913C .........	..........165	817-084C .........	..........85, 107, 123,	818-130C.........	..........155, 157, 159,	830-052C.........	..........183, 185
811-914C .........	..........165		127, 131, 133,		161	830-061C.........	..........191
811-915C .........	..........165		135, 139, 141	818-188C.........	..........235	830-065C.........	..........191
811-916C .........	..........165	817-123C .........	..........78, 82	818-323C.........	..........11	830-086C.........	..........191
811-917C .........	..........165	817-145C .........	..........231	818-339C.........	..........235	830-094C.........	..........217
811-918C .........	..........165	817-191C .........	..........109	818-344C.........	..........191	830-121C.........	..........191
811-919C .........	..........165	817-264C .........	..........91	818-349C.........	..........235	830-123C.........	..........191,217
812-327C .........	..........87	817-268C .........	..........91	818-402C.........	..........235	830-127C.........	..........191,223, 225
812-391C .........	..........45, 47	817-269C .........	..........91	818-525C.........	..........103, 115	830-142C.........	..........191
812-398C .........	..........133, 135, 141	817-271C .........	..........11	818-587C.........	..........235	830-155C.........	..........185
812-442C .........	..........61,202	817-272C .........	..........11	818-619C.........	..........155, 157, 159,	830-165C.........	..........217
814-034C .........	..........145	817-330C .........	..........145		161	830-180C.........	..........217
814-113C .........	..........111	817-331C .........	..........111	818-682C.........	..........235	830-183C.........	..........217
814-115C .........	..........201	817-349C .........	..........87	818-855C.........	..........202	830-186C.........	..........185, 189
814-116C .........	..........201	817-406C .........	..........49, 51,57, 59,	820-018C.........	..........207	830-192C.........	..........191,217
814-161C .........	..........183		61, 197, 199, 201 820-074C.........		..........117	830-216C.........	..........11
814-173C .........	..........87, 111	817-423C .........	..........57, 199	820-094C.........	..........233	830-237C.........	..........191
814-174C .........	..........121, 123, 125,	817-456C .........	..........183, 187	820-133C.........	..........117	830-258C.........	..........191
	127, 129, 131,	817-480C .........	..........85, 93, 95	820-156C.........	..........207	830-270C.........	..........187
	135, 145	817-513C .........	..........117, 207	820-180C.........	..........117	830-276C.........	..........33
814-175C .........	..........111	817-541C .........	..........111	820-287C.........	..........88	830-295C.........	..........217
814-210C .........	..........67, 69	817-615C .........	..........103, 105, 115	820-327C.........	..........119	830-324C.........	..........183, 185, 187,
814-238C .........	..........121, 123, 125,	817-624C .........	..........23	820-331C.........	..........119		189, 217
	127, 129, 131,	817-634C .........	..........215, 217	821-069C.........	..........91,93, 95, 97	830-325C.........	..........183, 185, 187,
	145	817-724C .........	..........15	822-020C.........	..........61,73, 117, 201		189, 217
814-244C .........	..........145	817-725C .........	..........15, 19	822-021C.........	..........117, 207	830-327C.........	..........183, 185, 187
814-257C .........	..........87, 111	817-772C .........	..........77, 81	822-030C.........	..........101,233	830-329C.........	..........187, 189, 217
814-258C .........	..........111	817-774C .........	..........77, 81			830-332C.........	..........217

Part Number Index (continued)

Part Number	Page	Part Number	Page	Part Number	Page	Part Number	Page
830-345C .........	..........183, 187, 189,	837-186C .........	..........78, 82	858-004C.........	..........155, 157, 159,	dwg 68049 ........	.........221
	217	837-234C .........	..........78, 82		161	dwg 68051 ........	.........217
830-351C .........	..........183, 185, 187,	837-235C .........	..........78, 82	858-005C.........	..........155, 157, 159,	dwg 68053 ........	.........219
	189	837-364C .........	..........78		161	dwg 68054 ........	.........223
830-364C .........	..........217	837-386C .........	..........78, 82	858-708C.........	..........215	dwg 68055 ........	.........225
830-365C .........	..........217	838-160C .........	..........235	861-133C.........	..........149	dwg12024 .........	..........181
830-369C .........	..........217	838-161C .........	..........235	890-005C.........	..........231	dwg12027 .........	..........179
830-370C .........	..........217	838-265C .........	..........235	890-143C.........	..........231	dwg15489 .........	..........211
830-374C .........	..........217	838-266C .........	..........235	890-182C.........	..........9	dwg15498 .........	..........167, 169
830-383C .........	..........191	838-267C .........	..........235	890-245C.........	..........9	dwg15499 .........	..........171
830-385C .........	..........183, 185, 187,	838-362C .........	..........69, 71	890-308C.........	..........97	dwg17663 .........	..........109
	189	838-363C .........	..........235	890-311C.........	..........35, 37	dwg21855 .........	.........99
830-387C .........	..........183, 187	838-482C .........	..........119, 207	890-312C.........	..........35, 37	dwg21993 .........	.........111
830-389C .........	..........183, 185, 187,	838-595C .........	..........71	890-389C.........	..........117, 207	dwg22747 .........	..........101
	217	841-002C .........	..........151	890-390C.........	..........35, 37	dwg22748 .........	.........115
830-406C .........	..........207	841-053C .........	..........147	890-391C.........	..........35, 37	dwg22773 .........	..........103
830-424C .........	..........87	841-099C .........	..........151	890-395C.........	..........23	dwg22774 .........	.........119
830-426C .........	..........223, 225	841-103C .........	..........151	890-396C.........	..........23	dwg25314 .........	.........15
830-458C .........	..........217	841-116C .........	..........149	890-466C.........	..........88	dwg27304 .........	..........107
830-459C .........	..........217	841-117C .........	..........149	890-521C.........	..........191	dwg29096 .........	..........105
830-461C .........	..........217	841-118C .........	..........147, 149	890-524C.........	..........121, 125, 129,	dwg29331 .........	.........121
830-462C .........	..........217	841-119C .........	..........149		137	dwg29332 .........	..........125
830-464C .........	..........223, 225	841-120C .........	..........149	890-598C.........	..........121, 125, 129,	dwg29333 .........	..........129
830-473C .........	..........217	841-121C .........	..........149		137	dwg29590 .........	..........143
830-474C .........	..........217	841-122C .........	..........149	890-614C.........	..........233	dwg29707 .........	.........87
831-077C .........	..........183, 187, 195	841-123C .........	..........149	890-624C.........	..........23	dwg29716 .........	..........137
831-078C .........	..........183, 185, 187,	841-124C .........	..........163	890-648C.........	..........35, 37	dwg29781 .........	..........151
	189, 209	841-125C .........	..........163	890-669C.........	..........15, 19	dwg29868 .........	.........9
831-101C .........	..........155, 157, 159,	841-133C .........	..........149	890-891C.........	..........23	dwg29872 .........	.........231
	161	841-171C .........	..........163	890-892C.........	..........23	dwg29875 .........	.........13
831-110C .........	..........185, 189, 191,	841-196C .........	..........151, 153, 157 890-899C.........		..........23	dwg29878 .........	.........11
	197, 202	841-204C .........	..........163	891-109C.........	..........155, 157, 159,	dwg29880 .........	.........67
831-131C .........	..........217, 219	841-361C .........	..........147, 149		161	dwg29883 .........	.........73
831-132C .........	..........217	841-374C .........	..........163	891-110C.........	..........155, 157, 159,	dwg29884 .........	.........53
832-042C .........	..........191	841-397C .........	..........163		161	dwg29893 .........	.........49
832-051C .........	..........191,223, 225	841-461C .........	..........151	891-118C.........	..........77, 81	dwg29899 .........	.........57
832-052C .........	..........191	841-462C .........	..........151	891-119C.........	..........77, 81	dwg29901 .........	.........81
832-053C .........	..........191	841-469C .........	..........163	891-120C.........	..........81	dwg29902 .........	..........183
832-054C .........	..........191	841-481C .........	..........153	891-121C.........	..........81	dwg29907 .........	.........213
832-055C .........	..........191	841-486C .........	..........147	891-122C.........	..........33, 78, 82	dwg29908 .........	..........195
832-056C .........	..........191	841-529C .........	..........153	891-131C.........	..........23	dwg29935 .........	.........91
832-057C .........	..........191	841-540C .........	..........165	891-153C.........	..........23, 33	dwg29937 .........	..........147
832-059C .........	..........191	841-541C .........	..........165	891-186C.........	..........137, 139, 141	dwg29939 .........	..........149
833-179C .........	..........227	841-542C .........	..........165	891-192C.........	..........77, 81	dwg29940 .........	..........163
833-210C .........	..........227, 229	841-543C .........	..........165	891-194C.........	..........33	dwg29941 .........	..........187
833-321C .........	..........227, 229	841-653C .........	..........155, 157, 159, 891-204C.........		..........77, 81	dwg29942 .........	..........191
833-407C .........	..........227, 229		161	891-259C.........	..........235	dwg29948 .........	.........65
833-452C .........	..........227, 229	841-814C .........	..........155, 157, 159, 891-313C.........		..........155, 157, 159,	dwg29951 .........	.........33
833-683C .........	..........39, 41		161		161	dwg29955 .........	.........23
833-684C .........	..........39, 41,43	841-815C .........	..........155	891-314C.........	..........155, 157, 159,	dwg29956 .........	.........27
833-690C .........	..........39, 41	841-838C .........	..........219		161	dwg29957 .........	.........227
833-694C .........	..........39, 41,43	841-848C .........	..........157, 161	891-738C.........	..........95, 97	dwg29960 .........	.........235
833-696C .........	..........39, 41,43	841-849C .........	..........155	990-021R.........	..........33	dwg29962 .........	.........35
833-697C .........	..........39, 41,43	841-850C .........	..........159	990-078R.........	..........217	dwg29963 .........	.........45
837-021C .........	..........97	842-193C .........	..........88	990-079R.........	..........217	dwg29979 .........	.........85
837-022C .........	..........97	843-012C .........	..........43	990-080R.........	..........191	dwg31276 .........	.........117
837-057C .........	..........78, 82	843-191C .........	..........87	990-081R.........	..........191,217	dwg31277 .........	.........17
837-059C .........	..........77	848-048C .........	..........67	990-082R.........	..........183, 185, 187,	dwg31280 .........	.........29
837-065C .........	..........78, 82	848-248C .........	..........23		189, 191,217	dwg31323 .........	.........31
837-071C .........	..........95	848-492C .........	..........235	990-109R.........	..........191	dwg31356 .........	.........209
837-072C .........	..........95	848-493C .........	..........235	990-181R.........	..........183, 185, 187,	dwg31360 .........	.........205
837-073C .........	..........95	848-494C .........	..........235		189	dwg31517 .........	..........131
837-077C .........	..........95	848-541C .........	..........235	990-253R.........	..........27, 29, 31,91	dwg31518 .........	..........123
837-083C .........	..........95	848-542C .........	..........235	A-147 ...............	..........195	dwg31519 .........	.........127
837-092C .........	..........77	848-555C .........	..........183, 185, 187, ACE-10507 ......		..........217	dwg31520 .........	..........139
837-126C .........	..........78, 82		189, 235	BO-47 ..............	..........233	dwg31708 .........	.........51
837-127C .........	..........78, 82	848-708C .........	..........69	CP18999-EPR .	..........191	dwg31713 .........	.........55
837-148C .........	..........78, 82	850-038C .........	..........219	CR14971 .........	..........101	dwg31721 .........	..........199
837-160C .........	..........95, 97	851-385C .........	..........219	dwg 15481 .......	..........233	dwg31725 .........	.........201
837-164C .........	..........215	858-003C .........	..........155, 157, 159, dwg 31745 .......		..........189	dwg31731 .........	..........197
837-171C .........	..........62		161	dwg 68048 .......	..........215	dwg31744 .........	..........185